AR Downpipes Swap.. Help car vibrating much more than before..

djdownfawl · 06-23-2011, 12:49 PM

Please help me..
I recently swapped the downpipes to AR design downpipes and the car is vibrating much more at still and its not pleasant..
How can i fix this issue?

Thanks

Jeff@TopGearSolutions · 06-23-2011, 01:07 PM

What kind of tune?

Reset adaptations perhaps

NiVeDh · 06-23-2011, 01:14 PM

Check to see if they're touching each other or any other part of the underbody.

ar design · 06-23-2011, 01:26 PM

Quote:

Originally Posted by NiVeDh

Check to see if they're touching each other or any other part of the underbody.

This. If you have any issues, always a good idea to call the manufacturer. They are usually able to offer the best support.

Mike@N54Tuning.com · 06-23-2011, 01:34 PM

Quote:

Originally Posted by ar design

This. If you have any issues, always a good idea to call the manufacturer. They are usually able to offer the best support.

+1

Its a common install error when the shop/person doesn't rotate them properly to ensure clearance.

Mike

R1000K3 · 06-23-2011, 01:39 PM

Quote:

Originally Posted by Jeff@topgearsolutions

What kind of tune?

Reset adaptations perhaps

Is this a reply to OP's mechanical issues

s2k_335i · 06-23-2011, 02:05 PM

Quote:

Originally Posted by R1000K3

Is this a reply to OP's mechanical issues

lol

Bakeme521 · 06-23-2011, 02:44 PM

Quote:

Originally Posted by R1000K3

Is this a reply to OP's mechanical issues

Yes it is actually, resetting your adaptations with procede can help with a shaky idle. If you can,t hear the pipes hitting something I doubt that's the problem.

tibra1 · 06-23-2011, 03:18 PM

Quote:

Originally Posted by ar design

This. If you have any issues, always a good idea to call the manufacturer. They are usually able to offer the best support.

+2

Tiago@VRSF · 06-23-2011, 04:22 PM

They aren't clocked correctly or they installed the o2's in the wrong order which will cause the idle and driveability to goto shit.

Syndicategt · 06-23-2011, 04:24 PM

Stop driving over the rumble strips or take your iPhone off vibrate.

Jeff@TopGearSolutions · 06-23-2011, 09:05 PM

Quote:

Originally Posted by R1000K3

Is this a reply to OP's mechanical issues

Quote:

Originally Posted by s2k_335i

lol

Quote:

Originally Posted by Bakeme521

Yes it is actually, resetting your adaptations with procede can help with a shaky idle. If you can,t hear the pipes hitting something I doubt that's the problem.

That was what I was referring to, the OP never mentioned he heard metal on metal noise otherwise I would say there is clearly an install problem. He just said vibrating which would mean possibly a rough idle which could be related to other hardware like HPFP or injectors too.

creaminz · 06-24-2011, 12:41 AM

Went through 2 sets of ar dps and never had any rattling, vibrating issue

badass335 · 06-24-2011, 02:55 AM

i actually had this when i had my MS catless ones installed. After a week, went back and had car lifted to see what was rubbing. Turns out, there was a very slight rub. You could see the metal scrap. The installers loosened and adjusted and all has been well since. Mine was funny. If i turned the wheel to the right slight and tapped the brakes to move the car say an inch, the vibrating would go hence why i figured there was a rub. The engine would move slight and exhaust wouldnt rub anymore. Take it back to installers.

djdownfawl · 06-28-2011, 03:32 PM

When I turn off the car after coming to a stop, something hits something underbody.

Also at first start up there is a noise like whissss and it goes away after a 2 mins.

Hate. it..

ar design · 06-28-2011, 04:22 PM

Sounds like an alignment issue - who installed them?

djdownfawl · 06-29-2011, 10:16 AM

Just a local mechanic....

djdownfawl · 06-30-2011, 01:20 PM

Where should i get it fixed from?

ar design · 06-30-2011, 01:27 PM

AK Motorwork, Camber-Toe, both great shops.

