Minneapolis Dyno Day!!!!

BSME90 · 08-01-2010, 10:28 PM

Quote:

Originally Posted by ajvee

I've decided to scrap this crappy exhaust and put on my stock one for now. The design and fit are just too crappy for me to dealt with. I've learned a good lesson about quality parts.

You can't return it and get a refund?

prelude2perfect · 08-01-2010, 11:03 PM

Well sorry I missed this but I did have a good reason; I'm now a father! Her ride home from the hospital will be in the 335i.

So did anyone else dyno? Numbers?

IRL-MN · 08-01-2010, 11:19 PM

Quote:

Originally Posted by ajvee

Great meeting and chatting with you guys!

MnM3 - Thank you so much letting me drive your M3. The car is a beauty.

I've decided to scrap this crappy exhaust and put on my stock one for now. The design and fit are just too crappy for me to dealt with. I've learned a good lesson about quality parts.

lol, does this mean an M3 is on the horizon Anvar?!

IRL-MN · 08-01-2010, 11:19 PM

Quote:

Originally Posted by prelude2perfect

Well sorry I missed this but I did have a good reason; I'm now a father! Her ride home from the hospital will be in the 335i.

So did anyone else dyno? Numbers?

Congrats man, hope everybody is doing well.

BSME90 · 08-02-2010, 01:44 AM

Quote:

Originally Posted by IRL-MN

lol, does this mean an M3 is on the horizon Anvar?!

Stop changing his mind!!!

ajvee · 08-02-2010, 11:06 AM

Quote:

Originally Posted by IRL-MN

lol, does this mean an M3 is on the horizon Anvar?!

In all honesty, the exhaust that I don't think I will be happy with that exhaust. The fact that it had a hole is going to bother me and honestly I don't like the design. It has no reasonators so it most likely will drone during cruising speed, which will drive me crazy!

I am thinking about going for a new setup with reasonators and stuff. I will keep you guys posted.

ajvee · 08-02-2010, 11:07 AM

Quote:

Originally Posted by BSME90

Stop changing his mind!!!

Have a reputation to keep Martin!

M3x2 · 08-02-2010, 11:41 AM

i agree - having resonators is a good idea.

ajvee · 08-02-2010, 11:47 AM

Quote:

Originally Posted by M3x2

i agree - having resonators is a good idea.

Hey Art, hope you had a good rest of the weekend. I am forecasting this drone issue, because while driving without an exhaust, I noticed a really annoying drone at cruising speeds. While it might be reduced with the exhaust, I can't see it going away completely.

Also, since the RR is a single midpipe, I cannot use the stock support brace which is for two midpipes. The hole is actually right at the spot where the support brace would have been for the stock setup, so I am assuming that the hole resulted from a stress fracture. So even if I welded it, if I ran the exhaust without a custom support bracket, I can imagine it cracking at the same spot again.

ajvee · 08-02-2010, 04:04 PM

Quote:

Originally Posted by BSME90

Stop changing his mind!!!

Can you let me know the exhaust shop that did your muffler delete? I am thinking about salvaging something from this POS exhaust.

BSME90 · 08-02-2010, 08:30 PM

Quote:

Originally Posted by ajvee

Can you let me know the exhaust shop that did your muffler delete? I am thinking about salvaging something from this POS exhaust.

I went to AutoMax in Apple Valley. The one that did my exhaust is the owner and he did an awesome job. I forgot his name, but I know I have his business card somewhere in my room. Yeah, let him see that exhaust and he can probably fix it!

M3x2 · 08-02-2010, 09:20 PM

if not where Martin suggested....

A lot of Audi folk have used Chad. I've never used him but know of many who have and uniformly they heap praise on his skills and pricing.

He has made several/many custom design exhausts for people, and I think you should touch base with him and tell him your situation..... obv. you arent looking for a *full custom* exhaust, but if anyone can make the one you have work, it may be him:

Chad Simonson
Bee Line Service
27540 Forest Blvd.
Wyoming, MN 55092
(651) 462-2650

BrianMN · 08-03-2010, 12:06 AM

Hey Guys, Thought I'd give an update.

After stripping my car down until 5am Friday Night, Shiv and I weren't able to figure out what crazy problem I was having with my wastegates/throttle blade oscillation. Boost would spike to 22psi, resulting in the throttle blade fully closing, to then building more boost and continue with this pattern. Bummer I couldnt' dyno.

Sunday I took the tune out and the car seemed to act kinda similar, but not neary as drastic. BT Datalogs showed the TB still had some oscillation, but within a reasonable/expected amount.

So Monday I was planning on meeting up with Nick.GSXR-750 and swapping tune boxes. That was the last resort before pulling the turbos off... I figured my odds of a defective tune ecu (1 in thousands) was better than having a stuck wastegate (Never heard of)

I re-installed my tune, so Nick and I could just swap boxes. Upon installing and driving, the car was behaving perfectly. After a few miles of datalogging, my relief was confirmed. I am still dumbfouned...like it was all a bad acid trip. The car is perfect now...extremely fast, no boost spikes, just all-around healthy with no oscillations of boost or throttle blade position.

