Question about some AC Schnitzer spacers I have.

m3power13 · 01-11-2007, 09:10 PM

When I bought my AC Schnitzer wheels for my E36 328i they sent spacers with the wheels. 8MM I believe. My question is will these (or how can I find out) if these spacers can be used on my E92 328i (due to arrive in a week or so,

). The stock sports package wheels seemed pushed in a bit and I would like to space them out a bit.

The package says something, but it's in German with some crazy numbering.

Anybody have an answer?

Thanks

Chesmu · 01-11-2007, 09:13 PM

as far as spacers that thin are concerned, makes ure the lip is sufficient to hold your tire rim... see the www.rogueengineering.com section on wheel spacers for details.

the bolt pattern should work, though you will likely need longer bolts.

m3power13 · 01-11-2007, 10:08 PM

Thanks for the info. Upon further inspection the spacers say 7MM on them and looking at RE website they look basically the same. Also, each spacer came with longer bolts.

Here are some quick pics I snapped, maybe they can answer any questions about the lip. What do you think?

01-11-2007, 09:10 PM	#1
m3power13 Lieutenant 113 Rep 531 Posts Drives: E92 M3 Stripper Join Date: Nov 2006 Location: Raleigh, NC iTrader: (0)	Question about some AC Schnitzer spacers I have. When I bought my AC Schnitzer wheels for my E36 328i they sent spacers with the wheels. 8MM I believe. My question is will these (or how can I find out) if these spacers can be used on my E92 328i (due to arrive in a week or so, ). The stock sports package wheels seemed pushed in a bit and I would like to space them out a bit. The package says something, but it's in German with some crazy numbering. Anybody have an answer? Thanks
	Appreciate 0 Tweet Quote

01-11-2007, 09:13 PM	#2
Chesmu Brigadier General 96 Rep 3,011 Posts Drives: 2013 X6 Join Date: Dec 2005 Location: Phoenix,AZ iTrader: (2) Garage List 2006 330i [0.00] 2006 330i [0.00]	as far as spacers that thin are concerned, makes ure the lip is sufficient to hold your tire rim... see the www.rogueengineering.com section on wheel spacers for details. the bolt pattern should work, though you will likely need longer bolts. __________________ "Teach the ignorant. Ignore the stupid."
	Appreciate 0 Quote

01-11-2007, 10:08 PM	#3
m3power13 Lieutenant 113 Rep 531 Posts Drives: E92 M3 Stripper Join Date: Nov 2006 Location: Raleigh, NC iTrader: (0)	Thanks for the info. Upon further inspection the spacers say 7MM on them and looking at RE website they look basically the same. Also, each spacer came with longer bolts. Here are some quick pics I snapped, maybe they can answer any questions about the lip. What do you think?
	Appreciate 0 Quote