where can i get Boost Gauge

LACA335i · 04-30-2007, 01:04 AM

where do i buy boost gauge indicator ? how much? who make for e90 335i?is it easy to install ?also without punch any whole on my firewall or car

ibd12nv · 04-30-2007, 01:11 AM

+1 LED

SROC3 · 04-30-2007, 01:34 AM

Best Boost gauges on the planet - also very expensive.

http://www.racerwheel.com/defi-df04302.html

LOLrance · 04-30-2007, 03:24 AM

Quote:

Originally Posted by SROC3

Best Boost gauges on the planet - also very expensive.

http://www.racerwheel.com/defi-df04302.html

+1 for Defi, definetly the best gauges but they can be pricey.

wj4 · 04-30-2007, 04:48 AM

The Defi is definitely worth the price and installation is a lot easier than the cheaper gauges. I had the Defi BF set up in the old car and loved it. I will eventually get it again for the 335i.

Since you are in Alhambra, you can contact Jeffrey at www.500whp.com

He is located in Hacienda Heights, around the Puente Hills area. He can get you the Defi gauges, like he did for me. If you go to his place and pay cash, there is also no tax.

I bought my Defi BF boost, oil pressure, and EGT gauge, the control unit, and the panel for my Evo from him for $800 everything...other sellers were selling them for $1,000.

Tell him WJ4 or Wis sent you, he will hook you up the best he can!

BoostedBMW · 04-30-2007, 03:04 PM

Quote:

Originally Posted by SROC3

Best Boost gauges on the planet - also very expensive.

http://www.racerwheel.com/defi-df04302.html

Just keep in mind that you need the controller unit also with that series Defi.

I had a defi in the s2k, I love their gauges.

e.n335 · 05-01-2007, 03:53 AM

I bought

Innovate Motorsports XD-16 gauges for boost and afr ( controller is needed ):

Side view:

Pricey, but you can scale up to a complete datalogging system, capable for countinuosly 20 hr+ data logging, depending on the size of the SD-memory card ( currently 512 MB from my old iPaq ) you plug into the DL-32 controller. Add a LC-1 wideband sensor and you are fine. Currently I try to find out if the 335i ECU has an EGT input. I hate the idea to drill a hole into the turbo manifold to install a fast responding type K thermocouple for measuring and recording EGT's

. If I have to, it will be a huge effort and I will do it between cylinder 5 and 6

.

Other products and cheaper combinations are available. I saw, jon@themshop sells that stuff. I purchased everything in Germany.

A good start for boost gauge would be one XD-16 Gauge ( $ 229 list price ) and one LMA-3 controller ( $ 249 list price ). Kits are available.

Cheers
Eugen

LACA335i · 05-01-2007, 07:56 AM

please help me choose

Spool · 05-01-2007, 08:57 AM

www.ebay.com

They have everything there, you can even by your mothers there...

bronco · 05-01-2007, 09:06 AM

Quote:

Originally Posted by Spool

www.ebay.com

They have everything there, you can even by your mothers there...

:mad:

ALPINE6SPD · 05-01-2007, 09:25 AM

If your looking for a boost gauge I would go with DEFI

bronco · 05-01-2007, 09:38 AM

Quote:

Originally Posted by ALPINE6SPD

If your looking for a boost gauge I would go with DEFI

DEFI is good

but can be expensive

e.n335 · 05-01-2007, 11:16 AM

A mechanical Autogauge boost gauge is cheap and works and I don't like the design. Look around, prices start at $50 ...

Sometimes you will exchange it with a better looking gauge. So $50 waste.

Cheers
Eugen

e.n335 · 05-01-2007, 11:27 AM

Quote:

Originally Posted by LACA335i

please help me choose

The worst thing you can do is not to decide. Even a wrong decision is better than no decision. Old management rule. True.

Go for Defi or Innovate.

Cheers
Eugen

p.s. I bought a cheap mechanical boost gauge to immediately install it when the car arrives. Maybe I will have a PROcede. After that I will have plenty of time to install the datalogging system and the XD-16 gauges. When installed, everybody can have my cheap boost gauge for free by paying for the shipment. Word. Cheaper is not possible, but I will take my time.

chenyang · 05-02-2007, 11:54 AM

http://www.e90post.com/forums/showthread.php?t=57737
I installde it by myself...I used about 7 hours to finish them!!

chenyang · 05-02-2007, 11:56 AM

Quote:

Originally Posted by eugen.niederreiter

The worst thing you can do is not to decide. Even a wrong decision is better than no decision. Old management rule. True.

Go for Defi or Innovate.

Cheers
Eugen

p.s. I bought a cheap mechanical boost gauge to immediately install it when the car arrives. Maybe I will have a PROcede. After that I will have plenty of time to install the datalogging system and the XD-16 gauges. When installed, everybody can have my cheap boost gauge for free by paying for the shipment. Word. Cheaper is not possible, but I will take my time.

Could you tell me how mush the boost pressure after intalling PROcede?

e.n335 · 05-02-2007, 03:35 PM

Quote:

Originally Posted by chenyang

Could you tell me how mush the boost pressure after intalling PROcede?

Depends on the map you use. max 13 psi in the lower rpm's.

