PROcede ignorance

BavFan_08 · 05-12-2011, 06:38 PM

Guys, I've been searching the forums, but I can't seem to find a definitive answer.

With PROcede Rev 3 (old one) Do I need any other mods? or can I run with everything else stock?

thanks

onebadmofo · 05-12-2011, 06:39 PM

It's kinda like a sandwich. While you can eat bread with cheese it's much better if you also add meat and veggies

Yes you can ©

Darin911 · 05-12-2011, 07:17 PM

when i had V3 and had no mods i just ran it on Map 1

Jeff@TopGearSolutions · 05-12-2011, 07:18 PM

You know Vishnu can likely upgrade you to the latest for a small fee. I would look into it personally.

2kaccordocoupe · 05-13-2011, 10:03 AM

Quote:

Originally Posted by Jeff@topgearsolutions

You know Vishnu can likely upgrade you to the latest for a small fee. I would look into it personally.

+1
The latest v4/v5 is much better plus the install is a breeze.

Mike@N54Tuning.com · 05-13-2011, 10:55 AM

If getting a tune, either the JB or Procede make sure to get the latest version as a lot of improvements have been put into these new versions.

For the Procede its the V5 and for the JB its the JB4

Mike

Spoolin335 · 05-13-2011, 12:01 PM

You can run stock no problem with the PROcede.

Darin911 · 05-13-2011, 05:03 PM

or you can GO MarkD tune. and you never need to remove the tune when you go into service, the regular techs/ master techs at BMW wouldn't be able to see the tune. problem free.

dzenno · 05-13-2011, 05:35 PM

Ever dyno his tune? I talked to Mark a while ago

Darin911 · 05-13-2011, 08:15 PM

Quote:

Originally Posted by dzenno

Ever dyno his tune? I talked to Mark a while ago

gonna dyno after 1000km.

ultimateracing335 · 05-13-2011, 09:26 PM

Are you using champion Darin? Hows the tune feel?

Darin911 · 05-13-2011, 11:45 PM

Quote:

Originally Posted by ultimateracing335

Are you using champion Darin? Hows the tune feel?

yeah i did im coming back after 1000km back to the place

MarkD · 05-14-2011, 09:04 AM

Quote:

Originally Posted by ultimateracing335

Are you using champion Darin? Hows the tune feel?

I was mentioning this car to you last week - I mentioned the rather high baseline results he got.

Darin911 · 05-14-2011, 10:46 PM

i noticed with the MarKD tune i get better fuel efficiency. i did 467.7kms and i used up 3/4 of the tank up. usually im close to empty

domrep · 05-16-2011, 08:32 AM

^ will this tune cooperate with full bolt-ons? Need a re-flash or custom map everytime a new part is added? I'd be interested to see the logs and dyno of this tune as well.

ultimateracing335 · 05-20-2011, 08:02 AM

He can customize it to your mods.

perfectg · 05-20-2011, 02:32 PM

Where is this MarkD tune available?

MarkD · 05-20-2011, 03:05 PM

Only in Toronto as I load them myself! I just bought a silver level sponsorship today so once that is all set up I will provide further info. I would fly out to Vancouver and load cars there if there is enough interest. I can also sell a system with a cable to allow the end user to load their car, that could be available in about 4 weeks.

Darin911 · 05-20-2011, 04:11 PM

Quote:

Originally Posted by MarkD

Only in Toronto as I load them myself! I just bought a silver level sponsorship today so once that is all set up I will provide further info. I would fly out to Vancouver and load cars there if there is enough interest. I can also sell a system with a cable to allow the end user to load their car, that could be available in about 4 weeks.

WICKED!!!

MarkD · 05-20-2011, 04:15 PM

Quote:

Originally Posted by Darin911

WICKED!!!

Now I just have to get your car dyno'd again so I can post it up! I'd like to dyno 335isGuys's at the same time as yours and hopefully in the next week.

perfectg · 05-22-2011, 12:37 PM

Quote:

Originally Posted by MarkD

Only in Toronto as I load them myself! I just bought a silver level sponsorship today so once that is all set up I will provide further info. I would fly out to Vancouver and load cars there if there is enough interest. I can also sell a system with a cable to allow the end user to load their car, that could be available in about 4 weeks.

sweet!!!!!!!!!!!!

