Wheels Stuck

Brey335i · 11-29-2010, 12:53 PM

I tried taking off my front wheels this weekend and even after taking off all 5 nuts, the wheels are completely stuck to the car in the front. Any suggestions on how to get them off?

Express · 11-29-2010, 12:57 PM

kick it on each side really hard.

remmib · 11-29-2010, 01:22 PM

Interesting that it's stuck in the front, my wheels are often a bit stuck in the rear, but very easy to get of in the front.

Coolieman1220 · 11-29-2010, 01:51 PM

Screw the lugs back in a little and put the car back down, the outward force should pop them off, or you can kick them. That usually works.

psre08 · 11-29-2010, 01:55 PM

Changed my wheels yesterday... rear wheels were on pretty good after all lugs were removed, so a few solid karate kicks did the trick.

Brey335i · 11-29-2010, 01:56 PM

As I gather so far, we follow the scientific solution of kicking them really hard. Very well, I will do that

PTinVT · 11-29-2010, 02:23 PM

Get a big rubber mallet, bang away at inside of tire with car in the air. (I was never a fan of the "just kick it" method)

Gavin@MMW · 11-29-2010, 02:26 PM

Quote:

Originally Posted by express705

kick it on each side really hard.

This

Babydragon · 11-29-2010, 08:29 PM

Little elbow grease. Kick it or hit it with a rubber mallet.

Tzu · 11-30-2010, 01:54 AM

I'd soak in penetrating lube for 10-15 mins and then kick. It requires the impulse of the kick but not as much force.

wchoy · 11-30-2010, 05:05 AM

LOL @ all of the above. hope you get the wheel off OP

Tallest · 11-30-2010, 09:04 AM

just kick it at the top of the wheel, you must not be trying hard enough, the are rarely stuck so much that you can't get them off.

**OEMconcept** · 11-30-2010, 09:39 AM

Anti-Seize is your friend. Always put Anti-Seize on your hub and a little dab on each bolt and you'll never have this problem. Ever!

Mr. ///M3 RD · 11-30-2010, 10:07 AM

Quote:

Originally Posted by Coolieman1220

Screw the lugs back in a little and put the car back down, the outward force should pop them off, or you can kick them. That usually works.

Wow .... Hope you never ever do that !

Coolieman1220 · 12-03-2010, 01:18 AM

Quote:

Originally Posted by Rolf-Dieter

Wow .... Hope you never ever do that !

why not? it works!

dj128 · 12-03-2010, 10:39 AM

Quote:

Originally Posted by OEMconcept

Anti-Seize is your friend. Always put Anti-Seize on your hub and a little dab on each bolt and you'll never have this problem. Ever!

+1000

IN54NITY · 12-03-2010, 11:47 AM

Quote:

Originally Posted by OEMconcept

Anti-Seize is your friend. Always put Anti-Seize on your hub and a little dab on each bolt and you'll never have this problem. Ever!

Yep. +1000 again. A tube is worth the $6 or whatever it is. As for getting it off, do use impact force (= F/t ... I'm a nerd), use a rubber mallet and hit the bottom of the tire out, eg, hit from inside. Double check your jackstands.

chuckee98 · 12-03-2010, 12:13 PM

Quote:

Originally Posted by OEMconcept

Anti-Seize is your friend. Always put Anti-Seize on your hub and a little dab on each bolt and you'll never have this problem. Ever!

Hub, yes - always. Bolts, NO - never on the bolts. Anti-seize on the lug bolts will affect the torque measured on your torque wrench.

IN54NITY · 12-03-2010, 12:36 PM

Quote:

Originally Posted by chuckee98

Hub, yes - always. Bolts, NO - never on the bolts. Anti-seize on the lug bolts will affect the torque measured on your torque wrench.

Good point. Threads should just be very clean and dry. With anti-seize, you run the risk of breaking threads. That being said, I think he referring to very salty and wet northeast winter roads, where corrosion is a big issue for some.

fdriller9 · 12-03-2010, 12:42 PM

Is it really that hard to coat the hubs? I realize that this would drive up production costs/time for BMW but seriously.

My dad's E65 has never had the wheels removed. I tried to change his brakes the other month and I gave up because I couldn't get the wheels off. I kicked, rubber mallet'd, and screamed at the wheels for like an hour.

vasillalov · 12-03-2010, 12:44 PM

Quote:

Originally Posted by chuckee98

Hub, yes - always. Bolts, NO - never on the bolts. Anti-seize on the lug bolts will affect the torque measured on your torque wrench.

Oh please, if you use some common sense when tightening the bolts you will know when to stop tightening to prevent over torquing them. I've always put a bit of Antiseize on the bolts of all of my vehicles and I am yet to have problems.

IN54NITY · 12-03-2010, 12:55 PM

Quote:

Originally Posted by *********

Is it really that hard to coat the hubs? I realize that this would drive up production costs/time for BMW but seriously.

My dad's E65 has never had the wheels removed. I tried to change his brakes the other month and I gave up because I couldn't get the wheels off. I kicked, rubber mallet'd, and screamed at the wheels for like an hour.

Get a 2x4 of wood, have some one hold it to the inside bottom of tire/wheel and hit it hard! It will only get worse with time, you gotta get it off. Then anti-seize it.

