ET24mm fronts on e9x?

phattbam · 08-10-2009, 05:08 PM

Anyone know if it's possible to fit 20x9 ET24 in the front of the coupe and 20x10 ET24 in the rears? or if not to shave the hub of the fronts to fit them?

JeffL · 08-10-2009, 05:11 PM

I run a 19x8.5 et25 in the front with no issue. The rear is where your going to have huge problems. You'll never get a 10 inch wheel with an et24 offset on the back on an e92 with out some major work.

phattbam · 08-10-2009, 05:14 PM

Quote:

Originally Posted by JeffL

I run a 19x8.5 et25 in the front with no issue. The rear is where your going to have huge problems. You'll never get a 10 inch wheel with an et24 offset on the back on an e92 with out some major work.

really?? an ET25 in the front.... is there room for BBK clearance?

PaulBailey@ltbmw · 08-10-2009, 05:15 PM

No way.
I do not think you'll be able to run a 19x9 ET25 in the front.
And be careful. . . Dont want to break your front fender. I've seen it happen before with a wheel setup that was too agressive.

JeffL · 08-10-2009, 05:23 PM

pictures here...

phattbam · 08-10-2009, 05:29 PM

^ does that leave any room for BBK?

JeffL · 08-10-2009, 07:16 PM

Quote:

Originally Posted by phattbam

^ does that leave any room for BBK?

no clue. it would depend on the wheel your using not the offset.

phattbam · 08-10-2009, 07:23 PM

Quote:

Originally Posted by JeffL

no clue. it would depend on the wheel your using not the offset.

true. thanks

08-10-2009, 05:08 PM	#1
phattbam Major General 180 Rep 5,817 Posts Drives: '17 Protonic Blue i3 REx Join Date: Sep 2007 Location: sf area iTrader: (21)	ET24mm fronts on e9x? Anyone know if it's possible to fit 20x9 ET24 in the front of the coupe and 20x10 ET24 in the rears? or if not to shave the hub of the fronts to fit them?
	Appreciate 0 Tweet Quote

08-10-2009, 05:11 PM	#2
JeffL Major 36 Rep 1,202 Posts Drives: C63 Join Date: Jan 2008 Location: Massachusetts iTrader: (1)	I run a 19x8.5 et25 in the front with no issue. The rear is where your going to have huge problems. You'll never get a 10 inch wheel with an et24 offset on the back on an e92 with out some major work. __________________ no sig.
	Appreciate 0 Quote

08-10-2009, 05:15 PM	#4
PaulBailey@ltbmw General 678 Rep 26,876 Posts Drives: 2-325 330 2-335 2-Z4 2-135 X5d Join Date: Mar 2007 Location: Huntington Beach, CA iTrader: (34) Garage List 2008 BMW 335i E90 [7.00] 2011 BMW 335i E92 [7.96]	No way. I do not think you'll be able to run a 19x9 ET25 in the front. And be careful. . . Dont want to break your front fender. I've seen it happen before with a wheel setup that was too agressive.
	Appreciate 0 Quote

08-10-2009, 05:23 PM	#5
JeffL Major 36 Rep 1,202 Posts Drives: C63 Join Date: Jan 2008 Location: Massachusetts iTrader: (1)	pictures here... __________________ no sig.
	Appreciate 0 Quote

08-10-2009, 05:29 PM	#6
phattbam Major General 180 Rep 5,817 Posts Drives: '17 Protonic Blue i3 REx Join Date: Sep 2007 Location: sf area iTrader: (21)	^ does that leave any room for BBK?
	Appreciate 0 Quote