[Express]

day off today. so im trying to do the rear fog mod. i cant get the ac vent out worth shit. im sure i broke something and i already scratched the top of the fucking muppet.

please help. how the hell do you get the damn thing out??

[ECSTuning]

We have our installation instructions available for our boost gauge kit that may help with the vent removal:

http://www.ecstuning.com/stage/edoc/...structions.pdf

We also have a set of trim removal tools that can be handy for project like this:

http://www.ecstuning.com/BMW-E90-330...aign=postreply

[Express]

thanks for the link but its not the right side. i cant figure this crap out. it seems so easy but im obviously missing something simple.

[Express]

the problem area is the side closest to the door. how is it held in? im afraid if i keep monkeying around im going to be looking at a nice bill.

[Xiaofeng]

Hey Express705, take a look at these DIY threads to see if they help:

http://www.e90post.com/forums/showthread.php?t=26545
http://www.e90post.com/forums/showthread.php?t=75343

Work is blocking most of the pictures, so I can't see them at the moment, but they might come in handy. Good luck with the install!

[scanboy]

They hold on pretty tight, it's pretty difficult the first time. I find it easier if you stick in a flat head screw driver into the side closer to the door and just pull the screw driver (use a longer one). You can easily insert the screw driver if you just push the dash part down a bit, they are kinda soft. Hope this helps.

[Express]

thanks man im gonna go check it out. doubt ill get it though.

[Express]

scanboy can you be a bit more detailed?

[Express]

i got it. i gave it the old shut the eyes and rip it out.

came right out!

[iheartsole]

congrats. haha. are you putting cf?

[Express]

no i did the rear fog mod

[HermesRider]

Originally Posted by express705

i got it. i gave it the old shut the eyes and rip it out.

came right out!

I learned that is usually the best approach with trim (of all kinds)... it either comes out clean or you fuck it up good.

[t.nguyen]

Originally Posted by express705

no i did the rear fog mod

hey i actually just finished doing this mod like 10 mins ago a tip for once u get inside the module i used a pen tube cut it slightly taller than the white piece given for front fog light and i cut a plastic piece using junk like my mtec light case all i did was scored it and snap it then hot glued it haha its like 11:30 pm here and dark as hell out but i was excited to do it now i can tell those tailgaters to eff off haha

hope this helped u

[Express]

Originally Posted by HermesRider

I learned that is usually the best approach with trim (of all kinds)... it either comes out clean or you fuck it up good.

hahaha yeah

Originally Posted by t.nguyen

hey i actually just finished doing this mod like 10 mins ago a tip for once u get inside the module i used a pen tube cut it slightly taller than the white piece given for front fog light and i cut a plastic piece using junk like my mtec light case all i did was scored it and snap it then hot glued it haha its like 11:30 pm here and dark as hell out but i was excited to do it now i can tell those tailgaters to eff off haha

hope this helped u

thanks!!