So, I guess I'll have to do a solo dyno run...perhaps with Anvar and his re-stocked exhaust.?

airwolf878 · 08-03-2010, 12:46 AM

Quote:

Originally Posted by BrianMN

Hey Guys, Thought I'd give an update.

After stripping my car down until 5am Friday Night, Shiv and I weren't able to figure out what crazy problem I was having with my wastegates/throttle blade oscillation. Boost would spike to 22psi, resulting in the throttle blade fully closing, to then building more boost and continue with this pattern. Bummer I couldnt' dyno.

Sunday I took the tune out and the car seemed to act kinda similar, but not neary as drastic. BT Datalogs showed the TB still had some oscillation, but within a reasonable/expected amount.

So Monday I was planning on meeting up with Nick.GSXR-750 and swapping tune boxes. That was the last resort before pulling the turbos off... I figured my odds of a defective tune ecu (1 in thousands) was better than having a stuck wastegate (Never heard of)

I re-installed my tune, so Nick and I could just swap boxes. Upon installing and driving, the car was behaving perfectly. After a few miles of datalogging, my relief was confirmed. I am still dumbfouned...like it was all a bad acid trip. The car is perfect now...extremely fast, no boost spikes, just all-around healthy with no oscillations of boost or throttle blade position.

So, I guess I'll have to do a solo dyno run...perhaps with Anvar and his re-stocked exhaust.?

Pretty crazy man. So are they gonna replace your procede? Glad to hear it wasn't something more serious!

ajvee · 08-03-2010, 03:03 PM

So Brian tried putting in my exhaust last night and though the hole is patched up, it wouldn't mate to the stock downpipes

Absolutely horrible fitment!

08-01-2010, 11:03 PM	#90
prelude2perfect Captain 63 Rep 621 Posts Drives: 2013 M5 and 2015 535i Join Date: Apr 2010 Location: Savannah, GA iTrader: (8)	Well sorry I missed this but I did have a good reason; I'm now a father! Her ride home from the hospital will be in the 335i. So did anyone else dyno? Numbers?
	Appreciate 0 Quote

08-02-2010, 11:41 AM	#96
M3x2 Private First Class 6 Rep 137 Posts Drives: '11 M3 Jerez Sedan Join Date: Jul 2010 Location: Edina, MN iTrader: (0)	i agree - having resonators is a good idea. __________________ '11 Jerez M3 sedan, MDCT, ZCP '99 Hellrot M3 vert, twin-screw SC, other goodies
	Appreciate 0 Quote

08-02-2010, 09:20 PM	#100
M3x2 Private First Class 6 Rep 137 Posts Drives: '11 M3 Jerez Sedan Join Date: Jul 2010 Location: Edina, MN iTrader: (0)	if not where Martin suggested.... A lot of Audi folk have used Chad. I've never used him but know of many who have and uniformly they heap praise on his skills and pricing. He has made several/many custom design exhausts for people, and I think you should touch base with him and tell him your situation..... obv. you arent looking for a full custom exhaust, but if anyone can make the one you have work, it may be him: Chad Simonson Bee Line Service 27540 Forest Blvd. Wyoming, MN 55092 (651) 462-2650 __________________ '11 Jerez M3 sedan, MDCT, ZCP '99 Hellrot M3 vert, twin-screw SC, other goodies
	Appreciate 0 Quote

08-03-2010, 12:06 AM	#101
BrianMN Banned 128 Rep 2,428 Posts Drives: 4 Door Family Sedan Join Date: Sep 2009 Location: Minneapolis iTrader: (7)	Hey Guys, Thought I'd give an update. After stripping my car down until 5am Friday Night, Shiv and I weren't able to figure out what crazy problem I was having with my wastegates/throttle blade oscillation. Boost would spike to 22psi, resulting in the throttle blade fully closing, to then building more boost and continue with this pattern. Bummer I couldnt' dyno. Sunday I took the tune out and the car seemed to act kinda similar, but not neary as drastic. BT Datalogs showed the TB still had some oscillation, but within a reasonable/expected amount. So Monday I was planning on meeting up with Nick.GSXR-750 and swapping tune boxes. That was the last resort before pulling the turbos off... I figured my odds of a defective tune ecu (1 in thousands) was better than having a stuck wastegate (Never heard of) I re-installed my tune, so Nick and I could just swap boxes. Upon installing and driving, the car was behaving perfectly. After a few miles of datalogging, my relief was confirmed. I am still dumbfouned...like it was all a bad acid trip. The car is perfect now...extremely fast, no boost spikes, just all-around healthy with no oscillations of boost or throttle blade position. So, I guess I'll have to do a solo dyno run...perhaps with Anvar and his re-stocked exhaust.?
	Appreciate 0 Quote

08-03-2010, 03:03 PM	#103
ajvee Major 131 Rep 1,451 Posts Drives: None Join Date: Sep 2009 Location: None iTrader: (13)	So Brian tried putting in my exhaust last night and though the hole is patched up, it wouldn't mate to the stock downpipes Absolutely horrible fitment!
	Appreciate 0 Quote