[import36]

i'm trying to ensure that i have the right channels being logged...because when i view the datalog i captured the other day...i appear to be missing some(ex. debug 6).

when i open up the Procede software and go to Datalogging>Channel Setup..i have the following showing as logged channels:

- Throttle
- CAN DBW throttle
- Debug Word 4
- Boost Control DC
- Boost Control Set Point
- Debug Word 3
- CAN DME Codes
- Ignition Output deg
- Inlet Air Temp
- Debug Word 2

per the instruction on the Vishnu site...i did drop the latest datalogging setup and channel config files in the Procede folder...and the above is what i have. can someone advise what might be wrong?

[OpenFlash]

There is no right or wrong channels to log. You can only log 10 channel at a time and you have 60 or so to choose from. Just select the 10 that you are interested in. Sometimes I change the default list around to what I find interesting which depends on what new features that we just added.

[import36]

wow...thanks for the quick response Shiv! i'm in the beginner stage of learning to read/manipulate the data using the software so that it makes sense. i'll keep digging through some of the older threads so i can determine what all the debug references are.