Can I fix this?

samwoo2go · 05-05-2010, 03:44 AM

curb rash on the areo lip. Is this too deep to fix myself? I am not trying to fix it perfect, because I prob can't but what can I do. I am not guna take it to a paint shop, no $ for that. Those yellow spots are not rub offs, they are either primer or the bumper itself. These pics are taken after I used ScratchX already.

flash

no flash

328i · 05-05-2010, 10:04 AM

That would definitely require a repaint to fix, not much you can do to diy as the plastic looks gouged deeply. Cheapest fix would be to pick up some carbon fiber or painted splitters, that would cover that all up.

fnckr · 05-05-2010, 10:21 AM

Obviously a body shop will give you the best results. However, you'll have to paint the driver's side too inorder to match, since you'll be covering up rock chips and such. You don't want one side perfect and not the other.

Or, do as 328i said and just cover it with new carbon or painted splitters.

Or, go to expresspaint.com, buy the proper color and spray it yourself. You'll get enough paint for both splitters. And since there's a seam right there and it's at the bottom of the car it won't look to terrible. You can mask at the seam and not worry about color blending, etc. I did this to a car I had a looooooong time ago. The results were pretty good for an out of site area. I wouldn't do my hood, but for that down low it's going to be fine.

Make sure to prep properly by sanding. Apply light, but full coats, and then clear coat. No one but you will ever know.

328i · 05-05-2010, 10:55 AM

If you do go the painting route, make sure you sand and level it with appropriate body filler before hand.

crazytaiwanese · 05-05-2010, 12:22 PM

if the job ends up costing you as much as getting a replacement aero lip, you may as well purchase a new one and sell the old one.

samwoo2go · 05-05-2010, 11:46 PM

I think I am going to go with the sand and repaint myself route because I really like the aero lip look by itself. some questions

So I should mask off the car and paint the entire front lip? or just the 2 splitters portion?
How do I properly prep for paint? is there a write up somewhere besides the expresspaint 1s?
Is 1 aerosol can of paint and 1 aerosol can of clear coat from expresspaint enough for the lip?

I am scared lol...

05-05-2010, 03:44 AM	#1
samwoo2go Banned 476 Rep 779 Posts Drives: E92 335i Join Date: Sep 2007 Location: SoCal iTrader: (12)	Can I fix this? curb rash on the areo lip. Is this too deep to fix myself? I am not trying to fix it perfect, because I prob can't but what can I do. I am not guna take it to a paint shop, no $ for that. Those yellow spots are not rub offs, they are either primer or the bumper itself. These pics are taken after I used ScratchX already. flash no flash
	Appreciate 0 Tweet Quote

05-05-2010, 10:04 AM	#2
328i Colonel 153 Rep 2,934 Posts Drives: E46 ///M Join Date: Jan 2007 Location: central NJ iTrader: (15)	That would definitely require a repaint to fix, not much you can do to diy as the plastic looks gouged deeply. Cheapest fix would be to pick up some carbon fiber or painted splitters, that would cover that all up. __________________
	Appreciate 0 Quote

05-05-2010, 10:21 AM	#3
fnckr Second Lieutenant 6 Rep 247 Posts Drives: 2006 330i 6mt Join Date: Feb 2009 Location: Boonton Twp, NJ iTrader: (0)	Obviously a body shop will give you the best results. However, you'll have to paint the driver's side too inorder to match, since you'll be covering up rock chips and such. You don't want one side perfect and not the other. Or, do as 328i said and just cover it with new carbon or painted splitters. Or, go to expresspaint.com, buy the proper color and spray it yourself. You'll get enough paint for both splitters. And since there's a seam right there and it's at the bottom of the car it won't look to terrible. You can mask at the seam and not worry about color blending, etc. I did this to a car I had a looooooong time ago. The results were pretty good for an out of site area. I wouldn't do my hood, but for that down low it's going to be fine. Make sure to prep properly by sanding. Apply light, but full coats, and then clear coat. No one but you will ever know. __________________ It's Funseeker! I'm all about the good times!
	Appreciate 0 Quote

05-05-2010, 10:55 AM	#4
328i Colonel 153 Rep 2,934 Posts Drives: E46 ///M Join Date: Jan 2007 Location: central NJ iTrader: (15)	If you do go the painting route, make sure you sand and level it with appropriate body filler before hand. __________________
	Appreciate 0 Quote

05-05-2010, 12:22 PM	#5
crazytaiwanese Lieutenant 25 Rep 407 Posts Drives: 335i Join Date: Nov 2009 Location: USA iTrader: (2)	if the job ends up costing you as much as getting a replacement aero lip, you may as well purchase a new one and sell the old one.
	Appreciate 0 Quote

05-05-2010, 11:46 PM	#6
samwoo2go Banned 476 Rep 779 Posts Drives: E92 335i Join Date: Sep 2007 Location: SoCal iTrader: (12)	I think I am going to go with the sand and repaint myself route because I really like the aero lip look by itself. some questions So I should mask off the car and paint the entire front lip? or just the 2 splitters portion? How do I properly prep for paint? is there a write up somewhere besides the expresspaint 1s? Is 1 aerosol can of paint and 1 aerosol can of clear coat from expresspaint enough for the lip? I am scared lol...
	Appreciate 0 Quote