[scanboy]

Originally Posted by heartpumper

Thanks for posting what you have done i was wondering if you could post which module you looked in and the "terminology" to look at to change it to aktiv or nicht_aktiv

I c, here they are:

1. CAS - KOMFORTSCHLIESSUNG_FB for Windows up on holding lock button on remote.
2. NFRM - SPIEGEL_KOMFORT_EINKLAPP for Side mirror folding on holding lock button on remote.
3. NFRM - SIDEMARKER_US for Corner delete (side marker/signal light off when headlights on)

For corner delete, I don't have SIDEMARKER_US exactly, I think mine has 2 extra characters after US, something like SIDEMARKER_US_NF.

[moaad]

a very good DIY

Thanks xxxjecxxx

[wchoy]

Originally Posted by scanboy

I c, here they are:

1. CAS - KOMFORTSCHLIESSUNG_FB for Windows up on holding lock button on remote.
2. NFRM - SPIEGEL_KOMFORT_EINKLAPP for Side mirror folding on holding lock button on remote.
3. NFRM - SIDEMARKER_US for Corner delete (side marker/signal light off when headlights on)

For corner delete, I don't have SIDEMARKER_US exactly, I think mine has 2 extra characters after US, something like SIDEMARKER_US_NF.

what year is your car?

[scanboy]

Originally Posted by wchoy

what year is your car?

07

[MrSkinny]

any successful 07 e92s?

[fdriller9]

Originally Posted by scanboy

I'm using the same ebay cable that you posted earlier :
http://cgi.ebay.com/ebaymotors/_W0QQ...#ht_7117wt_981

The software that I was using is the same version as what's available in this thread (at least for NCS Expert) but I find this thread a lot easier (specially the software installation) to follow for a beginner.

What I've successfully done so far:
1. Windows up on holding lock button on remote.
2. Side mirror folding on holding lock button on remote.
3. Corner delete (side marker/signal light off when headlights on)

I really want AE as DRL, but I was told it's not possible.

If you can't code them as DRLs you can wire them to your cigg lighter with a diode in between like I did...there is a DIY with the specs on the diode in the DIY forum. I have had this setup for about 3 months now....no problems so far....Knock on wood.

There is also a DIY that wires them to the ECU...but I have just come across this and don't know much about it.

[scanboy]

Originally Posted by *********

If you can't code them as DRLs you can wire them to your cigg lighter with a diode in between like I did...there is a DIY with the specs on the diode in the DIY forum. I have had this setup for about 3 months now....no problems so far....Knock on wood.

There is also a DIY that wires them to the ECU...but I have just come across this and don't know much about it.

Yeah I saw the cigg one, I thought that's what I'm going to do if the coding is not possible. Coding is cleaner if it is possible, so I thought I explored that first.

[fdriller9]

Originally Posted by scanboy

Yeah I saw the cigg one, I thought that's what I'm going to do if the coding is not possible. Coding is cleaner if it is possible, so I thought I explored that first.

Ohh definitely. I was looking to do that as well but I haven't gotten my cable yet to explore.

[bugsandry]

Ok an update..

I manage to open the INPALOAD.exe file on my Win XP laptop after putting all the files in c:\ directory and setting the path to c:\ediabas\bin.

Now the problem is when I plug in my cable to the car and press start button and run INPALOAD, I didn't see the black dot confirming battery and Iginition ON

I am using an ELM 327 interface (r232) with USB port at the end of the cable (My friend uses this interface on his e46) and it supports OBD II protocols. Since this is a USB, the advanced option for the port is different and I cannot assign "use fifo uffers" or setting the receive and transmit buffers to "8" as per instructions.

I am guessing that's the reason why the INAPALOAD process cannot detect the car?

Anyone can shed some light?

[wchoy]

any one find a good cable for 08 and later e90?

[MrSkinny]

Originally Posted by wchoy

any one find a good cable for 08 and later e90?

just join in on the gb

[JonLerd]

[QUOTE[/QUOTE]


i got the same error but can connect to the alarm module just fine. Anyone seen this?

[Robben@ltbmw]

Originally Posted by scanboy

I c, here they are:

1. CAS - KOMFORTSCHLIESSUNG_FB for Windows up on holding lock button on remote.
2. NFRM - SPIEGEL_KOMFORT_EINKLAPP for Side mirror folding on holding lock button on remote.
3. NFRM - SIDEMARKER_US for Corner delete (side marker/signal light off when headlights on)

For corner delete, I don't have SIDEMARKER_US exactly, I think mine has 2 extra characters after US, something like SIDEMARKER_US_NF.

I have 07 e92, is your e90 or e92? I changed the sidemarker_US to not active but corner delete still doesn't work. may be it is indeed a bad cable.. I will update once I can find a new cable to borrow.
scanboy: i see you're local to me, do you mind if I borrow the cable?

[Whitevdub]

is there a way to code off the 3 orange led's that come on with the e90 lci bi-xenon headlights?

[Robben@ltbmw]

Originally Posted by JonLerd

i got the same error but can connect to the alarm module just fine. Anyone seen this?

make sure you are opening up INPA.EXE (there are several INPA you can open up, some include loader and editor. only the .exe file will work)

[bugsandry]

Originally Posted by cbbplanet

make sure you are opening up INPA.EXE (there are several INPA you can open up, some include loader and editor. only the .exe file will work)

The instruction told us to load INPALOAD.exe when we first run it ? So it should be INPA.exe then?

[Robben@ltbmw]

Originally Posted by bugsandry

The instruction told us to load INPALOAD.exe when we first run it ? So it should be INPA.exe then?

sry inpaload.exe is correct. I don't have the DIY in front of me so I was just recalling from my memory. Main point is make sure its the .exe program, because there are several INPAloader in there I remember. All of them are executable but under each description, i think only one of them will work. I forgot the name right now but I will go back home and look at my folders. If you're in a rush of doing it right now, try all the inpaloader executables.

[scanboy]

Originally Posted by cbbplanet

I have 07 e92, is your e90 or e92? I changed the sidemarker_US to not active but corner delete still doesn't work. may be it is indeed a bad cable.. I will update once I can find a new cable to borrow.
scanboy: i see you're local to me, do you mind if I borrow the cable?

yeah, I just pm you, we can work something out. btw, mine is 07 e90.

[Dr. G]

What is the recommended wire for 07 e92?

Just looking to use the DIY and code the digital speedo, since im in the US with a KM/H only speedo

[JonLerd]

Originally Posted by cbbplanet

I have 07 e92, is your e90 or e92? I changed the sidemarker_US to not active but corner delete still doesn't work. may be it is indeed a bad cable.. I will update once I can find a new cable to borrow.
scanboy: i see you're local to me, do you mind if I borrow the cable?

hey i got a cable you can try also which i got at one stop electronics.com hit me up via pm if you havent tried that cable yet.

-Jon

[JonLerd]

any socal guys LA/OC area want to meet up to do a group coding session? With the different versions and different cables im sure we can make some good progress.

[Greenkirby21]

would this work on a 1 series?