BMW AccessPORT v4.00 BETA Maps Now Available

BMWsky · 03-19-2012, 05:23 PM

Quote:

Originally Posted by COBB Tuning

This is an issue we have seen and we are getting it taken care of! Check your PM box so we can get some more info on your car. Thanks!

Ian

Ian,

I sent you an email yesterday about this; could you let me know when you get a chance.

Thanks

enrita · 03-19-2012, 05:29 PM

Rob: i sent you a mail yesterday, can you please answer it? .............................

socalfaded · 03-19-2012, 06:39 PM

Quote:

Originally Posted by rader1

What you will need to do is update the AccessPORT Manager to the BETA version. You can access this option in the "OPTIONS" -> "Advanced". Once the AccessPORT Manager is updated, you can then proceed to update the AccessPORT normally. I just had to do this the other day. Update the AP manager and you'll be good to go

Hey thanks!!!!
I just updated the accessport manager under options to 2.0.2.0
I then updated all the maps that can be updated but noticed they are all v301.
Shouldn't all the Beta maps be 4.0?
How do I get all the 4.0 maps?

Also when i'm on the website I see so many different maps.
I742S
I761S
I860S
I880S
I890S
I8A0S
IF80S
IGD0S
IHE02
IJC0S
IJCOS IS
IJEOS
IJEOS IS
IKBOS
IKBOS IS
IKBOS 1M
IKCOS IS
IKCOS 1M
which one should i update or when i use accesport tuner does the update do the correct one automatically?

Imperator · 03-19-2012, 06:52 PM

I've discovered an odd issue I haven't seen before. My car was updated today with ISTA/P v 2.46, a very new release, just over a week old. Once I got my car back, I tried re-installing the AccessPort this afternoon and found:

-The AP indicates my DME model as 'IJE0S,' where it's always been 'IJC0S'

-After I choose to accept the install, the AP does not proceed to the read/flash procedure and instead becomes stuck on the animated Cobb splash screen.

I am currently using the very latest handheld beta firmware (v1.6.5.0-3680). Has anyone encountered an issue like this after a DME update?

rooringhusky · 03-19-2012, 07:06 PM

Just dropping by to say that I love these new v400 BETA maps!! I have driven on Stage 2+FMIC Sport w/ 91 octane for a couple weeks and DAMN they are nice...Shifts are smooth as butter on my 6MT and no more bog/surges that I had experienced before!! I never had big complaints with the previous V3xx maps (have always been happy)..but now that I have the new more refined ones it would be hard to go back...Cobb has really outdone themselves this time!!

Now just looking forward to race gas, E85, and Meth maps!!

rooringhusky · 03-19-2012, 07:10 PM

Quote:

Originally Posted by socalfaded

Hey thanks!!!!
I just updated the accessport manager under options to 2.0.2.0
I then updated all the maps that can be updated but noticed they are all v301.
Shouldn't all the Beta maps be 4.0?
How do I get all the 4.0 maps?

Also when i'm on the website I see so many different maps.
I742S
I761S
I860S
I880S
I890S
I8A0S
IF80S
IGD0S
IHE02
IJC0S
IJCOS IS
IJEOS
IJEOS IS
IKBOS
IKBOS IS
IKBOS 1M
IKCOS IS
IKCOS 1M
which one should i update or when i use accesport tuner does the update do the correct one automatically?

When you connect the Accessport to the car it should automatically identify which ECU ROM version you have...

And BETA maps are under the Red BETA button which should be on this page: http://www.cobbtuning.com/AccessPORT...s/bmw/bmw-grid

enrita · 03-20-2012, 02:10 AM

Quote:

Originally Posted by Imperator

I've discovered an odd issue I haven't seen before. My car was updated today with ISTA/P v 2.46, a very new release, just over a week old. Once I got my car back, I tried re-installing the AccessPort this afternoon and found:

-The AP indicates my DME model as 'IJE0S,' where it's always been 'IJC0S'

-After I choose to accept the install, the AP does not proceed to the read/flash procedure and instead becomes stuck on the animated Cobb splash screen.

