Proceed V5 CANclear cannot clear codes, in limp mode :(

Longboarder · 06-04-2011, 12:51 PM

So I have a Proceed V5 with the 12-17 autotune map. I'm getting a CEL which is strange since the CAN Clear function is supposed to clear codes automatically. When I checked the codes, I'm getting two (2ABC 10940 Charging pressure sensor, electrical; and 3100 12544 boost-pressure control, deactivation). Anyway, my user adjustables set CANclear On, and my Map settings also have CANclear set to On.

Anyone know why the Proceed cannot clear these?

Thanks.

secretsquirrel · 06-04-2011, 12:58 PM

Procede only automatically clears tuner codes. You don't want it clearing codes that show problems with your car.

s2k_335i · 06-04-2011, 12:59 PM

I received those codes when i first tested this map back in December but i did recalled after i reinstall the firmware, update the map, and reset the adaptions, i no longer receive the codes. Why not update to the new 5-10 map? You will love it, trust me.

Longboarder · 06-04-2011, 01:05 PM

Quote:

Originally Posted by secretsquirrel

Procede only automatically clears tuner codes. You don't want it clearing codes that show problems with your car.

Oh, I forgot to mention that without the Proceed or any other mods installed, there is no codes. I'm only getting the codes when I install the Proceed.

Longboarder · 06-04-2011, 01:07 PM

Quote:

Originally Posted by s2k_335i

I received those codes when i first tested this map back in December but i did recalled after i reinstall the firmware, update the map, and reset the adaptions, i no longer receive the codes. Why not update to the new 5-10 map? You will love it, trust me.

I did reinstall firmware and the the stock 12-17 6AT map like 5 times. No luck as the codes keep coming back and forces the car into limp mode.

s2k_335i · 06-04-2011, 01:14 PM

Have you update your DME lately? If so, try to new 5-10 map.

s2k_335i · 06-04-2011, 01:15 PM

or the older map 3-30, which is more stable.

Longboarder · 06-04-2011, 01:23 PM

Quote:

Originally Posted by s2k_335i

or the older map 3-30, which is more stable.

Thanks for the suggestion. I just updated to the 5-10 firmware and maps. I then cleared all codes manually. Turned the car on, no codes showing in the Channel Log. Then 10 seconds later, the CEL reappears and the same codes are shown in the Channel Log. No matter what I do, these codes and Limp Mode come on.

When I clear the codes and disconnect the Proceed (bring the car back to stock), the codes never appear so I know it's the Proceed. Weird.

enrita · 06-04-2011, 01:26 PM

Seems you have some faulty wiring maybe in the proceed.

Longboarder · 06-04-2011, 01:33 PM

Quote:

Originally Posted by enrita

Seems you have some faulty wiring maybe in the proceed.

Are you saying you think it was installed incorrectly or the Proceed itself is faulty? When it was reinstalled yesterday it was working fine for about an hour until the codes returned this morning, so it would seem that is unlikely that the install was bad, however I can check on this.

enrita · 06-04-2011, 01:43 PM

Quote:

Originally Posted by Longboarder

Are you saying you think it was installed incorrectly or the Proceed itself is faulty? When it was reinstalled yesterday it was working fine for about an hour until the codes returned this morning, so it would seem that is unlikely that the install was bad, however I can check on this.

Well the code is about a sensor so the signal to it that probably goes through the proceed might be interrupted. I would contact vishnu support about this. You might need to send it in .

s2k_335i · 06-04-2011, 01:50 PM

It's better to contact the Vishnu team and have them troubleshoot this issue for you. Or they might send you the new map to see if this issue will resolve.

enrita · 06-04-2011, 01:53 PM

Is probably not map related otherwise 50 other people would have the same issue

youngbuck · 06-08-2011, 01:25 PM

I'm having the exact same issue, been happening for a couple months since the DIC map release.

Anything get resolved from the OP?

Best

Longboarder · 06-08-2011, 08:44 PM

Quote:

Originally Posted by youngbuck

I'm having the exact same issue, been happening for a couple months since the DIC map release.

Anything get resolved from the OP?

Best

No, the Proceed was shipped back yesterday so Vishnu could diagnose the unit. My car is back to stock and I have no codes.

Call Robert at Vishnu, he is good at remote diagnostics. I just think in this case, the problem may be the hardware. It happened to me before a few years back with V1.

