Tire Rotation

munu · 06-27-2010, 07:16 PM

Hi
I have 335i e90 with sports so I have different size tires on front and back. 6-7 month back I switched on non-RFT (Goodyear Assymetric) tires.

Are we suppose to rotate tires? I mean switching front left with front right and same for back. I have not done that for my previous set of tires.

Thanks

Tom K. · 06-27-2010, 07:20 PM

No. And since you can't rotate front to back, the usual method is to replace the two tires which wear out first - usually the rears on a rwd BMW.

Tom

jeremicium · 06-27-2010, 07:25 PM

I think the only way it will be of any benefit to the life of the tire is if you remove the tires from the rims and switch the inside edge to become the outside edge...I think the primary wear issue is on the inside edge of the rear from the negative camber...that is assuming the car is aligned properly and tire pressure is kept where it should be. I intend to do that at about 7,500 miles with my new non-RFTs...in hopes of getting an extra 6 months-year out of the tires. My RFTs in the rear were dead at 15,000 miles...but only on the inside edge.

dreamingat30fps · 06-27-2010, 07:27 PM

Quote:

Originally Posted by jeremicium

I think the only way it will be of any benefit to the life of the tire is if you remove the tires from the rims and switch the inside edge to become the outside edge...I think the primary wear issue is on the inside edge of the rear from the negative camber...that is assuming the car is aligned properly and tire pressure is kept where it should be. I intend to do that at about 7,500 miles with my new non-RFTs...in hopes of getting an extra 6 months-year out of the tires. My RFTs in the rear were dead at 15,000 miles...but only on the inside edge.

+1

chromisdesigns · 06-27-2010, 07:34 PM

WIth staggered-size, assymetric tires, you can only rotate them by dismounting and remounting, and that only if they are not also directional. If they are directional AND assymetric, you are stuck with them wearing on the inside edges early.

2 3pair · 06-27-2010, 07:45 PM

But if they're directional and symmetric, you can still swap them, right? I just replaced some Goodyear GS-D3s and they were more worn on the inside as expected. It makes sense that you could get more life out of the tire by swapping them at least once during the life of the tire. Should only cost about $50 to have them remounted on opposite sides.

jopa489 · 06-27-2010, 07:48 PM

Quote:

Originally Posted by 2 3pair

But if they're directional and symmetric, you can still swap them, right?

Absolutely.

The stock RE050A's are asymmetric and directional, so don't rotate them.

Alexander · 06-27-2010, 08:14 PM

The only way to be able to rotate your tires is to run a square setup with same tire sizes all around, but I'd just buy two new rears, and then later down the road two new fronts.

Thunder Dump · 06-29-2010, 07:23 AM

Quote:

Originally Posted by jopa489

Absolutely.

The stock RE050A's are asymmetric and directional, so don't rotate them.

This is incorrect. The stock tires are asymmetrical but they are NOT directional, so you can (if you choose) rotate them side to side on the same axle). The sidewall clearly indicates which side needs to be mounted facing out (asymmetrical) but there is no rotation arrow (directional) which means they can rotate in either direction.

VTECaddict · 06-29-2010, 01:42 PM

Quote:

Originally Posted by Thunder Dump

This is incorrect. The stock tires are asymmetrical but they are NOT directional, so you can (if you choose) rotate them side to side on the same axle). The sidewall clearly indicates which side needs to be mounted facing out (asymmetrical) but there is no rotation arrow (directional) which means they can rotate in either direction.

+1.

Asymmetric = there is an inside and outside. Directional = they are designed to rotate one direction.

NON-directional asymmetric or symmetric tires can be rotated left and right (and front to back if front and rear sizes are the same).

Directional tires can only be rotated front to back IF the front and rear sizes are the same. If front and rear sizes are different, then no rotation is possible without dismounting the tires from the wheels and flipping them around.

orangedawg · 06-29-2010, 01:55 PM

A somewhat related question: I've got a 328xi. I was planning on getting 162's (I have the stock 16" rims now with same tire size all around) with rim widths of 8" and 8.5" (like they come when you buy stock: staggered). Now, if I put the same tire tire on all 4 rims (like 235 or so), can I rotate these front to rear (assuming directional tires on them)? I know the rim widths are .5" different, but with same tire size on them, would I have any issues? Thanks!

sickem · 06-29-2010, 01:57 PM

[QUOTE=VTECaddict;7581838]Directional = they are designed to rotate one direction.QUOTE]

so before you go in reverse, do you have to swap the front two wheels around? J/K.

