[megaman416]

I recently bought a BMW 135/335 I CMGS FS kit and I'm getting ready to set it up with my Procede V5 (6-24). I saw the video which is straight forward for making the CMGS work with the Procede. My quesiton is around flow settings. On the CMGS if I want full flow at 9-10 psi I set the maximum to this value, what would I set the minimum to the same value? I get the traditional kits that have a boost pressure switch with one setting for max flow.

Also, how much boost is safe to run with a 50/50 mix and CM10? What other settings can I modify to take advantage of in the command center on Map 2. I'm running the latest 6-24 maps.

Thanks guys.

[Tzu]

I have PWM kit on order at the moment. If you are running a PWM setup, you set the trip boost a few PSI earlier, maybe 6psi, if I understand correctly.

[Jeff@TopGearSolutions]

Start at 7, full flow by 9-10.

Normal meth users run anywhere between 16-18 PSI depending on mods and octane.

[megaman416]

Originally Posted by Jeff@topgearsolutions

Start at 7, full flow by 9-10.

Normal meth users run anywhere between 16-18 PSI depending on mods and octane.

Awesome thanks Jeff. I'll be ordering an upgraded Solenoid and some other goodies from you very shortly.