Replacing damaged Oem Oil Cooler help

BoostedBarrett · 03-30-2011, 02:17 PM

My Oem Oil cooler has a smashed hard line coming off the oil cooler. I ordered a new OEM oil cooler and am going go install.

I am planning on draining the oil first. Besides unbolting the rubber hoses from the Oil Cooler, replacing the o-rings and bolting it back up, is there anything I need to know?

What should I torque the bolt holding the rubber lines to the oil cooler hard lines at?

zsapphire7 · 03-30-2011, 03:26 PM

shoulda asked! i have an oem oil cooler lying around... its pretty straight forward. TQ specs i would ask someone with a bentley manual

03-30-2011, 02:17 PM	#1
BoostedBarrett Second Lieutenant 29 Rep 255 Posts Drives: 2016 M3 CS Join Date: Feb 2011 Location: Chattanooga, TN iTrader: (1)	Replacing damaged Oem Oil Cooler help My Oem Oil cooler has a smashed hard line coming off the oil cooler. I ordered a new OEM oil cooler and am going go install. I am planning on draining the oil first. Besides unbolting the rubber hoses from the Oil Cooler, replacing the o-rings and bolting it back up, is there anything I need to know? What should I torque the bolt holding the rubber lines to the oil cooler hard lines at? Last edited by BoostedBarrett; 03-30-2011 at 04:43 PM..
	Appreciate 0 Tweet Quote

03-30-2011, 03:26 PM	#2
zsapphire7 Colonel 115 Rep 2,368 Posts Drives: 08 e92 M3 Join Date: Oct 2007 Location: SF Bay Area iTrader: (21)	shoulda asked! i have an oem oil cooler lying around... its pretty straight forward. TQ specs i would ask someone with a bentley manual
	Appreciate 0 Quote