06-27-2010, 07:16 PM	#1
munu First Lieutenant 54 Rep 307 Posts Drives: 2014 F30 Msports Join Date: Jul 2008 Location: Orlando, FL iTrader: (0)	Tire Rotation Hi I have 335i e90 with sports so I have different size tires on front and back. 6-7 month back I switched on non-RFT (Goodyear Assymetric) tires. Are we suppose to rotate tires? I mean switching front left with front right and same for back. I have not done that for my previous set of tires. Thanks
	Appreciate 0 Tweet Quote

06-27-2010, 07:20 PM	#2
Tom K. Major General 125 Rep 5,626 Posts Drives: '07 328iT, '13 Boxster Join Date: Mar 2008 Location: Maryland iTrader: (0)	No. And since you can't rotate front to back, the usual method is to replace the two tires which wear out first - usually the rears on a rwd BMW. Tom
	Appreciate 0 Quote

06-27-2010, 07:25 PM	#3
jeremicium Major 173 Rep 1,178 Posts Drives: 2011 E92 328i Join Date: May 2009 Location: Tacoma, Wa. USA iTrader: (0) Garage List 2011 BMW 328i [0.00] 2009 Porsche Cayman S [0.00] 2016 BMW M2 [0.00] 2001 Honda S2000 [0.00]	I think the only way it will be of any benefit to the life of the tire is if you remove the tires from the rims and switch the inside edge to become the outside edge...I think the primary wear issue is on the inside edge of the rear from the negative camber...that is assuming the car is aligned properly and tire pressure is kept where it should be. I intend to do that at about 7,500 miles with my new non-RFTs...in hopes of getting an extra 6 months-year out of the tires. My RFTs in the rear were dead at 15,000 miles...but only on the inside edge.
	Appreciate 0 Quote

06-27-2010, 07:34 PM	#5
chromisdesigns Lieutenant Colonel 45 Rep 1,753 Posts Drives: 2008 BMW 335i sedan Join Date: Jan 2010 Location: San Francisco iTrader: (0)	WIth staggered-size, assymetric tires, you can only rotate them by dismounting and remounting, and that only if they are not also directional. If they are directional AND assymetric, you are stuck with them wearing on the inside edges early.
	Appreciate 0 Quote

06-27-2010, 07:45 PM	#6
2 3pair Second Lieutenant 4 Rep 284 Posts Drives: as often as possible Join Date: Jun 2010 Location: Memphis iTrader: (2)	But if they're directional and symmetric, you can still swap them, right? I just replaced some Goodyear GS-D3s and they were more worn on the inside as expected. It makes sense that you could get more life out of the tire by swapping them at least once during the life of the tire. Should only cost about $50 to have them remounted on opposite sides. __________________
	Appreciate 0 Quote

06-27-2010, 08:14 PM	#8
Alexander Mad tyte EuR0 style boooi <--- Joke 222 Rep 2,472 Posts Drives: E30, E85, MKVI Join Date: Nov 2009 Location: Deal's Gap iTrader: (0)	The only way to be able to rotate your tires is to run a square setup with same tire sizes all around, but I'd just buy two new rears, and then later down the road two new fronts.
	Appreciate 0 Quote

06-29-2010, 01:55 PM	#11
orangedawg Lieutenant 33 Rep 405 Posts Drives: 328xi Join Date: Mar 2010 Location: WA iTrader: (0)	A somewhat related question: I've got a 328xi. I was planning on getting 162's (I have the stock 16" rims now with same tire size all around) with rim widths of 8" and 8.5" (like they come when you buy stock: staggered). Now, if I put the same tire tire on all 4 rims (like 235 or so), can I rotate these front to rear (assuming directional tires on them)? I know the rim widths are .5" different, but with same tire size on them, would I have any issues? Thanks!
	Appreciate 0 Quote

06-29-2010, 01:57 PM	#12
sickem Freude am fahren 72 Rep 1,968 Posts Drives: E90 N54 Join Date: Mar 2010 Location: Doylestown, PA iTrader: (4) Garage List 2008 BMW 335i E90 [6.50]	[QUOTE=VTECaddict;7581838]Directional = they are designed to rotate one direction.QUOTE] so before you go in reverse, do you have to swap the front two wheels around? J/K. __________________ Cobb E40 PROtune by Jake@PTF/RR catless DPs/aFe DCI/ETS 5" FMIC/ER CP/Forge DVs/Alpina B3 TCU flash/BMW Perf. Exhaust./BMW Performance Style 313s/M-Tech Rear
	Appreciate 0 Quote