[Magic-Man]

Anyone have a rev hang issue in DS when when flooring it & then letting off on the 300 maps?

[805beemer]

Originally Posted by Magic-Man

Anyone have a rev hang issue in DS when when flooring it & then letting off on the 300 maps?

isn't that the point of ds mode. when reving the motor up to say 6000 rpms and then back off throttle it will hold there on my car which is stock for a good 10-20 seconds before up shifting to see whether i will get back on the gas or if I've had enough fun.

[TMack]

Originally Posted by NYAWE60

You're about spot on with the last part about flooring it. Its far from sedate, I might have been a bit misleading. Let me assure you a car of this size moving the way it does is incredible. I've found myself cheesing on so many occasions over the past 12 hours. I cant wait to leave to go home on the freeway again

I'm running Cobb on my 535xi and it's FAR from sedate. It actually scares me.

[tomob63]

3.01 is out:
http://www.e90post.com/forums/showthread.php?t=585798

[GhostyM]

Z4 35is support yet?!

[Concorde]

Quick question here : could I buy a second hand AP from a subaru or mazda owner and use it to flash my car ? I guess not, but I'd like to know why ...

Thanks

[nafoo]

Originally Posted by Concorde

Quick question here : could I buy a second hand AP from a subaru or mazda owner and use it to flash my car ? I guess not, but I'd like to know why ...

Thanks

No. Because? You drive a BMW.

[COBB Tuning]

To all BMW AP users:

Before updating your AccessPORT, please delete the ROM file from your file listing in AP Manager. Please note, this will not delete your stock ROM file that the AP uses during the un-install process. Once this is deleted, you should now have enough memory and space on the AP and no problems updating the firmware on your AccessPORT.

If your AccessPORT is currently stuck in Updating mode, please connect to AP Manager, click on the Updates tab, and press Ctrl+Shift+F11. This will allow you to exit updating mode. Then, delete your ROM, check the "Force update" box, and do the update again.

As always, if you have any other questions, please call us at 866-922-3059 or email us at tech@cobbtuning.com

Ian

[Glowin]

Originally Posted by dzenno

I had no idea I'd even try Cobb back then when Shiv was here...I thought that a flash wouldn't be compatible with the wastegates on my car and boost control would be foooked...it was by complete chance that I got a great price on an AP, took the trial to give it a whirl...

after running and seeing how SOLID AFRs looked at part throttle shocked me immediately!

That was the major reason for it...piggies can't come even close to flash AFR or timing control...on top of everything Cobb really surprised me with the depth of logging capabilities which, when you're as anal retentive as me about how the car runs, is VERY important..

Super lean (high teens) AFR's under partial throttle, to the point the car would stutter (so it was noticeable while driving - not just on the AFR gauge), has been my life story this year...

At least your success story is a good backup plan if my new Procede doesn't work out. I'll miss my boost and AFR gauges though on the dash. I wish Cobb would incorporate them like the piggies have.

[dzenno]

Originally Posted by Glowin

Super lean (high teens) AFR's under partial throttle, to the point the car would stutter (so it was noticeable while driving - not just on the AFR gauge), has been my life story this year...

At least your success story is a good backup plan if my new Procede doesn't work out. I'll miss my boost and AFR gauges though on the dash. I wish Cobb would incorporate them like the piggies have.

I'd sell the procede and get a jb4 instead as you can run it totally passthrough AND keep the gauges + shift light + meth integration going while running any of the Cobb maps and waiting on Cobb to deliver the rest...procede won't give you all this without actually running a map as it has no such mode/map..

[BMWsky]

Originally Posted by Glowin

...I'll miss my boost and AFR gauges though on the dash. I wish Cobb would incorporate them like the piggies have.

I would die and go to heaven if the data logging from Cobb was displayed on the iDrive.

[kaigoss69]

Stupid question of the day: I've updated the firmware on the AP... do I need to uninstall and reinstall (which takes considerably longer and drains my dying battery) or can i just load the new maps???