Too bad dealerships don't do this when they take delivery, especially back east/ocean climates where there's salt.

Anyone have a nightmare story of breaking a lug nut in the wheel?

11-29-2010, 12:53 PM	#1
Brey335i Banned 121 Rep 4,771 Posts Drives: e46 ///M3 Join Date: Oct 2009 Location: Austin, TX iTrader: (11)	Wheels Stuck I tried taking off my front wheels this weekend and even after taking off all 5 nuts, the wheels are completely stuck to the car in the front. Any suggestions on how to get them off?
	Appreciate 0 Tweet Quote

11-29-2010, 12:57 PM	#2
Express Major General 390 Rep 8,688 Posts Drives: 06 330i Join Date: Dec 2008 Location: The Promise Land iTrader: (17) Garage List 2006 BMW 330i [8.30]	kick it on each side really hard.
	Appreciate 0 Quote

11-29-2010, 01:22 PM	#3
remmib General 1596 Rep 29,217 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	Interesting that it's stuck in the front, my wheels are often a bit stuck in the rear, but very easy to get of in the front. __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

11-29-2010, 01:51 PM	#4
Coolieman1220 Banned 76 Rep 1,770 Posts Drives: 2010 335d Join Date: Jul 2010 Location: New York City iTrader: (0)	Screw the lugs back in a little and put the car back down, the outward force should pop them off, or you can kick them. That usually works.
	Appreciate 0 Quote

11-29-2010, 01:55 PM	#5
psre08 Second Lieutenant 13 Rep 204 Posts Drives: 330i E90 & 330Ci E46 Join Date: Jun 2010 Location: Ottawa iTrader: (3)	Changed my wheels yesterday... rear wheels were on pretty good after all lugs were removed, so a few solid karate kicks did the trick.
	Appreciate 0 Quote

11-29-2010, 01:56 PM	#6
Brey335i Banned 121 Rep 4,771 Posts Drives: e46 ///M3 Join Date: Oct 2009 Location: Austin, TX iTrader: (11)	As I gather so far, we follow the scientific solution of kicking them really hard. Very well, I will do that
	Appreciate 0 Quote

11-29-2010, 02:23 PM	#7
PTinVT armchair enthusiast 742 Rep 1,221 Posts Drives: E31+F30+G29 = :D Join Date: Feb 2009 Location: Burlington, VT iTrader: (3)	Get a big rubber mallet, bang away at inside of tire with car in the air. (I was never a fan of the "just kick it" method) __________________ '25 Z4 M40i 6MT Portimao/Cognac '18 340i xDrive M-Sport 6MT Estoril Blue 2/Dakota '93 850Ci 4AT Oxford Green/Parchment '71 Buick Riviera, 455 V8 3AT Land Yacht Past: E46 325Cic, E92 328xi, F06 640xi
	Appreciate 0 Quote

11-29-2010, 08:29 PM	#9
Babydragon Captain 37 Rep 781 Posts Drives: 2007 328xi Join Date: Nov 2010 Location: Chic/ago iTrader: (0)	Little elbow grease. Kick it or hit it with a rubber mallet.
	Appreciate 0 Quote

11-30-2010, 01:54 AM	#10
Tzu Lieutenant Colonel 31 Rep 1,551 Posts Drives: 335i Join Date: Jun 2010 Location: Toronto iTrader: (1)	I'd soak in penetrating lube for 10-15 mins and then kick. It requires the impulse of the kick but not as much force.
	Appreciate 0 Quote

11-30-2010, 05:05 AM	#11
wchoy First Lieutenant 6 Rep 311 Posts Drives: '08 AW e90 335i Join Date: Apr 2010 Location: Honolulu, Hawaii / LA iTrader: (0)	LOL @ all of the above. hope you get the wheel off OP
	Appreciate 0 Quote

11-30-2010, 09:04 AM	#12
Tallest Major General 1587 Rep 6,437 Posts Drives: 911 Join Date: Sep 2007 Location: Sweden iTrader: (1) Garage List 2011 911 [10.00]	just kick it at the top of the wheel, you must not be trying hard enough, the are rarely stuck so much that you can't get them off. __________________ 997.2 F30.F11.E86.E90.E90.E36
	Appreciate 0 Quote

11-30-2010, 09:39 AM	#13
OEMconcept 258 Rep 1,635 Posts Drives: BMW Join Date: Dec 2009 Location: Canada/U.S iTrader: (9)	Anti-Seize is your friend. Always put Anti-Seize on your hub and a little dab on each bolt and you'll never have this problem. Ever!
	Appreciate 0 Quote

12-03-2010, 12:42 PM	#20
fdriller9 Banned 263 Rep 7,089 Posts Drives: '06 AW 330xi Join Date: Mar 2009 Location: North Jersey/Philly/NYC iTrader: (4) Garage List 2006 330xi [6.44]	Is it really that hard to coat the hubs? I realize that this would drive up production costs/time for BMW but seriously. My dad's E65 has never had the wheels removed. I tried to change his brakes the other month and I gave up because I couldn't get the wheels off. I kicked, rubber mallet'd, and screamed at the wheels for like an hour.
	Appreciate 0 Quote