|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
BT scanner Codes
|
 |
| 12-04-2009, 08:23 PM | #1 |
|
Lieutenant
 43
Rep 555
Posts |
BT scanner Codes
I been receiving a CEL at WOT recently but clears when i restart..
I finally plugged in my BT scanner and got: Also, how do I find 'tuner codes' or will it be in the same area where the short test is? Short Test MSD80/MSD81 Engine module for N54 Current Fault Codes 2AAF: 2AAF Fuel pump, plausibility Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption Freeze Frame Information Event 1Odometer 58008kms 36044miles fuel pressure before mass control valve 3,099.12 hPa Engine speed 5,984.00 rpm voltage Kl. 87 13.91 V injected mass of fuel 106.00 l/h 2A87: 2A87 Outlet-Vanos variable cam control test, mechanics Error will cause a warning light Error is not currently present Test conditions have been completed Freeze Frame Information Event 1Odometer 59008kms 36665miles Engine speed 384.00 rpm camshaft outlet -44.50 °CRK camshaft outlet nominal value -44.50 °CRK Engine temperature -39.00 °C Event 2Odometer 59152kms 36755miles Engine speed 96.00 rpm camshaft outlet -41.12 °CRK camshaft outlet nominal value -41.12 °CRK Engine temperature -45.75 °C 3100: 3100 boost-pressure control, deactivation Error will not cause a warning light Error is not currently present Test conditions have been completed Car Access System 3 Current Fault Codes A0B0: ECU input brake lights Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption Central information display Current Fault Codes 00A4: Error will not cause a warning light Error is currently present Test conditions have been completed Timeout MOST / CAN gateway CD73/MD73 Current Fault Codes E18F: Central registry does not match with debit configuration (Error_Registry_New) Error will not cause a warning light Error is not currently present Test conditions have been completed |
| 12-04-2009, 08:48 PM | #2 |
|
Lieutenant Colonel
 66
Rep 1,884
Posts |
None of those look like tuner codes but your car needs to be worked on. Looks like an HPFP issue and the Vanos needs to be serviced. The 3100 is usually trigger when a limp mode comes on. I have no clue what the E18F is.
__________________
My Youtube Channel
|
|
Appreciate
0
|
| 12-04-2009, 08:52 PM | #3 |
|
Lieutenant
43
Rep 555
Posts |
Thanks Brad, I reviewed the code list already but wasn't exactly sure.
If i bring it in without the CEL flashing, will they fix it? I brought it in once shortly after I bought my car and was told that if it goes away after car restart, dont worry. |
|
Appreciate
0
|
| 12-04-2009, 09:39 PM | #4 |
|
Lieutenant Colonel
66
Rep 1,884
Posts |
I think they will not fix the car without codes showing so dont erase them yet. Maybe someone else can chime in on the last code you have there. Not sure what that one means but I am going to look into it. If the car is running ok otherwise they may be right that it is not a big deal if it goes away. that happened with my misfire CEL.
__________________
My Youtube Channel
|
|
Appreciate
0
|
| 02-02-2010, 12:40 AM | #5 |
|
Captain
73
Rep 613
Posts |
I just got all of the codes that happened to you. Did you get it resolved?
What was causing the A0B0 code? ECU input brake lights? WTH is that? Any help would be appreciated. Thanks. A0B0: ECU input brake lights Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
