DEI Shock Sensor Install

SnEeKy4LiFe · 02-02-2007, 01:51 PM

where the DIY for this... I want this on my car... Does it give off a warning or it just set the alarm off right away.

ironic · 02-02-2007, 08:06 PM

Quote:

Originally Posted by 335DOG

I got the shock sensor to work today. The problem you’re having is because you are trying to connect the green wire to the motion sensor. I tried both the blue and green and only the blue wire sets the alarm off. I guess the signal from the green is different from the blue. The shock sensor works very well in the headline. Also I put a diode on the green wire from the shock sensor and another diode on the motion sensor to stop the current back flow from each other.

Oh shit, i'mma try that right now, thanks!

ironic · 02-02-2007, 08:15 PM

IT WORKED!! can you tell me which direction you had the diode's set up too? DIY after I work out the diodes

ironic · 02-02-2007, 10:15 PM

http://www.e90post.com/forums/showth...719#post675719

335DOG · 02-02-2007, 10:57 PM

I put the diode on the motion sensor but there is a problem with that. Pin number 7 is an input out source therefore you cannot put the diode on that line. You just need to put one on the blue wire of the shock sensor. Cathode is on the shock sensor side so the anode is hooked up to the motion sensor harness.

02-02-2007, 01:51 PM	#23
SnEeKy4LiFe Second Lieutenant 16 Rep 229 Posts Drives: E90 Join Date: Jan 2006 Location: Hawaii iTrader: (4)	where the DIY for this... I want this on my car... Does it give off a warning or it just set the alarm off right away. __________________ Sneeky4life '06 330i, SG, ZSP, ZPP, Blackline Taillight, 20" Vossen CV3, M3 front and rear..
	Appreciate 0 Quote

02-02-2007, 08:15 PM	#25
ironic Major General 271 Rep 8,338 Posts Drives: Jet Black 335i Join Date: Dec 2006 Location: San Francisco, Ca iTrader: (22)	IT WORKED!! can you tell me which direction you had the diode's set up too? DIY after I work out the diodes __________________ Widebody 335i Project Car BUILD \| PHOTOSHOOT
	Appreciate 0 Quote

02-02-2007, 10:15 PM	#26
ironic Major General 271 Rep 8,338 Posts Drives: Jet Black 335i Join Date: Dec 2006 Location: San Francisco, Ca iTrader: (22)	http://www.e90post.com/forums/showth...719#post675719 __________________ Widebody 335i Project Car BUILD \| PHOTOSHOOT
	Appreciate 0 Quote

02-02-2007, 10:57 PM	#27
335DOG Private 1 Rep 69 Posts Drives: E90 335i Join Date: Jan 2007 Location: Texas iTrader: (1)	I put the diode on the motion sensor but there is a problem with that. Pin number 7 is an input out source therefore you cannot put the diode on that line. You just need to put one on the blue wire of the shock sensor. Cathode is on the shock sensor side so the anode is hooked up to the motion sensor harness.
	Appreciate 0 Quote