06-23-2011, 12:49 PM	#1
djdownfawl Private 7 Rep 69 Posts Drives: BMW 335xi Join Date: Mar 2011 Location: NJ iTrader: (1)	AR Downpipes Swap.. Help car vibrating much more than before.. Please help me.. I recently swapped the downpipes to AR design downpipes and the car is vibrating much more at still and its not pleasant.. How can i fix this issue? Thanks
	Appreciate 0 Tweet Quote

06-23-2011, 01:07 PM	#2
Jeff@TopGearSolutions 3482 Rep 79,210 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	What kind of tune? Reset adaptations perhaps
	Appreciate 0 Quote

06-23-2011, 01:14 PM	#3
NiVeDh Major General 432 Rep 8,003 Posts Drives: '08 E90 335i, '99 E36 M3 Join Date: Apr 2009 Location: Houston, TX & Atlanta, GA iTrader: (132) Garage List 2008 BMW 335i Sedan [8.66]	Check to see if they're touching each other or any other part of the underbody.
	Appreciate 0 Quote

06-23-2011, 04:22 PM	#10
Tiago@VRSF 2126 Rep 43,349 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	They aren't clocked correctly or they installed the o2's in the wrong order which will cause the idle and driveability to goto shit.
	Appreciate 0 Quote

06-23-2011, 04:24 PM	#11
Syndicategt Brigadier General 164 Rep 3,730 Posts Drives: 335i Join Date: Sep 2009 Location: Nor Cal iTrader: (11)	Stop driving over the rumble strips or take your iPhone off vibrate. __________________ 2008 BMW 335i e90 - Sold - Rob Beck Turbos / PROcede V5 / Aquamist HFS-4 / AR Downpipes / AE Exhaust / ER Comp FMIC / ER CP / TiAL BOV / Custom Intake / RPI Scoops / Quaife LSD / Swift-Koni Coilovers / DSS HS / Morr VS8.2 Sig Black / Michelin PSS / P3 Boost Guage / M3 body / M3 steering wheel / Adam's Rotors / Hawk HPS / SS lines /
	Appreciate 0 Quote

06-24-2011, 12:41 AM	#13
creaminz Major General 564 Rep 7,701 Posts Drives: E90 LCI Join Date: Sep 2005 Location: So. Cal iTrader: (33)	Went through 2 sets of ar dps and never had any rattling, vibrating issue
	Appreciate 0 Quote

06-24-2011, 02:55 AM	#14
badass335 Lieutenant Colonel 119 Rep 1,948 Posts Drives: 2017 540i Xdrive Join Date: Jul 2007 Location: Surrey, BC iTrader: (10)	i actually had this when i had my MS catless ones installed. After a week, went back and had car lifted to see what was rubbing. Turns out, there was a very slight rub. You could see the metal scrap. The installers loosened and adjusted and all has been well since. Mine was funny. If i turned the wheel to the right slight and tapped the brakes to move the car say an inch, the vibrating would go hence why i figured there was a rub. The engine would move slight and exhaust wouldnt rub anymore. Take it back to installers.
	Appreciate 0 Quote

06-28-2011, 03:32 PM	#15
djdownfawl Private 7 Rep 69 Posts Drives: BMW 335xi Join Date: Mar 2011 Location: NJ iTrader: (1)	When I turn off the car after coming to a stop, something hits something underbody. Also at first start up there is a noise like whissss and it goes away after a 2 mins. Hate. it..
	Appreciate 0 Quote

06-28-2011, 04:22 PM	#16
ar design 304 Rep 4,408 Posts Drives: 04 M3 Join Date: Jan 2008 Location: Denver, CO iTrader: (9)	Sounds like an alignment issue - who installed them?
	Appreciate 0 Quote

06-29-2011, 10:16 AM	#17
djdownfawl Private 7 Rep 69 Posts Drives: BMW 335xi Join Date: Mar 2011 Location: NJ iTrader: (1)	Just a local mechanic....
	Appreciate 0 Quote

06-30-2011, 01:20 PM	#18
djdownfawl Private 7 Rep 69 Posts Drives: BMW 335xi Join Date: Mar 2011 Location: NJ iTrader: (1)	Where should i get it fixed from?
	Appreciate 0 Quote

06-30-2011, 01:27 PM	#19
ar design 304 Rep 4,408 Posts Drives: 04 M3 Join Date: Jan 2008 Location: Denver, CO iTrader: (9)	AK Motorwork, Camber-Toe, both great shops. __________________ -Critter
	Appreciate 0 Quote