[S114HED]

It is in the sense although it apparently needs to be coded for the start and stop function. Have still purchased it yet though, was just checking the price.

[makkan00]

Originally Posted by S114HED

It is in the sense although it apparently needs to be coded for the start and stop function. Have still purchased it yet though, was just checking the price.

If your new battery has same Ah as your existing one, and comes with 3-5 years warranty, don't bother to get it reset. (and you should buy same Ah as your existing one).

However if you have bought or going to buy different Ah, then changing the files on your car and resetting IBS is useful.

[RSM]

Just thought id give an update on my question earlier on in the thread.

I fitted Lci "high" rear lights to my pre facelift e87 BMW and wanted them coded to look how they would look on a car standard fit with just the led celis bars lit.

With me being from the Essex area, Makkan00 came to the rescue and offered his coding services. I fitted these lights Tuesday evening and on the Wednesday Sam ( MAkkan00) had sorted my coding out and also disabled the bulb check for me.

Very impressed with his knowledge in coding and the job went without a hitch. I very much recommend his services to anyone that wants their car coded.

So thank you very much Sam, was a pleasure to meet you, hope to meet again when the weather improves and have a look at your car.

[makkan00]

^^^
Thanks Rob. Was nice to meet you and code another E87. Defo, will meet again when weather is good.

[NormanHomes]

im in the process of sourcing the last bits to upgrade my business nav to a professional, are you able to code this?

also i have a dension 500 coded in at the moe do you know if this will have to be re coded if i change the nav?

any coders in milton keynes on here?

[makkan00]

Originally Posted by NormanHomes

im in the process of sourcing the last bits to upgrade my business nav to a professional, are you able to code this?

also i have a dension 500 coded in at the moe do you know if this will have to be re coded if i change the nav?

any coders in milton keynes on here?

Are you upgrading
1- CCC bussiness (B) to professional (P) CCC?
2- CIC B to CIC P?
3- CCC B to CIC P?

Depending on how dension was coded, you may get away / or may require to recode it.

[p_jm]

Hi all, getting an x5 in a couple of months and interested in coding. Does it also work on x5?

[p_jm]

Should have mentioned I will be in London area

[p_jm]

Stupidly thought I was getting satellite radio when I ordered DAB. Anyone know if it is possible to have satelitte radio without spending a fortune? I can get it through my iPhone app Tunein but it would eat up the data allowance pretty quickly

[NormanHomes]

Originally Posted by makkan00

Are you upgrading
1- CCC bussiness (B) to professional (P) CCC?
2- CIC B to CIC P?
3- CCC B to CIC P?

Depending on how dension was coded, you may get away / or may require to recode it.

whoops its CCC B to CCC P

the dension was coded with the retrofit option on autologic if that makes any diff

[makkan00]

Originally Posted by NormanHomes

whoops its CCC B to CCC P

the dension was coded with the retrofit option on autologic if that makes any diff

I can code that. Your dension coding will wipe and will require re-coding.
HTH.

[NormanHomes]

ok cheers, ill give you a shout when ive sourced everything

[cjbryce]

What a great thread. I'll be contacting meysho as soon as my PMs are available - I have an E93 which could usefully have a few things done such mirror folding.

[Heinzy]

Hey guys, I'm new to the forum, literally out of the box this is my first day new

I'm looking for a coder east herts / essex way

I've been reading all over the internet about retrofitting a CCC Navigation Pro into my E92 2008 330D, I've sourced the kit, checked the wiring diagrams, ensured all hardware is dated around the same time as my car and I'm pretty sure I'm ready to install

I'll be looking to install in a couple of weeks and need an expert coder to get car and nav talking to each other

I was also looking for the navigation software to be upgraded too as I was looking to fir the CIC controller afterwards

Any help would be much appreciated

[alpina527]

Originally Posted by Heinzy

Hey guys, I'm new to the forum, literally out of the box this is my first day new

I'm looking for a coder east herts / essex way

I've been reading all over the internet about retrofitting a CCC Navigation Pro into my E92 2008 330D, I've sourced the kit, checked the wiring diagrams, ensured all hardware is dated around the same time as my car and I'm pretty sure I'm ready to install

I'll be looking to install in a couple of weeks and need an expert coder to get car and nav talking to each other

I was also looking for the navigation software to be upgraded too as I was looking to fir the CIC controller afterwards

Any help would be much appreciated

I can do that. Drop me a pm and we can go from there.

[1sh@Crystalwhite]

Looking for a Coder in the NW - to code out LCI tail lights, Pref whom can make a house call!

[andyrap]

Wow. Found this thread after searching about coding to hifi and my jaw is dropping at all the tweaks that can be coded. Amazing stuff!

I'm down in Dorset and looks like a trip to London will be necessary but well worth it for some of those changes.

[colinc2m2c]

Originally Posted by andyrap

Wow. Found this thread after searching about coding to hifi and my jaw is dropping at all the tweaks that can be coded. Amazing stuff!

I'm down in Dorset and looks like a trip to London will be necessary but well worth it for some of those changes.

+1

[r11co]

My heid's bustin (as they say around these parts!)

I reckon I'll be needing the services of a coder in Glasgow/West Scotland area at some point in the next few years of E90 ownership...

Either that or I'm willing to learn myself.......

[andyrap]

So I met up with Sam (Makkan00) on Saturday night to sort some coding on my E91. Firstly - what a top guy giving up a couple of hours on a Saturday evening after work. I'm based way down in Dorset but was in London for a couple of days working so Sam was actually the most convenient coder for me.

Anyway, the main goal was to code my HU to hifi and unfortunately being a late (awkward) E91, the car won. Sam tells me the base units with bluetooth built in need coding over MOST / fibre but it was no big deal. I can live without for now

On to the rest of it, we went all out for just about everything possible on my car. So here's the list. I don't think I've forgotten anything!

• Flashing headlights on alarm
• Max volume on alarm
• Follow me home / welcome lights on remote press
• Panic alarm on remote
• Folding mirrors on lock from remote (selectable) - THIS IS SO GOOD!
• Adjusted angle of auto-reversing mirror (went a bit far in retrospect, but should save my alloys when parking...)
• Comfort unlock on engine stop (I think that's what it's called). Basically hold the Start/Stop button to kill the engine, and the keyfob ejects, lights come on and the doors unlock. It's very cool.
• OBC functions - true speed (GPS accurate), instant MPG)
• Max brightness for angel eyes

I'm really pleased with everything Sam did. It unlocked some very cool features that make the car that little bit better to use. The mirror fold on remote is my favourite feature by far seeing as I'm a perpetual mirror folder. Really recommend getting in touch with Makkan if you're interested in getting anything coded. He really knows his stuff and is a great guy.

[magic77]

I really got to do some of these coding options epsecially the angels

[makkan00]

Originally Posted by andyrap

I'm really pleased with everything Sam did. It unlocked some very cool features that make the car that little bit better to use. The mirror fold on remote is my favourite feature by far seeing as I'm a perpetual mirror folder. Really recommend getting in touch with Makkan if you're interested in getting anything coded. He really knows his stuff and is a great guy.

Andy
Many thanks for leaving a comprehensive feedback. Appreciate it.