PWM Meth on-line info (kit details, instructions, etc,.)

MF80 · 07-02-2011, 11:02 PM

Let's us know how it performs with this meth kit, Darren. I wanna get one too later.

creaminz · 07-03-2011, 05:03 AM

Quote:

Originally Posted by JsTech

Let's us know how it performs with this meth kit, Darren. I wanna get one too later.

Car pulls very good! I was doing some 3rd gear pulls on the freeway, damn! My car has never pulled this good to be honest. No hiccups, no ses, no lag, no nada nothing. Im going to MD on thursday to dyno.

DaFish · 07-03-2011, 10:38 AM

Quote:

Originally Posted by scottp999

Package came today. I only wish I felt good enough to work on the install.

Pay someone.... and get that in.

DaFish · 07-03-2011, 10:41 AM

Quote:

Originally Posted by creaminz

Car pulls very good! I was doing some 3rd gear pulls on the freeway, damn! My car has never pulled this good to be honest. No hiccups, no ses, no lag, no nada nothing. Im going to MD on thursday to dyno.

oh man.... I can't wait to get mine. I hope to get it this week coming. I just found out my Wavetrac is coming this week too !!!

MF80 · 07-03-2011, 01:38 PM

Quote:

Originally Posted by creaminz

Car pulls very good! I was doing some 3rd gear pulls on the freeway, damn! My car has never pulled this good to be honest. No hiccups, no ses, no lag, no nada nothing. Im going to MD on thursday to dyno.

Sounds good! What boost are you running with and without meth kit?

OpenFlash · 07-03-2011, 02:11 PM

I just updated the instructions with suggested starting points for boost/ignition correction when running on meth. Basically 16.5psi (65%) and 0% ignition correction. You will need to raise max boost as well so you trip the overboost code on the Procede.

OpenFlash · 07-03-2011, 02:15 PM

Here's the default methanol table for stock turbo maps btw:

DaFish · 07-03-2011, 03:56 PM

Quote:

Originally Posted by shiv@vishnu

I just updated the instructions with suggested starting points for boost/ignition correction when running on meth. Basically 16.5psi (65%) and 0% ignition correction. You will need to raise max boost as well so you trip the overboost code on the Procede.

Shiv you have autotuning ON in that pic.

Are u running 6-14 maps?

When I get my pwm meth kit can I run auto tuning enabled on 6-14?

creaminz · 07-03-2011, 04:05 PM

Nice.
Shiv any suggested settings for dyno run? FBO + Meth + 100oct
And besides RB turbos, other turbo upgrades use stock turbo maps correct?

OpenFlash · 07-03-2011, 04:20 PM

Quote:

Originally Posted by DaFish

Shiv you have autotuning ON in that pic.

Are u running 6-14 maps?

When I get my pwm meth kit can I run auto tuning enabled on 6-14?

I am running 6-14 map/fw in that screenshot. Autotuning actually works in methanol mode but I'd rather people keep it off for now. I just reloaded a new screenshot in the instructions with it off. Thanks for the heads up.

Tzu · 07-03-2011, 10:39 PM

Any way to adjust those fuzzy logic tables ourselves?

scottp999 · 07-04-2011, 09:32 AM

Shiv - your photobucket screen shots are gone.

scottp999 · 07-04-2011, 09:55 AM

Also, I bought the PWM kit, and have your old PnP kit installed. When I am un-installing the original PnP kit, do I just completely remove that map switching relay from the procede harness that has the purple wire running to it for meth flow??? I assume it can go, but would like to make sure.

Pictured in step 9 of the old kits instructions here: http://www.e90post.com/forums/showthread.php?t=314526

07-02-2011, 11:02 PM	#23
MF80 Captain 45 Rep 809 Posts Drives: AW 2008 E92 335i Join Date: Dec 2009 Location: Area51 iTrader: (10)	Let's us know how it performs with this meth kit, Darren. I wanna get one too later.
	Appreciate 0 Quote

07-03-2011, 02:11 PM	#28
OpenFlash 1809 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	I just updated the instructions with suggested starting points for boost/ignition correction when running on meth. Basically 16.5psi (65%) and 0% ignition correction. You will need to raise max boost as well so you trip the overboost code on the Procede. Last edited by OpenFlash; 07-03-2011 at 02:20 PM..
	Appreciate 0 Quote

07-03-2011, 02:15 PM	#29
OpenFlash 1809 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Here's the default methanol table for stock turbo maps btw:
	Appreciate 0 Quote

07-03-2011, 04:05 PM	#31
creaminz Major General 556 Rep 7,701 Posts Drives: E90 LCI Join Date: Sep 2005 Location: So. Cal iTrader: (33)	Nice. Shiv any suggested settings for dyno run? FBO + Meth + 100oct And besides RB turbos, other turbo upgrades use stock turbo maps correct?
	Appreciate 0 Quote

07-03-2011, 10:39 PM	#33
Tzu Lieutenant Colonel 29 Rep 1,551 Posts Drives: 335i Join Date: Jun 2010 Location: Toronto iTrader: (1)	Any way to adjust those fuzzy logic tables ourselves?
	Appreciate 0 Quote

07-04-2011, 09:32 AM	#34
scottp999 Brigadier General 136 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	Shiv - your photobucket screen shots are gone.
	Appreciate 0 Quote

07-04-2011, 09:55 AM	#35
scottp999 Brigadier General 136 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	Also, I bought the PWM kit, and have your old PnP kit installed. When I am un-installing the original PnP kit, do I just completely remove that map switching relay from the procede harness that has the purple wire running to it for meth flow??? I assume it can go, but would like to make sure. Pictured in step 9 of the old kits instructions here: http://www.e90post.com/forums/showthread.php?t=314526
	Appreciate 0 Quote