I am currently using the very latest handheld beta firmware (v1.6.5.0-3680). Has anyone encountered an issue like this after a DME update?

Cobb is surely keen to understand whats going on with your ap so mail them for support.

Imperator · 03-20-2012, 02:32 AM

Done before I even got on the forum. I'm just curious how some firmware versions interact with DME updates.

Dr_Dirt · 03-20-2012, 07:06 AM

Quote:

Originally Posted by Imperator

Done before I even got on the forum. I'm just curious how some firmware versions interact with DME updates.

Did they change your ECU?

Imperator · 03-20-2012, 02:32 PM

Quote:

Originally Posted by Dr_Dirt

Did they change your ECU?

The dealership just updated the calibration on all modules, including the DME. No parts were changed.

I just attempted the install again and all went smoothly. The only puzzling thing is how my DME type changed from IJC0S to IJE0S.

marv85 · 03-20-2012, 03:55 PM

Quote:

Originally Posted by Imperator

The dealership just updated the calibration on all modules, including the DME. No parts were changed.

I just attempted the install again and all went smoothly. The only puzzling thing is how my DME type changed from IJC0S to IJE0S.

It changes to whatever the Software the Dealership flashed on to your DME.

Imperator · 03-20-2012, 06:22 PM

Quote:

Originally Posted by marv85

It changes to whatever the Software the Dealership flashed on to your DME.

I wasn't aware the DME type can be changed through an integration update.

tscdennab · 03-20-2012, 06:33 PM

Quote:

Originally Posted by Imperator

I wasn't aware the DME type can be changed through an integration update.

I think that is simply some kind of encoding for the software version, not a DME type.

marv85 · 03-20-2012, 06:34 PM

Quote:

Originally Posted by Imperator

I wasn't aware the DME type can be changed through an integration update.

I'm pretty sure it does. It's the version... I Read some post by COBB about that. I also remember Vasil was showing different versions on his AP vs BT tool and it turns out the BT doesn't read the most recent update or something of that sort..

marv85 · 03-20-2012, 06:34 PM

Quote:

Originally Posted by tscdennab

I think that is simply some kind of encoding for the software version, not a DME type.

exactly, beat me to it

Phantom 335i · 03-20-2012, 06:39 PM

who can help me read a Log? don't know how to post it

skim7x · 03-20-2012, 06:40 PM

Quote:

Originally Posted by Phantom 335i

who can help me read a Log? don't know how to post it

Use http://www.javalotte.com/csvgraph/ to graph it. Then post up the graph here.

Phantom 335i · 03-20-2012, 06:46 PM

hmm cant figure it out

BMWsky · 03-20-2012, 08:11 PM

Thanks Ian, I got the 4.01 maps and did some "spirited" driving...VERY nice!

rader1 · 03-20-2012, 08:54 PM

Quote:

Originally Posted by Phantom 335i

hmm cant figure it out

Download this software below and use the included datalogging program. It works ver well but I don't like how the scaling is setup. It can be somewhat misleading at first but get used to it and it's a good system.
http://www.bradbarnhill.com/projects/VirtualDyno/

BMWsky · 03-21-2012, 08:50 AM

I was having issues with the 4.00 maps so Ian sent me the 4.01 version (IJEOS) yesterday. I had a chance to do some spirited driving last night and this morning; I've got to say, this upgrade is SMOOTH and fast. (Stage 1+)

Going to try Stage 2+ this evening...

335(EX)(EYE) · 03-21-2012, 09:37 AM

i am getting up to 19psi on aggresive stage 1 is that ok? i dontknow jack yeaht. but learning.