Cheers
Eugen

04-30-2007, 01:04 AM	#1
LACA335i Lieutenant Colonel 190 Rep 1,517 Posts Drives: E92 335i coupe Black AUTO Join Date: Apr 2007 Location: Alhambra, CA iTrader: (0) Garage List 2007 335I SEDAN [0.00]	where can i get Boost Gauge where do i buy boost gauge indicator ? how much? who make for e90 335i?is it easy to install ?also without punch any whole on my firewall or car Last edited by LACA335i; 04-30-2007 at 01:36 AM..
	Appreciate 0 Tweet Quote

04-30-2007, 01:11 AM	#2
ibd12nv Chief Warrant Officer 4 54 Rep 726 Posts Drives: 335I, E46 M3, X5M Join Date: Feb 2007 Location: Back in the US iTrader: (0) Garage List 2007 E90 335i [10.00]	+1 LED
	Appreciate 0 Quote

04-30-2007, 01:34 AM	#3
SROC3 The limit of adhesion is my home. 1732 Rep 3,774 Posts Drives: Like a Boss. Join Date: Sep 2006 Location: three.one.zero iTrader: (1)	Best Boost gauges on the planet - also very expensive. http://www.racerwheel.com/defi-df04302.html __________________ 2019 X3 xDrive30i Glacier Silver \| Cognac w/ Fine Cove \| MSport \| Premium \| Dynamic Handling PKG \| Drive Assist \| HK w/ Bavsound Upgrade \|
	Appreciate 0 Quote

04-30-2007, 04:48 AM	#5
wj4 Major General 358 Rep 7,719 Posts Drives: E90 manual 335i Join Date: Nov 2006 Location: Burbank, CA iTrader: (8)	The Defi is definitely worth the price and installation is a lot easier than the cheaper gauges. I had the Defi BF set up in the old car and loved it. I will eventually get it again for the 335i. Since you are in Alhambra, you can contact Jeffrey at www.500whp.com He is located in Hacienda Heights, around the Puente Hills area. He can get you the Defi gauges, like he did for me. If you go to his place and pay cash, there is also no tax. I bought my Defi BF boost, oil pressure, and EGT gauge, the control unit, and the panel for my Evo from him for $800 everything...other sellers were selling them for $1,000. Tell him WJ4 or Wis sent you, he will hook you up the best he can!
	Appreciate 0 Quote

05-01-2007, 03:53 AM	#7
e.n335 Moderator 282 Rep 4,481 Posts Drives: e93 ///M3 DCT, 07/2009 Join Date: Feb 2007 Location: Switzerland, ZH iTrader: (0)	I bought Innovate Motorsports XD-16 gauges for boost and afr ( controller is needed ): Side view: Pricey, but you can scale up to a complete datalogging system, capable for countinuosly 20 hr+ data logging, depending on the size of the SD-memory card ( currently 512 MB from my old iPaq ) you plug into the DL-32 controller. Add a LC-1 wideband sensor and you are fine. Currently I try to find out if the 335i ECU has an EGT input. I hate the idea to drill a hole into the turbo manifold to install a fast responding type K thermocouple for measuring and recording EGT's . If I have to, it will be a huge effort and I will do it between cylinder 5 and 6 . Other products and cheaper combinations are available. I saw, jon@themshop sells that stuff. I purchased everything in Germany. A good start for boost gauge would be one XD-16 Gauge ( $ 229 list price ) and one LMA-3 controller ( $ 249 list price ). Kits are available. Cheers Eugen Last edited by e.n335; 05-01-2007 at 08:30 AM..
	Appreciate 0 Quote

05-01-2007, 07:56 AM	#8
LACA335i Lieutenant Colonel 190 Rep 1,517 Posts Drives: E92 335i coupe Black AUTO Join Date: Apr 2007 Location: Alhambra, CA iTrader: (0) Garage List 2007 335I SEDAN [0.00]	I need Boost Gauge Controller... WHo make the best? HKS? where can i get it please help me choose
	Appreciate 0 Quote

05-01-2007, 08:57 AM	#9
Spool ****** 601 Rep 6,169 Posts Drives: A few Join Date: Apr 2007 Location: DC Metro iTrader: (24)	www.ebay.com They have everything there, you can even by your mothers there... __________________ MKIV 6spd 1000hp Club
	Appreciate 0 Quote

05-01-2007, 09:25 AM	#11
ALPINE6SPD Lieutenant General 161 Rep 10,407 Posts Drives: 2010 BMW 328i Sport Join Date: Dec 2005 Location: Highland Lakes NJ iTrader: (2)	If your looking for a boost gauge I would go with DEFI __________________ 2010 AW e90 328i: 6 speed, Black Leather, Dark Wood trim, ZPP, ZCW, ZVP,ZSP, Nav, Xenon BMW Performance CF Rear spolier and Gloss black grills 2008 Candy White MKV GTI 2.0T 6 Speed Manul Gone 2008 AW X3 3.0si: 6 speed Returned 2006 AW e90 330i: 6 speed Dinan Stage 1 Returned
	Appreciate 0 Quote

05-01-2007, 11:16 AM	#13
e.n335 Moderator 282 Rep 4,481 Posts Drives: e93 ///M3 DCT, 07/2009 Join Date: Feb 2007 Location: Switzerland, ZH iTrader: (0)	A mechanical Autogauge boost gauge is cheap and works and I don't like the design. Look around, prices start at $50 ... Sometimes you will exchange it with a better looking gauge. So $50 waste. Cheers Eugen
	Appreciate 0 Quote

05-02-2007, 11:54 AM	#15
chenyang New Member 0 Rep 19 Posts Drives: E92 335i Join Date: Apr 2007 Location: Taiwan iTrader: (0)	http://www.e90post.com/forums/showthread.php?t=57737 I installde it by myself...I used about 7 hours to finish them!!
	Appreciate 0 Quote