[ezryder]

Just had a BMW Performance exhaust installed by a highly recommended shop (on my 335i Sedan) and although they did a very clean install, the exhaust tips stick out approx. 2+ inches past the rear valence (bumper). When I questioned this, they indicated this was standard for the Perf. exhaust.

Is this true or perhaps could they have cut the mid pipe a bit short thereby pulling the exhaust forward?

Anyone have any experience with this?

[Beemw335]

You have a sedan, which is shorter than the coupe so most of the exhaust systens out there make a shorter version for the sedan and a longer one for the coupe.
I dont know how the bmw pe wirks, maybe you have one for the coupe???

[ezryder]

I thought of that as I purchased the exhaust used, but it came off a sedan as well. Additionally, the person I purchased it from was well versed in BMW so I assume it was the correct system. I will 2x check

[MthreeMthree]

Mine was the same, from what I've seen on here it's relatively "normal" Do you have an m tech rear bumper? Do the tips look really low as well?
I thought my installer may have screwed up with their cuts at first too, but I don't think the hangers would align properly if they did.

[CobraMarty]

Thats funny because mine on the coupe are just a hair short and I need to adjust the clamps to move them back a 1/2".

[cstraface]

Pics?

[Tzu]

Can you trim 2" of exhaust tubing pre-muffler?

[tscdennab]

I have the Performance Exhaust on the my LCI sedan and it sits great, no unusual protruding. I posted some pictures in another related thread but I'm too lazy to search

[mundo74]

I plan to cut off my stock tips and weld it to the perf exhaust

[Juiced46]

They didnt cut it back short enough.