Tune vs Wastegate rattle??

Fernflex · 10-15-2010, 07:07 PM

I have a Jb3 version 2.0 and a really bad wastegate rattle I was going to take my car to warranty and took out the jb3 and the rattle is gone 98%.

Has anyone also seen this?

http://www.e90post.com/forums/showth...procede+rattle

caradd · 10-15-2010, 07:49 PM

My situation is rattle with stock but with Procede you can adjust the wastegate to get rid of it.

Fernflex · 10-17-2010, 05:01 PM

Thanks!

Ghines1279 · 10-18-2010, 07:19 AM

I noticed the same thing with my JB. I even tried the bypass fix, no joy. With the dealers I had a pretty bad run around with my wastegates trying to get them fixed. Its such a horrible sound, and people are like "hey dude, whats wrong with your car". switched to the procede from JB after research, being able to manualy adjust your WG was a big seller. Some times with auto tune it adjusts the value back up to where it will rattle for a bit, and then after driving it for a couple miles it adjusts back to where it wont do it, If it bothers you that much you can always turn off the auto tune.

J-Sud · 10-18-2010, 07:47 AM

what year is your car?

Fernflex · 10-18-2010, 10:09 AM

Im starting to like Procede, I really hate the rattle sound and the difference with JB3 and without is huge and with JB3 so far there is nothing I can do!

Bakeme521 · 10-18-2010, 10:49 AM

Car goes in at noon today for wastegate rattle.

OpenFlash · 10-18-2010, 01:25 PM

To those experiencing rattle with the Procede, just lower the wastegate position value to the minimum setting (30%). This will keep your wastegates open during deccel, light cruise and idle. During these conditions, your exhaust note will sound a little bit deeper and your rattle will be eliminated. My early production 2007 car with original 75k miles wastegate/turbos rattle like crazy stock. With this Procede adjustment, I can't get them to make a noise.

Keep in mind that the car needs to be warmed up above 170f oil temp before the Procede adjusts the wastegate position. So you will still hear rattle when the engine is cold. And it will suddenly stop once the car warms up a bit.

BobS · 10-18-2010, 01:31 PM

2007, 48k miles, no wg rattle at all stock or with Giac.

dbjb · 11-02-2010, 04:21 PM

Quote:

Originally Posted by shiv@vishnu

To those experiencing rattle with the Procede, just lower the wastegate position value to the minimum setting (30%). This will keep your wastegates open during deccel, light cruise and idle. During these conditions, your exhaust note will sound a little bit deeper and your rattle will be eliminated. My early production 2007 car with original 75k miles wastegate/turbos rattle like crazy stock. With this Procede adjustment, I can't get them to make a noise.

Keep in mind that the car needs to be warmed up above 170f oil temp before the Procede adjusts the wastegate position. So you will still hear rattle when the engine is cold. And it will suddenly stop once the car warms up a bit.

I'm at 50% and am still hearing rattle. Of course the car is cold so I'll wait a little while and check again.

Question, is there any reason to try 90 > 80 > etc? Should I just go straight to 30?

BTW Shiv, you must have a million subscriptions.

faded67 · 11-03-2010, 11:14 AM

I have the GIAC Stage 1 and bad rattle, but the rattle was there before I got flashed.

View Poll Results: Do you have Wastegate rattle?
Yes and my car is stock	12	20.34%
I don't have	10	16.95%
Yes and I have Procede	7	11.86%
No and I have Procede	10	16.95%
Yes and I have JB3	7	11.86%
No and I have JB3	13	22.03%
Voters: 59. You may not vote on this poll

10-15-2010, 07:07 PM	#1
Fernflex First Lieutenant 49 Rep 334 Posts Drives: E92 Crimson Red 335i Join Date: Oct 2009 Location: Guaynabo iTrader: (9)	Tune vs Wastegate rattle?? I have a Jb3 version 2.0 and a really bad wastegate rattle I was going to take my car to warranty and took out the jb3 and the rattle is gone 98%. Has anyone also seen this? http://www.e90post.com/forums/showth...procede+rattle __________________ R56 Cooper S E92 335i E30 332is Burger Tuning, Evolution Racewerks and VRFS in Puerto Rico... Last edited by Fernflex; 10-15-2010 at 07:16 PM..
	Appreciate 0 Tweet Quote

