[J0K3R5]

v.4.27.20_PSdZData_Lite

added
.

[J0K3R5]

ISTA_v4.27.22 - Sedoy Standalone

added
.

[J0K3R5]

v.4.27.20_PSdZData_Full

added
.

[mikeywarduk]

Anybody help I'm trying to install just ista d but haven't got a clue which files to download or anything I've got team viewer if any body could help me

[enerdjy]

Hello everyone ! So i have BMW e90 2.0d 163hp automatic gerbox, last week my ECU was damaged by rain. I bought new ECU, EWS with keys from manual gearbox, and now I'm trying flash it with WinKFP to put my VIN, but when i enter ZUSB to find witch family is new ECU, it gives me error Check assembly file. So i tried to find it in SPdata - data folder, but there is no file with my ZB number (E89 loaded in WinKFP).
SP Date - v.67.1
WinKFP -v.5.3.1
New DME/DDE ZB n.- 7803272
Old DME - not responding

Do someone have a solution for that ?

[J0K3R5]

Ldee247
mikeywarduk
enerdjy

Please make your own thread, you will get more of a chance of getting help that way.

[J0K3R5]

North America NEXT 2021-1
Europe East Motion 2021
Europe East MOVE 2020
Europe East PREMIUM 2021-1
Europe EVO 2020-3
Europe WAY 2020-3
Europe West Motion 2021
Europe West MOVE 2020
Europe West PREMIUM 2021-1


added
.


All maps below 2021 have been removed

[J0K3R5]

A bit of house cleaning had to been done, running out of hosting space.

Older Ista have been removed
Older SatNav maps have been removed

[Rollerpig]

Can anybody help please I'm trying to install ISTA + but haven't got a clue which files to download or anything, have a 2012 build E91 N47 engine looking to read faults and possibly code too

Thanks

[J0K3R5]

Originally Posted by Rollerpig

Can anybody help please I'm trying to install ISTA + but haven't got a clue which files to download or anything, have a 2012 build E91 N47 engine looking to read faults and possibly code too

Thanks

https://mega.nz/folder/wlpHiI4a#f54pFHrRuYfA164xrSTlPA

[Rollerpig]

Originally Posted by J0K3R5

https://mega.nz/folder/wlpHiI4a#f54pFHrRuYfA164xrSTlPA

Awesome thank you J0k3R5

[Gedas8640]

Hi,

When deleting fault codes in, ista-d. I'm stuck on this message for the last 30minutes.

"Switch off the ignition and remove the ignition key with remote control from the key slot (if present)"

Is there are any solution to this?

[MrSweet1991]

Originally Posted by Gedas8640

Hi,

When deleting fault codes in, ista-d. I'm stuck on this message for the last 30minutes.

"Switch off the ignition and remove the ignition key with remote control from the key slot (if present)"

Is there are any solution to this?

Page 10

[mustaphadoun]

merci bien vous etes genial

[Gedas8640]

Originally Posted by MrSweet1991

Page 10

Hi mate, have tried but no success. Any other suggestions please?

[MrSweet1991]

Originally Posted by Gedas8640

Hi mate, have tried but no success. Any other suggestions please?

Hi mate,

What exactly happened?

[Gedas8640]

When ever I'm trying to clear error memory with ISTA D I'm getting the following error: "Switch off the ignition and remove the ignition key with remote control from the key slot (if present)" and nothing changes when im removing key as well as there is only cancel option on the error window.

[MrSweet1991]

Originally Posted by Gedas8640

When ever I'm trying to clear error memory with ISTA D I'm getting the following error: "Switch off the ignition and remove the ignition key with remote control from the key slot (if present)" and nothing changes when im removing key as well as there is only cancel option on the error window.

That's why I said to go to page 10 where the install instructions are for the

"NodeEdiabasVoltageControl"

The Mega link contains that software and once you install that you will be able to run the software and manually change the voltages of ignition so ISTA thinks you've turned the ignition on and off.

[grinsekatze]

Hi J0K3R5,

Any chance you could re-publish Road Maps MIDDLE EAST EVO 2020-2 on mega.nz?
I would really appreciate it.

Many thanks!

[J0K3R5]

Originally Posted by grinsekatze

Hi J0K3R5,

Any chance you could re-publish Road Maps MIDDLE EAST EVO 2020-2 on mega.nz?
I would really appreciate it.

Many thanks!

Had to delete files for space.
Need to check if I backed it up

[thesugarat]

J0K3R5, big thanks for consolidating all this. I'm thinking of installing the Standalone ISTA-P 3.67.1.006 version you have available, but there aren't any install instructions available. Did I miss something?

Edit: Nevermind... I figured it out.

[Wozza77]

Originally Posted by MrSweet1991

That's why I said to go to page 10 where the install instructions are for the

"NodeEdiabasVoltageControl"

The Mega link contains that software and once you install that you will be able to run the software and manually change the voltages of ignition so ISTA thinks you've turned the ignition on and off.

Following the instructions but the file "AllowFakeISTAOperation.reg" Seems to be missing.