05-12-2011, 06:38 PM	#1
BavFan_08 Dreamer 35 Rep 837 Posts Drives: '12 E88 6MT \| Ret '08 E90 335i Join Date: Aug 2009 Location: T.O. Canada iTrader: (2)	PROcede ignorance Guys, I've been searching the forums, but I can't seem to find a definitive answer. With PROcede Rev 3 (old one) Do I need any other mods? or can I run with everything else stock? thanks
	Appreciate 0 Tweet Quote

05-12-2011, 06:39 PM	#2
onebadmofo Colonel 373 Rep 2,394 Posts Drives: 2008 E90 M3 Join Date: Aug 2010 Location: Central NJ iTrader: (14)	It's kinda like a sandwich. While you can eat bread with cheese it's much better if you also add meat and veggies Yes you can ©
	Appreciate 0 Quote

05-12-2011, 07:17 PM	#3
Darin911 Captain 162 Rep 919 Posts Drives: First E92 to E90 conversion! Join Date: Mar 2009 Location: Markham iTrader: (2)	when i had V3 and had no mods i just ran it on Map 1 __________________
	Appreciate 0 Quote

05-12-2011, 07:18 PM	#4
Jeff@TopGearSolutions 3482 Rep 79,210 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	You know Vishnu can likely upgrade you to the latest for a small fee. I would look into it personally.
	Appreciate 0 Quote

05-13-2011, 10:55 AM	#6
Mike@N54Tuning.com Joint Chiefs of Staff 5096 Rep 116,225 Posts Drives: 2007 335i, 2015 M3 Join Date: Dec 2008 Location: N54tuning.com iTrader: (89)	If getting a tune, either the JB or Procede make sure to get the latest version as a lot of improvements have been put into these new versions. For the Procede its the V5 and for the JB its the JB4 Mike
	Appreciate 0 Quote

05-13-2011, 12:01 PM	#7
Spoolin335 Justin Herass 362 Rep 1,205 Posts Drives: X6M / M3 Join Date: Nov 2008 Location: Canada iTrader: (7) Garage List 2015 BMW M3 [0.00] 2012 Audi TTRS [10.00] 2012 BMW X6M [9.00] 2007 BMW 335i [9.00]	You can run stock no problem with the PROcede. __________________
	Appreciate 0 Quote

05-13-2011, 05:03 PM	#8
Darin911 Captain 162 Rep 919 Posts Drives: First E92 to E90 conversion! Join Date: Mar 2009 Location: Markham iTrader: (2)	or you can GO MarkD tune. and you never need to remove the tune when you go into service, the regular techs/ master techs at BMW wouldn't be able to see the tune. problem free. __________________
	Appreciate 0 Quote

05-13-2011, 05:35 PM	#9
dzenno Banned 298 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	Ever dyno his tune? I talked to Mark a while ago
	Appreciate 0 Quote

05-13-2011, 09:26 PM	#11
ultimateracing335 Second Lieutenant 37 Rep 220 Posts Drives: blk 335i sedan with mods Join Date: Oct 2008 Location: toronto canada iTrader: (0)	Are you using champion Darin? Hows the tune feel?
	Appreciate 0 Quote

05-14-2011, 10:46 PM	#14
Darin911 Captain 162 Rep 919 Posts Drives: First E92 to E90 conversion! Join Date: Mar 2009 Location: Markham iTrader: (2)	i noticed with the MarKD tune i get better fuel efficiency. i did 467.7kms and i used up 3/4 of the tank up. usually im close to empty __________________
	Appreciate 0 Quote

05-16-2011, 08:32 AM	#15
domrep Captain 43 Rep 993 Posts Drives: AW E93 335i Join Date: Mar 2009 Location: Toronto iTrader: (3)	^ will this tune cooperate with full bolt-ons? Need a re-flash or custom map everytime a new part is added? I'd be interested to see the logs and dyno of this tune as well.
	Appreciate 0 Quote

05-20-2011, 08:02 AM	#16
ultimateracing335 Second Lieutenant 37 Rep 220 Posts Drives: blk 335i sedan with mods Join Date: Oct 2008 Location: toronto canada iTrader: (0)	He can customize it to your mods.
	Appreciate 0 Quote

05-20-2011, 02:32 PM	#17
perfectg I pwn u 15 Rep 840 Posts Drives: 2012 Audi Q5 Join Date: Oct 2008 Location: Vancouver, BC iTrader: (0) Garage List 2008 335i [0.00]	Where is this MarkD tune available? __________________
	Appreciate 0 Quote

05-20-2011, 03:05 PM	#18
MarkD Second Lieutenant 16 Rep 245 Posts Drives: 74 tii, 93 M5 x2, 07 328i Join Date: Aug 2008 Location: Toronto, in your DME! iTrader: (0)	Only in Toronto as I load them myself! I just bought a silver level sponsorship today so once that is all set up I will provide further info. I would fly out to Vancouver and load cars there if there is enough interest. I can also sell a system with a cable to allow the end user to load their car, that could be available in about 4 weeks. Last edited by MarkD; 05-20-2011 at 03:16 PM..
	Appreciate 0 Quote