[Andrey@ModMyEuro.com]

Originally Posted by mashimarho

Holy crap that's soon!

Please PM me so we can arrange.

I think you'll have to PM everyone individually. I wasn't notified on any of this, so I'm sure others have no clue too..

Hey Brotha,
Ye I'm thinking your right thanks for the heads up. Ok to make it easier for everybody, I will send out a mass PM tonight to make sure that people who dont regularly check the thread are informed and probably extend the time by a day to give people some more time to get their payments in. For people who are on the thread please proceed as instructed. For individual cases we can discuss over PM

Andrey

[1QuikWS6]

Andrey - PM'd you

[mashimarho]

[1QuikWS6]

Heads up guys & stay tuned - talked with Andrey today & he is expecting to release pics of the new Design CF spoiler for the E92 - they are planning on going with an Arkym/CPS Style instead of the (2) holes as in the E90 version

The lip is going to be exactly as pictured in the e90 thread in terms of look with one exception. Instead of the two hollow holes on the e90 lip it is going to be a arkym/cps style where it meets the bumper as we feel that looks amazing on the couple body style. I will update the thread tonight with a product pic of the lip which were having made.

This should delight mashimarho to no end, as I think he had one on his car some time ago - unless he still wants to go with the double lip version

[_ink]

Originally Posted by 1QuikWS6

Heads up guys & stay tuned - talked with Andrey today & he is expecting to release pics of the new Design CF spoiler for the E92 - they are planning on going with an Arkym/CPS Style instead of the (2) holes as in the E90 version

This should delight mashimarho to no end, as I think he had one on his car some time ago - unless he still wants to go with the double lip version

Would a vote or feedback on what your customers want be a better way of conducting your final design outcome?

[1QuikWS6]

Originally Posted by _ink

Would a vote or feedback on what your customers want be a better way of conducting your final design outcome?

Pretty sure that's why he was going to post pics - to show what they are thinking of doing for review

Obviously no matter what style/design they go with, not everyone is gonna like it.

I know what style he's talking about & it may just look better than those (2) holes (all though I kinda like that design also)

[Taran.J]

Originally Posted by 1QuikWS6

Pretty sure that's why he was going to post pics - to show what they are thinking of doing for review

Obviously no matter what style/design they go with, not everyone is gonna like it.

I know what style he's talking about & it may just look better than those (2) holes (all though I kinda like that design also)

I'd post the pic but I don't want to take the joy away from Andrey lol.

But personally this design is going to suit the E92 better because of the more fluent design as the headlights are more rounded as well.

I voted for this lip personally if anybody has any gripes

[styles50]

finally the wait is over.

Sent payment.

[Blindside_137]

Hold on a second.... Changing the lip design after we've all committed?

Not too happy. I really want the slek style.

Won't send payment until this is cleared up.

[Taran.J]

THIS IS THE LIP IN QUESTION, PLEASE GIVE ALL FEEDBACK ASAP EVERYBODY

-Aero holes
-Thinned out sides to give it a more rounded and sleeker look for the E92/93
-Weighs less than the E90 CF Lip
-Also is lowered car friendly since it will just flatten out the entire bottom baseline
-Based off the ARKYM CPS

Taran, MME

[rennzport]

I think this lip is perfect for e92.. Seems less bulky than the e90 version, which is good.
I also like that its more "lowered car friendly"

[Game]

Originally Posted by Taran.J

THIS IS THE LIP IN QUESTION, PLEASE GIVE ALL FEEDBACK ASAP EVERYBODY

-Aero holes
-Thinned out sides to give it a more rounded and sleeker look for the E92/93
-Weighs less than the E90 CF Lip
-Also is lowered car friendly since it will just flatten out the entire bottom baseline
-Based off the ARKYM CPS

Taran, MME

I like it.

Anyone have any solid pics of the slek lip for comparison?

[lito]

I vote for the Slek style lip

[Underground6t9]

Lip looks sharp

[1QuikWS6]

New design is not bad - but as I am XI stance the ground clearance is not an issue for me.

Don't think I'm really feeling the vertical wall going from bumper to lip, and the lip itself is much thinner and extended out further than the other as on E90 - looks kinda like a shelf. I can see something bad happening to that driving the winter roads - especially when they run out of salt & start throwin' down rocks instead for grip

I liked the way the other lip did not protrude as much from the bumper, was more flowing and sort of melted/merged into the bumper itself along the top edges.

The other design hugged the bumper closer at the extreme corners while this one extends out much further around the corners - which makes it prone to damage if you pull in slightly too far in an angled parking spot against a curb.

• Is there going to be a choice between this new design and the old, or is it one or the other?
  
• Since this bumper was made from an actual 1M bumper bottom half, does that mean that any spoiler made for OEM 1M front will fit perfectly?

[lito]

"Is there going to be a choice between this new design and the old, or is it one or the other?
Since this bumper was made from an actual 1M bumper bottom half, does that mean that any spoiler made for OEM 1M front will fit perfectly?"

This! If i can get the Slek style lip, I will to cancel the lip.

[DoctoRx]

Payment Sent. Looking forward to final product!

[Taran.J]

Originally Posted by lito

"Is there going to be a choice between this new design and the old, or is it one or the other?
Since this bumper was made from an actual 1M bumper bottom half, does that mean that any spoiler made for OEM 1M front will fit perfectly?"

This! If i can get the Slek style lip, I will to cancel the lip.

So what we have to wait for is the matching of the corners to make sure the lip is going to sit perfect. As the e90's have to be tightened up the E92's are wider so they will be off by at min an inch to match up by the fenders. But what I'm trying to do is have it match since we didn't have to modify the 1M bottom on the E90 at all. So if we could do this for the E92 then both lips will be interchangeable and you can buy the e90 lip. But we need to wait for a e92 test bumper so we can make sure for everybody.

Hope everybody can understand that from a manufacturing POV.

Taran

[N54 TuNeR]

Originally Posted by Taran.J

THIS IS THE LIP IN QUESTION, PLEASE GIVE ALL FEEDBACK ASAP EVERYBODY

-Aero holes
-Thinned out sides to give it a more rounded and sleeker look for the E92/93
-Weighs less than the E90 CF Lip
-Also is lowered car friendly since it will just flatten out the entire bottom baseline
-Based off the ARKYM CPS

Taran, MME

Is this what it's gonna look like for the E90's?

[Taran.J]

Originally Posted by N54 TuNeR

Is this what it's gonna look like for the E90's?

No this is for the E92 only. The E90 will be off the Slek Design

[1QuikWS6]

So, to TaranJ or Andrey

Is the new design cf lip for E92 as shown above definitely what will be supplied?

Just need to know before sending payment so I know whether to still get the lip or not...

[Taran.J]

Originally Posted by 1QuikWS6

So, to TaranJ or Andrey

Is the new design cf lip for E92 as shown above definitely what will be supplied?

Just need to know before sending payment so I know whether to still get the lip or not...

For what is being said and having more than half of the GB buyers tell us they want something sleeker it is looking this way.

But we will be sending out our E90 Lip to be tested or have them send us a lip so if they are interchangeable then we will let you choose out of which one you would like. But we have to wait for their production to start to actually get it squared away on the sides.