8mm Spacer Question

dbjb · 07-30-2010, 02:04 PM

Need a quick answer...

I currently have a 10mm spacer and need a little more clearance. Therefore, an 8mm should do the trick.

Onto the question...

Does the 8mm have an extended hub ring like the 10mm+ spacers or is it completely flat like the 5mm- spacers?

If you have an 8mm spacer, please answer WITH brand information.

Thanks in advance!

SV Concepts III · 07-30-2010, 03:50 PM

The H&R 8mm do have the lip, their 5mm and 3mm are flat.

dbjb · 07-30-2010, 06:04 PM

Quote:

Originally Posted by Nick@Jlevi SW

The H&R 8mm do have the lip, their 5mm and 3mm are flat.

Thanks for the reply. I just checked your website. 8mm isn't listed. Do you have them? If so, how much for a pair shipped to 95648?

The HACK · 07-30-2010, 06:15 PM

Quote:

Originally Posted by dsbj

Thanks for the reply. I just checked your website. 8mm isn't listed. Do you have them? If so, how much for a pair shipped to 95648?

I've got an extra set of 8mm H&R spacer, new in box (never installed). Shipped for $60?

I don't recall H&R 8mm spacers having hub centric lips though.

dbjb · 07-30-2010, 06:31 PM

That works. Can you first check on the hubcentric ring? pic wouldn't hurt either. I I want to use them on the rear but the hub isn't that thick at all. I have 10's right it rubs just a teeny bit.

Quote:

Originally Posted by The HACK

I've got an extra set of 8mm H&R spacer, new in box (never installed). Shipped for $60?

I don't recall H&R 8mm spacers having hub centric lips though.

dbjb · 07-30-2010, 06:33 PM

Ps... grammar sucks when using my droid and eating. Lol.

The HACK · 07-30-2010, 06:41 PM

I'll bring them to work next Monday for pics.

dbjb · 07-30-2010, 06:44 PM

In the mean time, can you pop the box open and check for the lip? More concerned about that than the pics.

Quote:

Originally Posted by The HACK

I'll bring them to work next Monday for pics.

The HACK · 07-30-2010, 07:08 PM

Quote:

Originally Posted by dsbj

In the mean time, can you pop the box open and check for the lip? More concerned about that than the pics.

I will do so when I get home. However, I have only ever seen one brand of 8mm spacer with hub lips and that's Rogue Engineering's spacer. And I believe they discontinued it because there's not enough material there to make any sort of lip with moderate strength to keep the hub centric lip feature and they had some problems with the lip cracking/splitting due to some improper installation.

If the hub centric lip is a must, I also have a set of Turner Motorsports 8mm spacers with hub extenders. The hub extenders were never used, but the 8mm spacers were fitted once to check clearance. I can sell you the H&R (never installed) plus the hub extenders together for $90. Also I think with 8mm spacers you'll need extended lug bolts or stud conversion.

dbjb · 07-30-2010, 07:39 PM

Thanks Hack. Excellent information. All things being equal, I would like some form of hub for my wheels. What I need to do is remove my rear wheel and measure how far the hub protudes past the rotor. If its at least 10mm then the 8mm spacers without lip will be fine. BTW, I already have +10mm lug bolts so no need for those.

I'll be home tomorrow afternoon at which point I'll check my rear hubs. As of now, I'm 99% going to buy your spacers.

dbjb · 08-01-2010, 12:28 AM

Confirmed. Hubs stick out about 12mm. Therefore, I'll take your 8mm spacers.

dbjb · 08-04-2010, 11:55 AM

Hack,

Can't send you a PM. No idea why. Anyways, send me your paypal information so I can buy those H&R 8mm spacers.

remmib · 08-04-2010, 05:36 PM

Quote:

Originally Posted by Nick@Jlevi SW

The H&R 8mm do have the lip, their 5mm and 3mm are flat.

I thought 10mm was the thinnest spacers with hubcentric lip.

dbjb · 08-04-2010, 10:52 PM

Quote:

Originally Posted by remmib

I thought 10mm was the thinnest spacers with hubcentric lip.

I don't know 100% either way as I have yet to see an 8m spacer.

The HACK · 08-04-2010, 11:02 PM

Quote:

Originally Posted by dsbj

Hack,

Can't send you a PM. No idea why. Anyways, send me your paypal information so I can buy those H&R 8mm spacers.

Sorry about that, I've been in and out of meetings the last two days.

Just double checked the box and the part number:

1075725 C

Turns out these are 5mm instead of 8mm. Sorry. The Turner spacers I have (used once) are the 8mm spacers.

dbjb · 08-04-2010, 11:12 PM

Quote:

Originally Posted by The HACK

Sorry about that, I've been in and out of meetings the last two days.

Just double checked the box and the part number:

1075725 C

Turns out these are 5mm instead of 8mm. Sorry. The Turner spacers I have (used once) are the 8mm spacers.

How much for the Turner spacers? With and without the extender?

PS, do you have PM ability turned off? I've never experienced being unable to send a PM,

The HACK · 08-05-2010, 04:12 PM

Quote:

Originally Posted by dsbj

How much for the Turner spacers? With and without the extender?

PS, do you have PM ability turned off? I've never experienced being unable to send a PM,

I have it turned off.

The turner spacers (with extension) can be yours for $60. I used it once though (sans the hub extenders).

FotiosF90M5 · 08-05-2010, 04:38 PM

turner motorsport doesnt make or offer an 8mm spacer. Ive searched everywhere as I really need a set. All I see is either a 5mm or a 10mm. If you have a set can you give me some more info please. thanks

The HACK · 08-05-2010, 05:00 PM

Huh. Don't know how I found this.

http://www.turnermotorsport.com/html..._ID=TWH9905003

It appears Turner does not list this as a "fit" for the E9X, however based on what I know there's no difference in design of the hub to require a different fitment between E46 and E9X.