[NYAWE60]

Originally Posted by BMWsky

I would die and go to heaven if the data logging from Cobb was displayed on the iDrive.

That would be similar to the GTR. . . damn you just put that thought in my head, CURSE YOU

[uwotm8]

Originally Posted by kaigoss69

Stupid question of the day: I've updated the firmware on the AP... do I need to uninstall and reinstall (which takes considerably longer and drains my dying battery) or can i just load the new maps???

You should be able to flash the new map over. No need to uninstall/reinstall. The first process just marries the AP to the car and takes longer.

[BMWsky]

Originally Posted by NYAWE60

That would be similar to the GTR. . . damn you just put that thought in my head, CURSE YOU

[Dr_Dirt]

Someone should make a piggie just for gauges .

[Glowin]

Originally Posted by dzenno

I'd sell the procede and get a jb4 instead as you can run it totally passthrough AND keep the gauges + shift light + meth integration going while running any of the Cobb maps and waiting on Cobb to deliver the rest...procede won't give you all this without actually running a map as it has no such mode/map..

Thanks for reminding me... I'll miss my shift light and beep too!

If I was to sell the Procede though, I'd have a hard time justifying spending $500 on a JB4 just to get the gauges and the shift light. I'm not running meth (and have no short term plans for it unfortunately, and if I was, I like the new Procede setup, though I haven't researched JB4's I have to admit). Not to mention the PITA of install/uninstall under the hood - I still have a year warranty left and I take my time, so it's an hour of work each time.

Has anyone contacted Cobb to see if they are interested / can incorporate the gauges like boost at least into the dash? Or a shift light concept?

[dzenno]

Originally Posted by Glowin

Thanks for reminding me... I'll miss my shift light and beep too!

If I was to sell the Procede though, I'd have a hard time justifying spending $500 on a JB4 just to get the gauges and the shift light. I'm not running meth (and have no short term plans for it unfortunately, and if I was, I like the new Procede setup, though I haven't researched JB4's I have to admit). Not to mention the PITA of install/uninstall under the hood - I still have a year warranty left and I take my time, so it's an hour of work each time.

Has anyone contacted Cobb to see if they are interested / can incorporate the gauges like boost at least into the dash? Or a shift light concept?

its expensive for sure and IMHO not worth it but I just offered you some advice on what's "possible" at the moment...

Not sure what Cobb will be doing in terms of other features but the AP already has a shift light feature built into it, you just need to plug it into the obd port and mount the thing somewhere on the vent say and there you go...other features will probably be AP driven as well but who knows, tuning first gimmicks last

[themyst]

Originally Posted by Dr_Dirt

Someone should make a piggie just for gauges .

That idea is being considered by BMS.

[korben dallas]

Originally Posted by Glowin

Has anyone contacted Cobb to see if they are interested / can incorporate the gauges like boost at least into the dash? Or a shift light concept?

I doubt they will be able to do anything like remapping the gauges (including shift light via turn signals), though the AP itself can function as a shift light if you mount it on your dash. When your shift point is reached the screen will turn red.

[dzenno]

Originally Posted by korben dallas

I doubt they will be able to do anything like remapping the gauges (including shift light via turn signals), though the AP itself can function as a shift light if you mount it on your dash. When your shift point is reached the screen will turn red.

Of course they are, they just need to write code for it...all info is right on the canbus, all they need to do is register as a node on the canbus, get all the data and send it over to the gauges which basically have no choice but to move but those are gimmicks and there's some of us that want to run 10s and 11s first on a solid tune

[korben dallas]

Originally Posted by dzenno

Of course they are, they just need to write code for it...all info is right on the canbus, all they need to do is register as a node on the canbus, get all the data and send it over to the gauges which basically have no choice but to move but those are gimmicks and there's some of us that want to run 10s and 11s first on a solid tune

Well, "able to" may have been the wrong choice of words, but I gotta think that there is a decent gap between reading info from the canbus and rewriting tables to changing functionality of components from a flash perspective.