[ASBSECU E93]

Originally Posted by dmanb2b

Sweet, can you share how you loaded on phone...can't find it in the App Store

I literally downloaded it directly from the App store...

Try 'OBD Fusion'

[32valves]

Originally Posted by BB_cuda

32valves, who makes that M3 replica? I noticed the rounded headlight washer heads. All of the M3 reps I've looked at had no provision for washers (for the 4 door sedan type).

I've toyed with idea of buying the one that has no holes and then use my other bumper as a reference for cutting the same holes as the M-sport bumper. I hadn't got the guts up yet to cut the $300 bumper yet. I would make a cardboard template and then measure off a known reference. Your's looks like same space gray one I need. Nice job!

I got it on flea-bay for less than $300, it was on sale and has no fog lights. But it does come with ducts. My oem sprayers were disconnected cause the actuators kept leaking so I ordered this bumper with them cause they are fixed.
The seller is (oemdirect).

[32valves]

Originally Posted by JOHNNYBRAVO1

Bumber looks well built also. I actually think the headlight washers are a waste. I had to replace my headlight sprayers twice. I do like how there built in. Is the Bumber ABS plastic or fiberglass? Good job looks great🤘🤘🤘

abs plastic...

[dmanb2b]

Originally Posted by ASBSECU E93

I literally downloaded it directly from the App store...

Try 'OBD Fusion'

Thank you...I found OBD Fusion, but never realized it was the same as Torque Pro.

[OR335d]

Originally Posted by dmanb2b

Thank you...I found OBD Fusion, but never realized it was the same as Torque Pro.

ObD Fusion is not the same as Torque Pro. Different developers, and 100x as many Torque Pro downloads as OBD Fusion. Please put this on a different thread to discuss further.

[ASBSECU E93]

Originally Posted by OR335d

ObD Fusion is not the same as Torque Pro. Different developers, and 100x as many Torque Pro downloads as OBD Fusion. Please put this on a different thread to discuss further.

Googled Torque Pro app for iPhone....this is what the App Store reflects.

[dmanb2b]

Originally Posted by OR335d

Anyone recommend an app that uses the Carly WIFI module like Torque Pro does with bluetooth? I'm an Iphone user. Might need to PM me as this could be considered commercial endorsement of a product.

Originally Posted by OR335d

ObD Fusion is not the same as Torque Pro. Different developers, and 100x as many Torque Pro downloads as OBD Fusion. Please put this on a different thread to discuss further.

Hey, just to point out to you that you are the one that started this off-topic discussion.

I won't start a new thread, but thanks for clarifying that Torque Pro is not the same as OBD Fusion. Feel free to start a new thread if you feel it's still necessary to answer your original question.

[OR335d]

Originally Posted by dmanb2b

Hey, just to point out to you that you are the one that started this off-topic discussion.

I won't start a new thread, but thanks for clarifying that Torque Pro is not the same as OBD Fusion. Feel free to start a new thread if you feel it's still necessary to answer your original question.

Sorry, consider my hand slapped.

[dmanb2b]

no worries...we are all good I also wish Torque Pro was on iPhone.

Sorry to forum for taking this OT

[Torqu3]

LATE last night I did an oil change, and replaced my thermostat.

Procedure: Thermostat took me about 5 hours. Could have been much faster if I had stopped screwing with trying to remove the intercooler so I could drain from the radiator. Also messed with the cooling fan way too long. Disconnect the coolant lines on the top and bottom of the EGR cooler CAREFULLY, and you'll have no issues finishing. I ended up cracking a piece off of the CCV right where the metal clip goes, but it doesn't interfere with anything so I just let it be. I ended up having to put about 5 liters back in the system.

Results: Immediately after the change I got the coolant temp up to 96C. I'm willing to bet that was due to low coolant. When I checked it this morning I had to add a liter to get it up to full. Now when I cruise around I get to about 88C-89C. I used to be lucky if I saw 72C. Very pleased with the results. Car doesn't feel smoother or anything, but I have peace of mind.

I also lost the intake side of my EGR block, so now I'm running a fully functional EGR. Couldn't find the block on the intake side. I heard it fall out but couldn't find it. I had all kinds of codes when I first fired it up, but cleared them and nothing came back.

Oil change was just your normal change. Nothing special.

[atwal187]

Drove from Vancouver BC to Kent, WA on Wednesday and picked a rear m sport bumper for $50 USD, just needs a repaint to match my car, was in fairly good condition with just a small tab broken. Shouldn't be much for the autobody shop. Picked up a 335is rear diffuser( I think it is ) for 80CAD. Hopefully the bumper will be close to a perfect fitment or minimal modifications required.

[geost]

Had my transmission serviced today. Oil pan replaced, fluids, mechatronics stuff, everything works great. Shifts smooth as butter!

[captpilly]

Was cold out today so I have put off T-stat, water pump, and fuel filter for a bit longer - however did finally change out the cabin air filter - looks like it needed it too

[32valves]

I finally pulled my def tank and pump assembly out. But I was wondering did anyone put the big heat shield back up.
I did but I'm afraid the air is going to catch it...

[32valves]

def tank was pretty clean when I dropped it...

[Yozh]

I washed my car today, finally. Sometimes, simple things could be so satisfying.

[BB_cuda]

Atwal, was the msport bumper for a diesel or a gasser? Asking if it has the little round door on driver side.

[rulonger]

Changed the oil and filter.
Replaced some missing screws to tighten up bumper cover where it attaches to fenders (discovered that two of the four were missing a few weekends ago when I was installing the LUX LED angel eyes)
Replaced several missing screws holding the belly pan in place.
Connected Carly and checked for codes.

[atwal187]

Originally Posted by BB_cuda

Atwal, was the msport bumper for a diesel or a gasser? Asking if it has the little round door on driver side.

Gasser , but I don't use DEF so it should be okay

[BB_cuda]

Originally Posted by atwal187

Gasser , but I don't use DEF so it should be okay

Question wasn't meant to be critical as I don't use DEF either. I just was thinking man, finding a used msport bumper in the first place is rare let alone a diesel one. $50 was definitely a find.

[BB_cuda]

32valves, I see the mid section of a CW exhaust there. I also see that weird dog bone thing I asked about in another thread. its on the back side of sub frame for the rear hanger of the differential.

[atwal187]

Originally Posted by BB_cuda

Question wasn't meant to be critical as I don't use DEF either. I just was thinking man, finding a used msport bumper in the first place is rare let alone a diesel one. $50 was definitely a find.

The guy was giving me for 170 m3 2dr front bumper, m3 4 dr rear bumper and m spor. God I love buying stuff from America