AluFelgen CS7s on E92-help!

RON1X · 10-26-2010, 12:30 PM

Guys, as a disclaimer, I have searched and have found so many different discussions, but none are answering my specific question.

I have an E92 with sports package. Are the AluFelgen CS7s going to look good with 19x8.5 ET35 and 19x9.5 ET35? I really want the 19x10 VB3 concavity, but I just like the AluFelgen low-pressure casting. Is the concavity on the rears, even with a ET35 offset going to look good? What about doing ET22 in the rear? Am I going to run into any problems with 265/30 tires rubbing in the rear?

I really appreciate it guys.

mister wiggles · 10-26-2010, 12:39 PM

et22 in the rears should be manageable. you MAY need a slight fender roll, but thats only if you roll with fat girls.

VMR has a coupe running 19x9.5f et3x and 19x10r et22 on sport suspension

Javier · 10-26-2010, 05:11 PM

i'm interested in this thread too. love VMR look, love Alufelgen's lp casting more...

enrita · 10-26-2010, 05:32 PM

IF you have e92 ET should be 33?
Here some pics of my car with the Alufelgen with ET 35 front and ET 33 back.

RON1X · 10-26-2010, 06:27 PM

enrita, thanks! I was actually going to PM you about your fitment. thanks for posting these pics!

But yes, AluFelgen stated the wheel was designed for optimal concavity at 19x9.5 ET33. http://www.e90post.com/forums/showpo...12&postcount=7 [last sentence above the design picture]
That is what I had to make this thread!
Damn I want to order these wheels right now, but vendors are ONLY selling ET35 rears!

WHERE CAN I GET SOME ET33?

scottp999 · 10-26-2010, 07:28 PM

I have an original batch CS7 that was ET30. I would not do ET22. ET30 max. ET33 should be good. You could always do ET35 and run a small spacer. The pictures are on stock sport suspension and with 265/30/19 in the rear. No rubbing, even after lowered about 4mm in the rear with the BMW perf suspension.

RON1X · 10-26-2010, 08:18 PM

thanks for all of the info, I really appreciate it! Talked with vendor dtmrack who is AluFelgens stocking distributor and they assured me that they currently only make ET35 rears now (which is why I couldn't find any reliable info after extensive searching).

I guess that is the route I will be going. I am sure they will soon be making 19x10s after I order these... just my luck haha. Will be putting my order in soon! I love the look of the CS7s!

enrita · 10-27-2010, 08:13 AM

Are you lowered? because with 265 back i was rubbing with ET33 with full load and some bumps. there is not much difference between ET 33 and ET35. i actually prefer to be able to fit a bigger tyre without rubbing than to have the wheel aligned.
I have now ET35 on the Advans and i will fit 275 next time.

here you can see with ET35

10-26-2010, 12:30 PM	#1
RON1X Colonel 76 Rep 2,491 Posts Drives: 991 C2S Guards Red Join Date: Aug 2009 Location: Nashville, TN iTrader: (8) Garage List 2008 E92 M3 [9.00]	AluFelgen CS7s on E92-help! Guys, as a disclaimer, I have searched and have found so many different discussions, but none are answering my specific question. I have an E92 with sports package. Are the AluFelgen CS7s going to look good with 19x8.5 ET35 and 19x9.5 ET35? I really want the 19x10 VB3 concavity, but I just like the AluFelgen low-pressure casting. Is the concavity on the rears, even with a ET35 offset going to look good? What about doing ET22 in the rear? Am I going to run into any problems with 265/30 tires rubbing in the rear? I really appreciate it guys. __________________ 991.1 C2S PDK, Guards Red \| PDCC \| Sport Chrono + \| Clear Tail Lights \| Alcantara Steering Wheel \| HRE FF01 \| TechArt Springs \| Sport Exhaust Previous: Porsche 997 Turbo 6MT, Atlas Gray \| Cobb Stage 2 \| HRE FF01 \| Europipe Stg. 2 Exhaust \| GMG LMS Rollbar \| GT2 Exhaust Tips \| Pagid RS-29 \| Rennline Pedals \| SSK 997.2 Track Car, heavily modded & E92 M3 DCT, still miss her daily & E92 335i heavily modded
	Appreciate 0 Tweet Quote