Hedges · 09-02-2010, 10:48 PM

Quote:

Originally Posted by The HACK

Huh. Don't know how I found this.

http://www.turnermotorsport.com/html..._ID=TWH9905003

It appears Turner does not list this as a "fit" for the E9X, however based on what I know there's no difference in design of the hub to require a different fitment between E46 and E9X.

Would these fit on my 328i front? Did it fit on yours?

The HACK · 09-03-2010, 12:25 PM

Quote:

Originally Posted by Hedges

Would these fit on my 328i front? Did it fit on yours?

I still don't see how E9X front hub being SO different from 3 series front hub from the last 20 years that anything that would work for an E36 and later won't work for an E9X. I think Turner just failed to list the E9X applications, that's all.

I bought them for my MZ4 Coupe.

Hedges · 09-03-2010, 07:41 PM

Quote:

Originally Posted by The HACK

I still don't see how E9X front hub being SO different from 3 series front hub from the last 20 years that anything that would work for an E36 and later won't work for an E9X. I think Turner just failed to list the E9X applications, that's all.

I bought them for my MZ4 Coupe.

Did you end up selling those 8mm's with hub extenders + lugs? If not let me take it off you! I want to try it out.

07-30-2010, 02:04 PM	#1
dbjb I sweat pheromones 209 Rep 2,103 Posts Drives: e92 335i, retired SLK55 Join Date: Jul 2009 Location: NorCal iTrader: (25)	8mm Spacer Question Need a quick answer... I currently have a 10mm spacer and need a little more clearance. Therefore, an 8mm should do the trick. Onto the question... Does the 8mm have an extended hub ring like the 10mm+ spacers or is it completely flat like the 5mm- spacers? If you have an 8mm spacer, please answer WITH brand information. Thanks in advance!
	Appreciate 0 Tweet Quote

07-30-2010, 03:50 PM	#2
SV Concepts III Lieutenant General 381 Rep 16,968 Posts Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara iTrader: (13)	The H&R 8mm do have the lip, their 5mm and 3mm are flat.
	Appreciate 0 Quote

07-30-2010, 06:33 PM	#6
dbjb I sweat pheromones 209 Rep 2,103 Posts Drives: e92 335i, retired SLK55 Join Date: Jul 2009 Location: NorCal iTrader: (25)	Ps... grammar sucks when using my droid and eating. Lol.
	Appreciate 0 Quote

07-30-2010, 06:41 PM	#7
The HACK Midlife Crises Racing Silent but Deadly Class 1832 Rep 5,337 Posts Drives: 2006 MZ4C, 2021 Tesla Model 3 Join Date: Oct 2007 Location: Welcome to Jamaica have a nice day iTrader: (1)	I'll bring them to work next Monday for pics.
	Appreciate 0 Quote

07-30-2010, 07:39 PM	#10
dbjb I sweat pheromones 209 Rep 2,103 Posts Drives: e92 335i, retired SLK55 Join Date: Jul 2009 Location: NorCal iTrader: (25)	Thanks Hack. Excellent information. All things being equal, I would like some form of hub for my wheels. What I need to do is remove my rear wheel and measure how far the hub protudes past the rotor. If its at least 10mm then the 8mm spacers without lip will be fine. BTW, I already have +10mm lug bolts so no need for those. I'll be home tomorrow afternoon at which point I'll check my rear hubs. As of now, I'm 99% going to buy your spacers.
	Appreciate 0 Quote

08-01-2010, 12:28 AM	#11
dbjb I sweat pheromones 209 Rep 2,103 Posts Drives: e92 335i, retired SLK55 Join Date: Jul 2009 Location: NorCal iTrader: (25)	Confirmed. Hubs stick out about 12mm. Therefore, I'll take your 8mm spacers.
	Appreciate 0 Quote

08-04-2010, 11:55 AM	#12
dbjb I sweat pheromones 209 Rep 2,103 Posts Drives: e92 335i, retired SLK55 Join Date: Jul 2009 Location: NorCal iTrader: (25)	Hack, Can't send you a PM. No idea why. Anyways, send me your paypal information so I can buy those H&R 8mm spacers.
	Appreciate 0 Quote

08-05-2010, 04:38 PM	#18
FotiosF90M5 ///M Specialist South Shore BMW 801 Rep 7,109 Posts Drives: 2021 M5 Comp BHG/Silverstone Join Date: Jan 2007 Location: South Shore, MA iTrader: (62)	turner motorsport doesnt make or offer an 8mm spacer. Ive searched everywhere as I really need a set. All I see is either a 5mm or a 10mm. If you have a set can you give me some more info please. thanks __________________ 2021 M5 COMPETITION LCI Brands Hatch Gray on SIlverstone, carbon roof, comp wheels, Mperf splitter, carbon pro spoiler, carbon diffuser , carbon paddles, executive pkg. Dinan HAS, RaceChip, dinan spacers, FC stud kit, etc
	Appreciate 0 Quote

08-05-2010, 05:00 PM	#19
The HACK Midlife Crises Racing Silent but Deadly Class 1832 Rep 5,337 Posts Drives: 2006 MZ4C, 2021 Tesla Model 3 Join Date: Oct 2007 Location: Welcome to Jamaica have a nice day iTrader: (1)	Huh. Don't know how I found this. http://www.turnermotorsport.com/html..._ID=TWH9905003 It appears Turner does not list this as a "fit" for the E9X, however based on what I know there's no difference in design of the hub to require a different fitment between E46 and E9X.
	Appreciate 0 Quote