about to buy wheels and need some advice

jnerenberg · 07-27-2009, 11:23 AM

So i've decided to get some v710's used. I have a question about offsets.

I have an e92 335i with ZSP suspension. which offsets will work better with my car?
will I have to fender roll with either?
how about spacers?
will I need longer lugs than stock?

option 1
front: 245 35 19
rear: 255 35 19

option 2
front: 235/35/19
rear: 265/30/19

VMRWheels · 07-27-2009, 03:06 PM

I would go with Option 2 if you are purchasing the following offsets; 19x8.5 +35 front and a 19x9.5 +33 rear. This setup will be a direct bolt-on fitment, no modifications or aftermarket hardware needed. All wheels will be sitting flush on all 4 corners. Depending on how "flush" you are looking to go, about a 5mm spacer can work.

-Charles@VMRWheels

jnerenberg · 07-27-2009, 03:24 PM

is it possible to run option 1 on my car though?

Topless 335i · 07-27-2009, 04:12 PM

I would definitely not run option 1.

VMRWheels · 07-27-2009, 04:15 PM

Quote:

Originally Posted by jnerenberg

is it possible to run option 1 on my car though?

Option 1 will work but the rears may be a bit stretched on a 9.5" wheel depending on which manufacturer you go with.

-Charles@VMRWheels

07-27-2009, 11:23 AM	#1
jnerenberg professional assassin 18 Rep 207 Posts Drives: 2008 e92 335i Join Date: Jun 2008 Location: New York iTrader: (4) Garage List 2008 335i [0.00]	about to buy wheels and need some advice So i've decided to get some v710's used. I have a question about offsets. I have an e92 335i with ZSP suspension. which offsets will work better with my car? will I have to fender roll with either? how about spacers? will I need longer lugs than stock? option 1 front: 245 35 19 rear: 255 35 19 option 2 front: 235/35/19 rear: 265/30/19 __________________ 2008 E92 335i---AW/CR/Grey Poplar
	Appreciate 0 Tweet Quote

07-27-2009, 03:06 PM	#2
VMRWheels BimmerPost Supporting Vendor 2080 Rep 25,980 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	I would go with Option 2 if you are purchasing the following offsets; 19x8.5 +35 front and a 19x9.5 +33 rear. This setup will be a direct bolt-on fitment, no modifications or aftermarket hardware needed. All wheels will be sitting flush on all 4 corners. Depending on how "flush" you are looking to go, about a 5mm spacer can work. -Charles@VMRWheels __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram
	Appreciate 0 Quote

07-27-2009, 03:24 PM	#3
jnerenberg professional assassin 18 Rep 207 Posts Drives: 2008 e92 335i Join Date: Jun 2008 Location: New York iTrader: (4) Garage List 2008 335i [0.00]	is it possible to run option 1 on my car though? __________________ 2008 E92 335i---AW/CR/Grey Poplar
	Appreciate 0 Quote

07-27-2009, 04:12 PM	#4
Topless 335i Captain 40 Rep 984 Posts Drives: AW E93 335i Join Date: Dec 2008 Location: SoCal iTrader: (2)	I would definitely not run option 1.
	Appreciate 0 Quote