10-26-2010, 12:39 PM	#2
mister wiggles Captain 50 Rep 710 Posts Drives: F10 Join Date: Jan 2010 Location: Houston iTrader: (14)	et22 in the rears should be manageable. you MAY need a slight fender roll, but thats only if you roll with fat girls. VMR has a coupe running 19x9.5f et3x and 19x10r et22 on sport suspension
	Appreciate 0 Quote

10-26-2010, 05:11 PM	#3
Javier Major 89 Rep 1,109 Posts Drives: 335i E92 Join Date: Nov 2006 Location: Puerto Rico iTrader: (0)	i'm interested in this thread too. love VMR look, love Alufelgen's lp casting more... __________________ 2007 328i Crimson Red SOLD 2010 335i MSport AW E92
	Appreciate 0 Quote

10-26-2010, 05:32 PM	#4
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	IF you have e92 ET should be 33? Here some pics of my car with the Alufelgen with ET 35 front and ET 33 back. Attached Images __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

10-26-2010, 06:27 PM	#5
RON1X Colonel 76 Rep 2,491 Posts Drives: 991 C2S Guards Red Join Date: Aug 2009 Location: Nashville, TN iTrader: (8) Garage List 2008 E92 M3 [9.00]	enrita, thanks! I was actually going to PM you about your fitment. thanks for posting these pics! But yes, AluFelgen stated the wheel was designed for optimal concavity at 19x9.5 ET33. http://www.e90post.com/forums/showpo...12&postcount=7 [last sentence above the design picture] That is what I had to make this thread! Damn I want to order these wheels right now, but vendors are ONLY selling ET35 rears! WHERE CAN I GET SOME ET33? __________________ 991.1 C2S PDK, Guards Red \| PDCC \| Sport Chrono + \| Clear Tail Lights \| Alcantara Steering Wheel \| HRE FF01 \| TechArt Springs \| Sport Exhaust Previous: Porsche 997 Turbo 6MT, Atlas Gray \| Cobb Stage 2 \| HRE FF01 \| Europipe Stg. 2 Exhaust \| GMG LMS Rollbar \| GT2 Exhaust Tips \| Pagid RS-29 \| Rennline Pedals \| SSK 997.2 Track Car, heavily modded & E92 M3 DCT, still miss her daily & E92 335i heavily modded
	Appreciate 0 Quote

10-26-2010, 07:28 PM	#6
scottp999 Brigadier General 136 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	I have an original batch CS7 that was ET30. I would not do ET22. ET30 max. ET33 should be good. You could always do ET35 and run a small spacer. The pictures are on stock sport suspension and with 265/30/19 in the rear. No rubbing, even after lowered about 4mm in the rear with the BMW perf suspension. Attached Images
	Appreciate 0 Quote

10-26-2010, 08:18 PM	#7
RON1X Colonel 76 Rep 2,491 Posts Drives: 991 C2S Guards Red Join Date: Aug 2009 Location: Nashville, TN iTrader: (8) Garage List 2008 E92 M3 [9.00]	thanks for all of the info, I really appreciate it! Talked with vendor dtmrack who is AluFelgens stocking distributor and they assured me that they currently only make ET35 rears now (which is why I couldn't find any reliable info after extensive searching). I guess that is the route I will be going. I am sure they will soon be making 19x10s after I order these... just my luck haha. Will be putting my order in soon! I love the look of the CS7s! __________________ 991.1 C2S PDK, Guards Red \| PDCC \| Sport Chrono + \| Clear Tail Lights \| Alcantara Steering Wheel \| HRE FF01 \| TechArt Springs \| Sport Exhaust Previous: Porsche 997 Turbo 6MT, Atlas Gray \| Cobb Stage 2 \| HRE FF01 \| Europipe Stg. 2 Exhaust \| GMG LMS Rollbar \| GT2 Exhaust Tips \| Pagid RS-29 \| Rennline Pedals \| SSK 997.2 Track Car, heavily modded & E92 M3 DCT, still miss her daily & E92 335i heavily modded
	Appreciate 0 Quote

10-27-2010, 08:13 AM	#8
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Are you lowered? because with 265 back i was rubbing with ET33 with full load and some bumps. there is not much difference between ET 33 and ET35. i actually prefer to be able to fit a bigger tyre without rubbing than to have the wheel aligned. I have now ET35 on the Advans and i will fit 275 next time. here you can see with ET35 __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade Last edited by enrita; 10-27-2010 at 08:26 AM..
	Appreciate 0 Quote