10-15-2010, 07:49 PM	#2
caradd () () 10 Rep 436 Posts Drives: 2007 e92 335i 6mt Join Date: Jun 2009 Location: Here iTrader: (3)	My situation is rattle with stock but with Procede you can adjust the wastegate to get rid of it. __________________
	Appreciate 0 Quote

10-17-2010, 05:01 PM	#3
Fernflex First Lieutenant 49 Rep 334 Posts Drives: E92 Crimson Red 335i Join Date: Oct 2009 Location: Guaynabo iTrader: (9)	Thanks! __________________ R56 Cooper S E92 335i E30 332is Burger Tuning, Evolution Racewerks and VRFS in Puerto Rico...
	Appreciate 0 Quote

10-18-2010, 07:19 AM	#4
Ghines1279 Second Lieutenant 7 Rep 238 Posts Drives: F30 335i Join Date: Mar 2009 Location: SAN DIEGO! iTrader: (5) Garage List 2007 e92 335i [0.00]	I noticed the same thing with my JB. I even tried the bypass fix, no joy. With the dealers I had a pretty bad run around with my wastegates trying to get them fixed. Its such a horrible sound, and people are like "hey dude, whats wrong with your car". switched to the procede from JB after research, being able to manualy adjust your WG was a big seller. Some times with auto tune it adjusts the value back up to where it will rattle for a bit, and then after driving it for a couple miles it adjusts back to where it wont do it, If it bothers you that much you can always turn off the auto tune.
	Appreciate 0 Quote

10-18-2010, 07:47 AM	#5
J-Sud Captain 143 Rep 885 Posts Drives: 2023 M2 Join Date: Aug 2007 Location: Houston, TX iTrader: (1)	what year is your car? __________________ Current: 2023 M2 PAST: 2022 Audi E-tron GT, 2021 Lexus LC 500, 2020 Maserati Ghibli S, 2015 M235i, 2014 Audi TTS, 2012 Lexus IS-F, 2009 BMW 135i, 2004 VW GTI
	Appreciate 0 Quote

10-18-2010, 10:09 AM	#6
Fernflex First Lieutenant 49 Rep 334 Posts Drives: E92 Crimson Red 335i Join Date: Oct 2009 Location: Guaynabo iTrader: (9)	Im starting to like Procede, I really hate the rattle sound and the difference with JB3 and without is huge and with JB3 so far there is nothing I can do! __________________ R56 Cooper S E92 335i E30 332is Burger Tuning, Evolution Racewerks and VRFS in Puerto Rico...
	Appreciate 0 Quote

10-18-2010, 10:49 AM	#7
Bakeme521 Some say... 251 Rep 4,296 Posts Drives: Fresh Join Date: Mar 2010 Location: Baton Rouge n NOLA iTrader: (12) Garage List 2007 BMW 335i [8.24]	Car goes in at noon today for wastegate rattle. __________________ I have exhaust and an intake...
	Appreciate 0 Quote

10-18-2010, 01:25 PM	#8
OpenFlash 1809 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	To those experiencing rattle with the Procede, just lower the wastegate position value to the minimum setting (30%). This will keep your wastegates open during deccel, light cruise and idle. During these conditions, your exhaust note will sound a little bit deeper and your rattle will be eliminated. My early production 2007 car with original 75k miles wastegate/turbos rattle like crazy stock. With this Procede adjustment, I can't get them to make a noise. Keep in mind that the car needs to be warmed up above 170f oil temp before the Procede adjusts the wastegate position. So you will still hear rattle when the engine is cold. And it will suddenly stop once the car warms up a bit.
	Appreciate 0 Quote

10-18-2010, 01:31 PM	#9
BobS Colonel 98 Rep 2,002 Posts Drives: M3 Join Date: Feb 2009 Location: Southern NJ iTrader: (0)	2007, 48k miles, no wg rattle at all stock or with Giac. __________________ ESS 650 ACM-R Upgrades
	Appreciate 0 Quote

11-03-2010, 11:14 AM	#11
faded67 Private First Class 3 Rep 128 Posts Drives: 2007 AW 335i Sedan Join Date: Apr 2010 Location: Reston, VA iTrader: (1) Garage List 2007 335i [0.00]	I have the GIAC Stage 1 and bad rattle, but the rattle was there before I got flashed.
	Appreciate 0 Quote