|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Uneven tyre wear
|
|
02-05-2010, 03:18 PM | #1 |
Private
13
Rep 88
Posts |
Uneven tyre wear
Hi all,
I'm due to replace all four tyres next month but have noticed the last outer inch of the front offside tryre has really worn & is bordering on being bald. Is this a tracking issue or just down to the tyre itself? I think the pressures are correct although tbh I haven't checked them for a few weeks. All the other tyres appear to have worn evenly.
__________________
Car Ownership History Red Ford Sierra, Blue Ford Orion Giha, Burgundy Ford Fiesta, Black Vauxhall Corsa SRI, Blue Rover 216 SI , Silver Volvo S40 T4 Saloon, Blue Renault Clio RXE, Black Renault Clio 172 Sport, Red VW Polo, Peugeot Expert & BMW 335i MSport Coupe
|
02-05-2010, 04:56 PM | #3 |
Private First Class
21
Rep 110
Posts |
Likely to just need tracking doing. I've just noticed the same with one of my front. Most of the tyre had about 5mm of tread, but the edge was actually down to canvas.
Got the tyre replaced and had the tracking done - hopefully will have sorted it.
__________________
2008 E92 330d M-Sport, Sapphire Black, 19" 225M's
|
Appreciate
0
|
02-05-2010, 06:58 PM | #4 |
Colonel
75
Rep 2,937
Posts |
Common problem on E90/1. Outer edges wear first on the fronts especially with runflats. Get the car four wheel aligned when you replace the tyres on a Hunter system, not a cheap front wheel tracking job. Low tyre pressures also speed up the balding outer edges, so keep an eye on them monthly. I run mine 0.2 bar above recommended.
|
Appreciate
0
|
Bookmarks |
|
|