Overheating= no boost

per · 08-04-2009, 02:42 PM

I was testing the new firmware and software and had a issue I never experienced before
I lost boost completely when doing a wot in 3d gear (DCT tranny), it flashed a warning that the motor was overheated,(both oil and watertemps where normal according to Performance steering wheel)
I stopped the car and started again, the procede was in walet mode, so the security seems to work fine.
I did have a code 10927, some fuel pump code
Next time I restarted the car it is back to normal.

What do you think, I guess it is not procede related, but has anyone experiance something similar, let me know

OpenFlash · 08-04-2009, 06:09 PM

Quote:

Originally Posted by per

I was testing the new firmware and software and had a issue I never experienced before
I lost boost completely when doing a wot in 3d gear (DCT tranny), it flashed a warning that the motor was overheated,(both oil and watertemps where normal according to Performance steering wheel)
I stopped the car and started again, the procede was in walet mode, so the security seems to work fine.
I did have a code 10927, some fuel pump code
Next time I restarted the car it is back to normal.

What do you think, I guess it is not procede related, but has anyone experiance something similar, let me know

What flashed a warning? I'm confused...

Shiv

rismo · 08-04-2009, 07:21 PM

I have had it recently. Radiator and heat exchanger was damaged after a shop installed my IC.

Never had it caused by a tune. (Have driven 3000 miles in one week with a procede under extreme circumstances on the road, no overheating issues. Tracking without oil cooler could give you a limp)

per · 08-05-2009, 03:36 AM

Quote:

Originally Posted by shiv@vishnu

What flashed a warning? I'm confused...

Shiv

The warning for motor overheating in the display flached red for 2-3 sec.

08-04-2009, 02:42 PM	#1
per Lieutenant 54 Rep 521 Posts Drives: M4 G82 Join Date: Jul 2007 Location: Sweden Gothenburg iTrader: (0)	Overheating= no boost I was testing the new firmware and software and had a issue I never experienced before I lost boost completely when doing a wot in 3d gear (DCT tranny), it flashed a warning that the motor was overheated,(both oil and watertemps where normal according to Performance steering wheel) I stopped the car and started again, the procede was in walet mode, so the security seems to work fine. I did have a code 10927, some fuel pump code Next time I restarted the car it is back to normal. What do you think, I guess it is not procede related, but has anyone experiance something similar, let me know
	Appreciate 0 Tweet Quote

08-04-2009, 07:21 PM	#3
rismo Captain 82 Rep 915 Posts Drives: BMW E92 335 Join Date: Jul 2008 Location: Europe iTrader: (0)	I have had it recently. Radiator and heat exchanger was damaged after a shop installed my IC. Never had it caused by a tune. (Have driven 3000 miles in one week with a procede under extreme circumstances on the road, no overheating issues. Tracking without oil cooler could give you a limp) __________________ BMW 335 E92 09 - Full options - DKG - MHD by Buraq - RB Next Gen - RB Inlets/Outlet - Forge Diverter Valves - AR Catless DP - Afe Intake - Helix IC - FuelIT Stage 2 LPFP - Ar Oil Cooler - PPK Water Cooler - M3 Suspension - JRZ RS1 Shocks - Eibach Pro Springs - Drexler LSD - BMW IS Exhaust - Carbon Endurance Brake Pads - Stainless Steel Brake Lines - M101 Wheels - Michelin PS2 - M-Tech Body - M-Strutbar BMW M550i G30 2019 - BM3
	Appreciate 0 Quote