[AltecBX]

Originally Posted by shifterboy45

when software is released for revision there is a modular structure to the whole package.

the UI for diagnostics and programming are the containers ie ISTA/P or ISTA/D with versions like 2.18 and up --

since the overall program is used with numerous cars, each of the selectable configurations will deploy a set package(s) of software for the specific car.

now each one of these packages are referred to as integration levels. those numbers are usually preceded by E** (**60-65 89x) or F** (01 001 010)
these are platform specifc and highly configurable based on equipment

so if you were programmed with system version 2.20 - that would mean your integration level is most likely 2.38 at least and I-Level E89x-10-06.500 or so.

New ISTA 2.21 is forthcoming

Ok, so if I get this correctly, it means that I'm upgraded to v38 as dmurray suggested. Since I was programmed with system version 2.20 I have 2.38(the 38 meaning for v.38)?

I took a video by holding down the little stick on the dash to go through some menus. I did so by holding it down for 10 seconds. Will this help tell me what I have?

01.00
FGSTNR
A008739

01.01
K-ZAHL W / T
78827 / 78028

-In between click
01.02
BMWTNR
4601?03001:
-In between click

01.02
BMWTNR
000009187368

01.03
COD DIA
0008h 08D0H

-In between click
01.04
KI HSTLDATUM
46.46.4601
-In between click

01.04
KI HSTLDATUM
25.06.2007 <--- I believe this is my built date

-In between click
01.05
HW AEI
4601h 4601h
-In between click

01.05
HW AEI
0C0Eh 000Dh

01.06
SW
A3.45.C0

-In between click
01.07
KODIERDATEN
46.01.FC.03
-In between click

01.07
KODIERDATEN
08.11.30.18

01.08
CAN
00 23 107


VIDEO
[u2b]<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/6p2TdUEM3Bg&amp;hl=en_US&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/6p2TdUEM3Bg&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>[/u2b]

[dmurray14]

Originally Posted by AltecBX

Ok, so if I get this correctly, it means that I'm upgraded to v38 as dmurray suggested. Since I was programmed with system version 2.20 I have 2.38(the 38 meaning for v.38)?

I took a video by holding down the little stick on the dash to go through some menus. I did so by holding it down for 10 seconds. Will this help tell me what I have?

01.00
FGSTNR
A008739

01.01
K-ZAHL W / T
78827 / 78028

-In between click
01.02
BMWTNR
4601?03001:
-In between click

01.02
BMWTNR
000009187368

01.03
COD DIA
0008h 08D0H

-In between click
01.04
KI HSTLDATUM
46.46.4601
-In between click

01.04
KI HSTLDATUM
25.06.2007 <--- I believe this is my built date

-In between click
01.05
HW AEI
4601h 4601h
-In between click

01.05
HW AEI
0C0Eh 000Dh

01.06
SW
A3.45.C0

-In between click
01.07
KODIERDATEN
46.01.FC.03
-In between click

01.07
KODIERDATEN
08.11.30.18

01.08
CAN
00 23 107


VIDEO
[u2b]<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/6p2TdUEM3Bg&amp;hl=en_US&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/6p2TdUEM3Bg&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>[/u2b]

Unfortunately, nothing in there will tell your your i-level