Start Boost % to PSI conversion (PROcede settings)

mke135i · 01-16-2011, 03:50 PM

Can you guys please check my formula on the spreadsheet linked and see if it's correct? I'm trying to convert the Start Boost % to PSI used on the PROcede user adjustable parameters.

https://spreadsheets.google.com/ccc?...0dzNWX0E&hl=en

Thanks

themyst · 01-16-2011, 03:53 PM

Quote:

Originally Posted by mke135i

Can you guys please check my formula on the spreadsheet linked and see if it's correct? I'm trying to convert the Start Boost % to PSI used on the PROcede user adjustable parameters.

https://spreadsheets.google.com/ccc?...0dzNWX0E&hl=en

Thanks

50 = 15psi, or at least it should be.

Calvin@Vishnu · 01-16-2011, 03:57 PM

Your spreadsheet is off

It's easier than you think:

0%=10psi
10%=11psi
.
.
.
50%=15psi
55%=15.5psi
60%=16psi
.
.
.
100%=20psi

mke135i · 01-16-2011, 04:02 PM

Calvin,
Thanks for clearing that up. Procede software says (11-20psi) but you are saying 0% is 10psi... that's how I calculated... 0% being 11psi.
Fixed the spreadsheet

Calvin@Vishnu · 01-16-2011, 04:11 PM

Quote:

Originally Posted by mke135i

Calvin,
Thanks for clearing that up. Procede software says (11-20psi) but you are saying 0% is 10psi... that's how I calculated... 0% being 11psi.
Fixed the spreadsheet

That's because the minimum allowing user input is 10%, so 11psi.

01-16-2011, 03:50 PM	#1
mke135i Lieutenant 19 Rep 436 Posts Drives: 2008 BMW 135i Cabrio Join Date: Oct 2010 Location: Midwest iTrader: (3) Garage List 2008 135i [0.00]	Start Boost % to PSI conversion (PROcede settings) Can you guys please check my formula on the spreadsheet linked and see if it's correct? I'm trying to convert the Start Boost % to PSI used on the PROcede user adjustable parameters. https://spreadsheets.google.com/ccc?...0dzNWX0E&hl=en Thanks
	Appreciate 0 Tweet Quote

01-16-2011, 03:57 PM	#3
Calvin@Vishnu 52 Rep 428 Posts Drives: 2010 335i Join Date: Dec 2006 Location: NorCal iTrader: (0)	Your spreadsheet is off It's easier than you think: 0%=10psi 10%=11psi . . . 50%=15psi 55%=15.5psi 60%=16psi . . . 100%=20psi
	Appreciate 0 Quote

01-16-2011, 04:02 PM	#4
mke135i Lieutenant 19 Rep 436 Posts Drives: 2008 BMW 135i Cabrio Join Date: Oct 2010 Location: Midwest iTrader: (3) Garage List 2008 135i [0.00]	Calvin, Thanks for clearing that up. Procede software says (11-20psi) but you are saying 0% is 10psi... that's how I calculated... 0% being 11psi. Fixed the spreadsheet
	Appreciate 0 Quote