How much work to fit 19x9.5" ET33 all-around on E92/E93?

ClayMan · 01-31-2010, 11:13 PM

E92 and E93 are the same right?

How much work would it be to fit 19x9.5" ET33 all-around on a E93?

Tire size: 265/30-19 preferred, or 255/30-19 if I must.
Suspension: Stock non-sport, no camber plates, but might may lower in the future (e.g. just springs)
Fender rolling: mild - i.e. don't want to pull / warp / deform the fenders
Alignment: How much negative camber do I need? I'm assuming I would knock out the strut tower alignment pins and max out negative camber in the front (I'm guessing this won't give me much more than -1.0º, is that right?)

Is this possible? Any thoughts / experiences to chime in?

m-technik · 02-01-2010, 12:18 AM

Quote:

Originally Posted by ClayMan

E92 and E93 are the same right?

How much work would it be to fit 19x9.5" ET33 all-around on a E93?

Tire size: 265/30-19 preferred, or 255/30-19 if I must.
Suspension: Stock non-sport, no camber plates, but might may lower in the future (e.g. just springs)
Alignment: I'm assuming I would knock out the strut tower alignment pins and max out negative camber in the front (how much would that give me?)
Fender rolling: mild - i.e. don't want to pull / warp / deform the fenders

Is this possible?

As far as i know e92 and e93 have the same fender space front and back. 19x9.5 et33 rears will fit fine, but i have no idea how you will manage to fit the fronts. I think there are a few members running 9's in the front, but i haven’t seen any 9.5''s yet. The only hope would be with a stiff enough coilover setup and some major tire stretch/neg camber, but even that would have to be test fitted due to a high probability of rubbing. What would freak me out the most would be damaging the e92/93's plastic front fenders if the rims were to impact them hard enough. I don’t know how you could modify these fenders, since they are plastic ,unlike the e90s.

ClayMan · 02-04-2010, 01:34 AM

What about 19x9.5" ET40 all-around? That's the equivalent of 19x9" ET34 or so, in terms of outside fender clearance.

remmib · 02-04-2010, 01:23 PM

Quote:

Originally Posted by ClayMan

What about 19x9.5" ET40 all-around? That's the equivalent of 19x9" ET34 or so, in terms of outside fender clearance.

19x9.5 ET40 will hit the struts in the front. I think I've seen pics of an e90 with 19x9.5 ET33 in the front.

mycoupe · 02-04-2010, 01:37 PM

OT, but are E92 M's front fenders plastic as well?

remmib · 02-04-2010, 01:49 PM

Link to the thread of the e90 with 19x9.5 ET33 in the front.

http://www.e90post.com/forums/showthread.php?t=347791

ClayMan · 02-04-2010, 05:11 PM

Quote:

Originally Posted by mycoupe

OT, but are E92 M's front fenders plastic as well?

As far as I know, yes they are. They are lighter and more durable, it only makes sense...

01-31-2010, 11:13 PM	#1
ClayMan Second Lieutenant 21 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	How much work to fit 19x9.5" ET33 all-around on E92/E93? E92 and E93 are the same right? How much work would it be to fit 19x9.5" ET33 all-around on a E93? Tire size: 265/30-19 preferred, or 255/30-19 if I must. Suspension: Stock non-sport, no camber plates, but might may lower in the future (e.g. just springs) Fender rolling: mild - i.e. don't want to pull / warp / deform the fenders Alignment: How much negative camber do I need? I'm assuming I would knock out the strut tower alignment pins and max out negative camber in the front (I'm guessing this won't give me much more than -1.0º, is that right?) Is this possible? Any thoughts / experiences to chime in? Last edited by ClayMan; 02-01-2010 at 12:21 AM..
	Appreciate 0 Tweet Quote

02-04-2010, 01:34 AM	#3
ClayMan Second Lieutenant 21 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	What about 19x9.5" ET40 all-around? That's the equivalent of 19x9" ET34 or so, in terms of outside fender clearance.
	Appreciate 0 Quote

02-04-2010, 01:37 PM	#5
mycoupe Banned 62 Rep 1,495 Posts Drives: 07 335i coupe 6spd Join Date: Dec 2009 Location: cincinnati, Ohio iTrader: (5)	OT, but are E92 M's front fenders plastic as well?
	Appreciate 0 Quote

02-04-2010, 01:49 PM	#6
remmib General 1596 Rep 29,217 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	Link to the thread of the e90 with 19x9.5 ET33 in the front. http://www.e90post.com/forums/showthread.php?t=347791 __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote