Sponsored by The Tire Rack

[SSBMW]

Might be pulling the trigger on a set of RDSport RD2's 19x8.5 ET19 and 19x8.5 ET22. Do you think this will work (with fender rolling) on a e92 lowered on Eibach Prokit springs and with Hankook Ventus V12 K110's. Any help would be appreciated.

[lyndon_h]

Originally Posted by SSBMW

Might be pulling the trigger on a set of RDSport RD2's 19x8.5 ET19 and 19x8.5 ET22. Do you think this will work (with fender rolling) on a e92 lowered on Eibach Prokit springs and with Hankook Ventus V12 K110's. Any help would be appreciated.

What size V12's?

[SSBMW]

Originally Posted by lyndon_h

What size V12's?

Sorry, meant to say 19x9.5 et 22 for the rear in my original post. Tire sizes are 235/35/19 & 265/30/19.

[lyndon_h]

Originally Posted by SSBMW

Sorry, meant to say 19x9.5 et 22 for the rear in my original post. Tire sizes are 235/35/19 & 265/30/19.

From what i've read, that setup seems to be pretty good.

[lyndon_h]

Quick question, do the V12's have decent rim protection? I'm interested some V12's 265/30/19 in the back of my e90, but I really like 275's for the rim protection on VM710's 9.5". thx

[SSBMW]

Originally Posted by lyndon_h

From what i've read, that setup seems to be pretty good.

Thats what I have read so far also. I guess only time will tell.

Originally Posted by lyndon_h

Quick question, do the V12's have decent rim protection? I'm interested some V12's 265/30/19 in the back of my e90, but I really like 275's for the rim protection on VM710's 9.5". thx

265 should be fine for a 9.5" with plenty of lip protection

[lyndon_h]

Originally Posted by SSBMW

265 should be fine for a 9.5" with plenty of lip protection

Thanks, thats great news. I wanted to ask because i was disappointed with the fact that the General UHP's didn't offer sufficient rim protection in 265 width for 9.5" VM710's

[hun77777]

Originally Posted by SSBMW

Might be pulling the trigger on a set of RDSport RD2's 19x8.5 ET19 and 19x9.5 ET22. Do you think this will work (with fender rolling) on a e92 lowered on Eibach Prokit springs and with Hankook Ventus V12 K110's. Any help would be appreciated.

i ran ET22 with 265s before. no issues, although each rims are little different with same offset.i think you should be fine with rolled fender.

[SSBMW]

Originally Posted by hun77777

i ran ET22 with 265s before. no issues, although each rims are little different with same offset.i think you should be fine with rolled fender.

Thanks

[Robmaster]

Originally Posted by SSBMW

Might be pulling the trigger on a set of RDSport RD2's 19x8.5 ET19 and 19x8.5 ET22. Do you think this will work (with fender rolling) on a e92 lowered on Eibach Prokit springs and with Hankook Ventus V12 K110's. Any help would be appreciated.

i dont think the front wheel would fit without problems. ET19 is damn aggressiv!

[Robmaster]

Originally Posted by hun77777

i for one ran ET22 with 265s. no issue there with rolled fenders.

with a 19x9.5 wheel? did you have pics?

[SSBMW]

i dont think the front wheel would fit without problems. ET19 is damn aggressiv!

Nick a jlevisw says this is what Rdsport has for the e9X

[SSBMW]

Originally Posted by Robmaster

with a 19x9.5 wheel? did you have pics?

Here is the link from where I got the idea to go with the RD2's. I think you even posted on this one asking for the specs. He was running Pirelli P Zero Nero tires, 235/35/19 and 265/30/19 with et 20 and et 22.

http://www.e90post.com/forums/showth...hlight=rdsport

[joec500]

Originally Posted by hun77777

i ran ET22 with 265s before. no issues, although each rims are little different with same offset.i think you should be fine with rolled fender.

Quick question....My E92 has fenders rolled, lowered, and I am running LC lemans 19x10 et37's with a 12mm spacer on 265/30/19 FK452's...No rubbing, thinking of moving to a VMR V701 same tire but on 19x9.5 ET22

In theory they should also fit, but since my tires are stretched over the 10" wheel vs the 9.5" wheel, do you think this would cause rubbing?

[marcel b]

no, it should not. as the wheel is narrower. 1/4 inch in and outside, tire the same.

[joec500]

Originally Posted by marcel b

no, it should not. as the wheel is narrower. 1/4 inch in and outside, tire the same.

Thanks Marcel...That's what I figuired

[hun77777]

Originally Posted by marcel b

no, it should not. as the wheel is narrower. 1/4 inch in and outside, tire the same.

+1 what he said!

[joec500]

Originally Posted by hun77777

+1 what he said!

Awesome...my wheels just came in and will be mounted on Tuesday.

V701's

19x8.5 ET35 FK 452 235/35/19
19x9.5 ET22 Fk 452 265/30/19
--------------------------------------
Current:
E92
Fenders Rolled
LC Lemans

19x8.5 ET30 FK452 235/35/19
19x10 ET37 + 12MM spacer FK452 265/30/19

No Rubbing...


------------------------
As per above, The fronts are well within the limits...The rears should also fit, I hope I didn't make a mistake going with the ET22 instead of the ET33 for the rear, but I wanted aggressive!

Thanks for maintaining this thread!

P.S. Hun, I am in Seattle Today, and the weather is gorgeous, I must have brought the sun with me from San Francisco

[hun77777]

Originally Posted by joec500

P.S. Hun, I am in Seattle Today, and the weather is gorgeous, I must have brought the sun with me from San Francisco

please move up to seattle permanently !!!

[joec500]

Originally Posted by hun77777

please move up to seattle permanently !!!

I do love it up here, I actually grew up here, so I come up quite often.

Sorry for the Off Topic

[Robmaster]

hey guy, let's talk about the front wheels....

19x8.5 ET20 with a 225/35/19 tire.... can that fit on a E92?

[hun77777]

unless otherwise i have camber kit, i wouldn't try it... 225 would be bit of stretch look also...