|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Anyone here paint their stock calipers?
|
|
05-28-2011, 12:28 PM | #1 |
Came to the N55 Darkside
1131
Rep 12,740
Posts |
Anyone here paint their stock calipers?
Thinking of having mine painted black, but concerned about compromising the braking aspect of things etc and that it might possibly look like a train wreck. Thoughts and experiences from anyone who has?
|
05-28-2011, 12:43 PM | #2 |
Brotographer
91
Rep 1,742
Posts |
Yup, and there doesn't seem to be a problem with it. Try the G2 product listed here. I'd go for 1 batch of silver for all the hubs (I personally hate how they rust), and 1 batch of whatever color you please for the calipers.
And here's a good DIY http://www.e90post.com/forums/showthread.php?t=374404 |
Appreciate
0
|
05-28-2011, 01:39 PM | #3 |
Came to the N55 Darkside
1131
Rep 12,740
Posts |
Rollin, I have to say you are one of the most friendly and helpful folks on the forum these days, and we're from the same state- way to represent man, and thanks! Enjoy your MDW, and be safe out there!
|
Appreciate
0
|
05-28-2011, 02:04 PM | #4 |
Brotographer
91
Rep 1,742
Posts |
Thanks for the compliments! I mean this forum has given me a ton of help and advice, so I feel like I'm obligated to return the favor.
|
Appreciate
0
|
05-28-2011, 05:54 PM | #6 |
Brotographer
91
Rep 1,742
Posts |
Yeah, if you do it right away, you can prevent the rust from happening in the first place on the rotors, and it takes much less effort to paint right on the rotors than it does to clean them first...
|
Appreciate
0
|
05-28-2011, 06:00 PM | #7 |
Colonel
41
Rep 2,431
Posts |
Yup, Red calipers Rock with my 189s on a Jet Black E92!
__________________
My speeding isn't the problem. It's the Slow Folks ahead of me that cause accidents!
|
Appreciate
0
|
05-28-2011, 08:40 PM | #8 |
Captain
48
Rep 689
Posts |
I'm going to warn you right now, painting your calipers can be a big mistake. They are very small and look strange when painted due to their size and design. I have seen some done that look very good and other that look terrible, I guess it all depends on the prep work and paint color choice. Anyway end of lecture, best of luck to you and post pictures when you have it finished.
__________________
KING"ish" OF Changed for collins
|
Appreciate
0
|
05-29-2011, 05:19 PM | #9 |
No 55mph
1627
Rep 8,495
Posts |
Well, I powdercoated my calipers Gloss Black, with the brackets and hardware in Silver, painted my hubs silver also.
They are 1000x better looking than the rusty brakes/hubs that were there previously. I chose more subtle colors as I just wanted a clean look - nothing that calls too much attention to the brakes. Colors go great with my SGM. Take a look and decide for yourself whether it's worth it (and I haven't cleaned these in a week either ) FRONT: REAR:
__________________
F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
|
Appreciate
0
|
05-30-2011, 12:09 AM | #12 |
Major
36
Rep 1,054
Posts |
Very nice. I did mine black with them on the car. Lots of tape then I added a brembo sticker on the fronts. Everyone did double takes on them for about a year. Then I decieded to quite posing so i am going to get some BMW stickers and do them again. The 2 tone is the Sheizzey.
__________________
JB4 beta 15 ohms FSB,AEM inline filter/ CM 10, ETS fmic, ER custom made charge pipe,TSW Donnington 18's,Simitumo HTRZ3, Injen DCI, AR DPs, Forge DVs, AA SLD, Koni FSD, ZSP springs.
|
Appreciate
0
|
05-30-2011, 12:14 AM | #13 |
Banned
50
Rep 1,038
Posts |
Seriously? Painting the calipers does not do anything to performance.
|
Appreciate
0
|
06-01-2011, 04:43 AM | #14 | |
No 55mph
1627
Rep 8,495
Posts |
Quote:
I had mine powdercoated for maximum durability at the place in Export, PA that does all my powdercoating. Don't know about the G2 self-paint, but the powdercoating will stand up to setting in gasoline and won't hurt the surface if you wanted too I used hi temp matte silver spray paint for the hubs - matched the 'original' hub paint & caliper bracket pretty close...
__________________
F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
Last edited by 1QuikWS6; 06-01-2011 at 04:55 AM.. |
|
Appreciate
0
|
06-03-2011, 10:31 AM | #15 |
Lieutenant
56
Rep 522
Posts |
I painted mine with that G2 self paint(black) when I pur my rims on, and let me tell you it looks night and day! I dont see how people can spend 1,500 to 3,000 on rims and not pay attation to all that rust on the calipers and disks
|
Appreciate
0
|
06-03-2011, 10:37 AM | #16 |
Came to the N55 Darkside
1131
Rep 12,740
Posts |
|
Appreciate
0
|
06-04-2011, 03:26 PM | #18 |
Brotographer
91
Rep 1,742
Posts |
|
Appreciate
0
|
Bookmarks |
|
|