|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Shop quote for replacing turbos!
|
|
04-02-2010, 12:07 AM | #1 |
Uhcoug2011
39
Rep 757
Posts |
Shop quote for replacing turbos!
So, I called up a couple of shops here in Houston to see who was capable of replacing the stock turbos with other (less mileage) stock turbos...
I contacted a shop that seems pretty knowledgeable that also has a GT1 and they are quoting me 15 mechanical hours ($1573 in labor) for replacing the turbos on the 335.... he also said there are parts that need to be replaced when replacing the turbos, is this true? What parts would need to be replaced? Is this a decent deal? The dealer was quoting me $2800 to "recalibrate" the waste gates so I figure if I am going to pay the labor I'd might as well replace the turbos with some with much less mileage. $1600 labor $200 parts + my turbos.... good deal?
__________________
Sparkling Graphite E90 / JUICEBOX 3 / BMS DUAL CONE FILTERS
|
04-02-2010, 12:17 AM | #2 |
2108
Rep 43,350
Posts |
The parts are the two wastegate arms I'd assume and the labor at $100 isn't cheap by any means. It's an entry level luxo performance car, you don't have to take it to a Porche shop to get the job done.
|
Appreciate
0
|
04-02-2010, 12:20 AM | #3 |
Major General
384
Rep 8,688
Posts
Drives: 06 330i
Join Date: Dec 2008
Location: The Promise Land
|
do it yourself!!! get an engine hoist
(if you are capable) |
Appreciate
0
|
04-02-2010, 12:41 AM | #4 | |
Brigadier General
135
Rep 3,052
Posts |
Quote:
|
|
Appreciate
0
|
04-02-2010, 12:41 AM | #5 |
Brigadier General
199
Rep 4,646
Posts |
just to let op knows, turbo gaskets and manifold gaskets are the ones that needs to be replaced...
#3 in this link http://bmwfans.info/parts/catalog/E9...tic_converter/ and also #3 in this link http://bmwfans.info/parts/catalog/E9...turbo_charger/ i would much rather try to get the ones with less miles if possible within your budget of course... GL! i don't know what those $200 parts are but if those are waste gate rods to actuator, they might charge you extra labour for it. well, at least that's what my local dealer quoted anyways...
__________________
SGE92TT......................... 12.331 Sec @ 117.89 Mph............................POWERED BY
l BMS DCI l HELIX IC l FORGE DVs l RR OCC & CP & SCOOPS l AR 3" DPs l AE QUADs l BLISTEIN PSS10 l P3 VENT GUAGE l VISHNU PROCEDE V5 AUTOTUNE l Lots of Window Stickers |
Appreciate
0
|
04-02-2010, 02:53 AM | #8 |
Uhcoug2011
39
Rep 757
Posts |
Thank you very much guys! I really appreciate all the responses...
SFValley... You are no stranger to this car, you know how long its taken to come this far so I am just not comfortable putting upgraded turbos on yet..However I figure if I am getting down there to fix the wastegates I'd might as well put a set of turbos that only have 5k miles as opposed to mine with 74k!
__________________
Sparkling Graphite E90 / JUICEBOX 3 / BMS DUAL CONE FILTERS
|
Appreciate
0
|
04-08-2010, 10:35 AM | #10 |
General
290
Rep 28,154
Posts |
|
Appreciate
0
|
04-08-2010, 10:41 AM | #11 |
First Lieutenant
22
Rep 306
Posts |
If i remember correct , Rob Beck stated that it's not nessecary to lift or lower the engine or to loose any motor mounts. It will be alot more easy , but it can be done without.
|
Appreciate
0
|
Bookmarks |
|
|