06-04-2011, 12:51 PM	#1
Longboarder Major General 3505 Rep 6,785 Posts Drives: 2016 BMW i8 Join Date: Dec 2006 Location: Monarch Beach iTrader: (1) Garage List 2012 BMW e92 M3 [0.00] 2021 BMW X5M [10.00] 2015 Porsche 991 Tu ... [10.00] 2015 Porsche 991 GT3 [10.00]	Proceed V5 CANclear cannot clear codes, in limp mode :( So I have a Proceed V5 with the 12-17 autotune map. I'm getting a CEL which is strange since the CAN Clear function is supposed to clear codes automatically. When I checked the codes, I'm getting two (2ABC 10940 Charging pressure sensor, electrical; and 3100 12544 boost-pressure control, deactivation). Anyway, my user adjustables set CANclear On, and my Map settings also have CANclear set to On. Anyone know why the Proceed cannot clear these? Thanks. __________________ Current BMWs: 2022 X5 40i, 2016 X5 50i 2015 Porsche 991 Turbo S 1979 Porsche 911 Turbo (930) a couple others IG: longboarder949; YouTube: https://www.youtube.com/channel/UCT1...eoFBszPIK0gf9w
	Appreciate 0 Tweet Quote

06-04-2011, 12:58 PM	#2
secretsquirrel Colonel 202 Rep 2,347 Posts Drives: f80 Join Date: Dec 2010 Location: Far North Dallas iTrader: (2)	Procede only automatically clears tuner codes. You don't want it clearing codes that show problems with your car.
	Appreciate 0 Quote

06-04-2011, 12:59 PM	#3
s2k_335i This is it!! 18 Rep 672 Posts Drives: FBO 335i without meth Join Date: Jul 2010 Location: Land of Freedom iTrader: (1)	I received those codes when i first tested this map back in December but i did recalled after i reinstall the firmware, update the map, and reset the adaptions, i no longer receive the codes. Why not update to the new 5-10 map? You will love it, trust me. __________________ DFW, TX. Current: 08' Cayenne GTS, 14' Boxster S, 12' CBR 1000', 04' Bayliner 2556 Sold: 2010 A4, 2008 335i, 2007 335i, 2006 M3, 2006 S2000, 1990 NSX, 1991 300zx, 1992 Supra, 1996 Prelude, 1981 CRX, 1980 Mustang.
	Appreciate 0 Quote

06-04-2011, 01:14 PM	#6
s2k_335i This is it!! 18 Rep 672 Posts Drives: FBO 335i without meth Join Date: Jul 2010 Location: Land of Freedom iTrader: (1)	Have you update your DME lately? If so, try to new 5-10 map. __________________ DFW, TX. Current: 08' Cayenne GTS, 14' Boxster S, 12' CBR 1000', 04' Bayliner 2556 Sold: 2010 A4, 2008 335i, 2007 335i, 2006 M3, 2006 S2000, 1990 NSX, 1991 300zx, 1992 Supra, 1996 Prelude, 1981 CRX, 1980 Mustang.
	Appreciate 0 Quote

06-04-2011, 01:15 PM	#7
s2k_335i This is it!! 18 Rep 672 Posts Drives: FBO 335i without meth Join Date: Jul 2010 Location: Land of Freedom iTrader: (1)	or the older map 3-30, which is more stable. __________________ DFW, TX. Current: 08' Cayenne GTS, 14' Boxster S, 12' CBR 1000', 04' Bayliner 2556 Sold: 2010 A4, 2008 335i, 2007 335i, 2006 M3, 2006 S2000, 1990 NSX, 1991 300zx, 1992 Supra, 1996 Prelude, 1981 CRX, 1980 Mustang.
	Appreciate 0 Quote

06-04-2011, 01:26 PM	#9
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Seems you have some faulty wiring maybe in the proceed. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

06-04-2011, 01:50 PM	#12
s2k_335i This is it!! 18 Rep 672 Posts Drives: FBO 335i without meth Join Date: Jul 2010 Location: Land of Freedom iTrader: (1)	It's better to contact the Vishnu team and have them troubleshoot this issue for you. Or they might send you the new map to see if this issue will resolve. __________________ DFW, TX. Current: 08' Cayenne GTS, 14' Boxster S, 12' CBR 1000', 04' Bayliner 2556 Sold: 2010 A4, 2008 335i, 2007 335i, 2006 M3, 2006 S2000, 1990 NSX, 1991 300zx, 1992 Supra, 1996 Prelude, 1981 CRX, 1980 Mustang.
	Appreciate 0 Quote

06-04-2011, 01:53 PM	#13
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Is probably not map related otherwise 50 other people would have the same issue __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

06-08-2011, 01:25 PM	#14
youngbuck Private First Class 9 Rep 178 Posts Drives: e92 M3 ZCP Join Date: Nov 2007 Location: Emerald City, WA iTrader: (10)	I'm having the exact same issue, been happening for a couple months since the DIC map release. Anything get resolved from the OP? Best __________________
	Appreciate 0 Quote