Kenwood kvt-729dvdy install e90

grimplinyi · 10-24-2009, 05:56 PM

Hy!

I installed it a kenwood kvt-729!

there was two problems:

1.there is not pdc sound
2. there is not a "gong" sound

on a what kind of manner are these problems repairable?

1.pdc interface building in
http://www.kolumbus24.com/default.as...em&ST=1&IT=980

2. ????

excuse me for the bad composition.

I wait for your answer!

thank you

Zsolt

iBeech · 10-25-2009, 11:17 AM

Sorry, but why would you do such a think to your OEM dash :'(

In responce to your question- the OEM PDC is played over the existing sound coming from the stereo- from my understanding, any 3rd party PDC would have to use a mute cable on the stereo. This would stop playback of the stereo and play the boing sound you are missing.

grimplinyi · 10-25-2009, 11:56 AM

e90 pdc and the original one radio communication can bus happens on a system.

Kenwood kvt-729 cab does not can bus communication. There are not pdc and not gong sound.

I would like to know it, this
http://www.kolumbus24.com/default.as...em&ST=1&IT=980
the pdc solves it sound and the gong sound?

Excuse me for the translation.

335iheLLraiseR · 10-25-2009, 02:04 PM

Technic?

grimplinyi · 11-02-2009, 04:56 AM

The system is ready.
The pdc and a gong work.
where find like that +12volt what there is then when the key is within?

iBeech · 11-02-2009, 07:48 AM

Quote:

Originally Posted by grimplinyi

The system is ready.
The pdc and a gong work.
where find like that +12volt what there is then when the key is within?

You'll find the cable plugged into the cigarette lighter. You can pull off that

grimplinyi · 11-02-2009, 10:09 AM

Quote:

Originally Posted by iBeech

You'll find the cable plugged into the cigarette lighter. You can pull off that

there is not cigarette my packet. it is not on ignition?

10-24-2009, 05:56 PM	#1
grimplinyi New Member 2 Rep 27 Posts Drives: BMW 318d E90 Join Date: Sep 2009 Location: n47 iTrader: (0)	Kenwood kvt-729dvdy install e90 Hy! I installed it a kenwood kvt-729! there was two problems: 1.there is not pdc sound 2. there is not a "gong" sound on a what kind of manner are these problems repairable? 1.pdc interface building in http://www.kolumbus24.com/default.as...em&ST=1&IT=980 2. ???? excuse me for the bad composition. I wait for your answer! thank you Zsolt Last edited by grimplinyi; 11-02-2009 at 03:36 AM..
	Appreciate 0 Tweet Quote

10-25-2009, 11:17 AM	#2
iBeech Captain 119 Rep 945 Posts Drives: BMW 520D F11 2015 Join Date: Sep 2009 Location: Sandbach iTrader: (1) Garage List 2015 BMW 520D Touri ... [10.00] 2016 BMW 320D Touring [0.00]	Sorry, but why would you do such a think to your OEM dash :'( In responce to your question- the OEM PDC is played over the existing sound coming from the stereo- from my understanding, any 3rd party PDC would have to use a mute cable on the stereo. This would stop playback of the stereo and play the boing sound you are missing.
	Appreciate 0 Quote

10-25-2009, 11:56 AM	#3
grimplinyi New Member 2 Rep 27 Posts Drives: BMW 318d E90 Join Date: Sep 2009 Location: n47 iTrader: (0)	e90 e90 pdc and the original one radio communication can bus happens on a system. Kenwood kvt-729 cab does not can bus communication. There are not pdc and not gong sound. I would like to know it, this http://www.kolumbus24.com/default.as...em&ST=1&IT=980 the pdc solves it sound and the gong sound? Excuse me for the translation.
	Appreciate 0 Quote

11-02-2009, 04:56 AM	#5
grimplinyi New Member 2 Rep 27 Posts Drives: BMW 318d E90 Join Date: Sep 2009 Location: n47 iTrader: (0)	e90 The system is ready. The pdc and a gong work. where find like that +12volt what there is then when the key is within?
	Appreciate 0 Quote