03-19-2012, 05:29 PM	#222
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Rob: i sent you a mail yesterday, can you please answer it? ............................. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

03-19-2012, 06:52 PM	#224
Imperator Major 57 Rep 1,175 Posts Drives: 2010 E92 335i Join Date: Mar 2010 Location: Plano, Texas iTrader: (8)	I've discovered an odd issue I haven't seen before. My car was updated today with ISTA/P v 2.46, a very new release, just over a week old. Once I got my car back, I tried re-installing the AccessPort this afternoon and found: -The AP indicates my DME model as 'IJE0S,' where it's always been 'IJC0S' -After I choose to accept the install, the AP does not proceed to the read/flash procedure and instead becomes stuck on the animated Cobb splash screen. I am currently using the very latest handheld beta firmware (v1.6.5.0-3680). Has anyone encountered an issue like this after a DME update?
	Appreciate 0 Quote

03-19-2012, 07:06 PM	#225
rooringhusky Objects in the mirror are losing 107 Rep 1,133 Posts Drives: 2007 BMW 335i E92 AW/CR 6MT Join Date: Mar 2011 Location: Socal (OC/Riverside) iTrader: (19) Garage List 2007 BMW 335i [10.00]	Just dropping by to say that I love these new v400 BETA maps!! I have driven on Stage 2+FMIC Sport w/ 91 octane for a couple weeks and DAMN they are nice...Shifts are smooth as butter on my 6MT and no more bog/surges that I had experienced before!! I never had big complaints with the previous V3xx maps (have always been happy)..but now that I have the new more refined ones it would be hard to go back...Cobb has really outdone themselves this time!! Now just looking forward to race gas, E85, and Meth maps!! __________________ PERFORMANCE: JB4 G5 \ Backend Flash \ DCI \ BMS Downpipes \ CX FMIC \ ER Chargepipe \ Synapse BOV \ KW V2 \ Muffler Delete \ CDV \ ZHP Shifter \ Cyba Scoops FUN: M3 Front \ Mtech Rear \ JL 10W6 \ ModMyNav \ V1 Hardwired \ LUX H8 \ Gloss Black Trim \ Gloss Black Roof \ Cyba Quads \ Cyba Mtech Diffuser
	Appreciate 0 Quote

03-20-2012, 02:32 AM	#228
Imperator Major 57 Rep 1,175 Posts Drives: 2010 E92 335i Join Date: Mar 2010 Location: Plano, Texas iTrader: (8)	Done before I even got on the forum. I'm just curious how some firmware versions interact with DME updates.
	Appreciate 0 Quote

03-20-2012, 06:39 PM	#236
Phantom 335i Second Lieutenant 12 Rep 270 Posts Drives: 335i Join Date: Nov 2011 Location: Edmonton iTrader: (2) Garage List 2007 BMW 335i [0.00]	who can help me read a Log? don't know how to post it
	Appreciate 0 Quote

03-20-2012, 06:46 PM	#238
Phantom 335i Second Lieutenant 12 Rep 270 Posts Drives: 335i Join Date: Nov 2011 Location: Edmonton iTrader: (2) Garage List 2007 BMW 335i [0.00]	hmm cant figure it out
	Appreciate 0 Quote

03-20-2012, 08:11 PM	#239
BMWsky Major 25 Rep 1,244 Posts Drives: 335i Join Date: Dec 2010 Location: Webster NY iTrader: (1)	Thanks Ian, I got the 4.01 maps and did some "spirited" driving...VERY nice!
	Appreciate 0 Quote

03-21-2012, 08:50 AM	#241
BMWsky Major 25 Rep 1,244 Posts Drives: 335i Join Date: Dec 2010 Location: Webster NY iTrader: (1)	I was having issues with the 4.00 maps so Ian sent me the 4.01 version (IJEOS) yesterday. I had a chance to do some spirited driving last night and this morning; I've got to say, this upgrade is SMOOTH and fast. (Stage 1+) Going to try Stage 2+ this evening...
	Appreciate 0 Quote

03-21-2012, 09:37 AM	#242
335(EX)(EYE) Banned 52 Rep 1,497 Posts Drives: e90 n54 & n55 / e46 330ci DD Join Date: Oct 2011 Location: Harrisburg PA iTrader: (14)	i am getting up to 19psi on aggresive stage 1 is that ok? i dontknow jack yeaht. but learning.
	Appreciate 0 Quote