Walnut Blasting - Michigan - MAY 3-4, 2014

SP3333D · 05-02-2014, 09:05 AM

Quote:

Originally Posted by Agent11br

Quote:

Originally Posted by Turn In Concepts

In all honesty these engines stay hot for hours after shutting down. However for all intensive purposes 30 minutes is enough to make it bearable. Just don't be out doing back to back 60-130 pulls before showing up and we should be good

^^^
Tim on some Sunoco 1xx fuel "cruising" down I-75 S

there is a nice long straight away for the last 10 miles or so before the exit, don't think I have ever run that under 100mph...

Blaster400 · 05-02-2014, 09:10 AM

Quote:

Originally Posted by Agent11br

^^^
Tim on some Sunoco 1xx fuel "cruising" down I-75 S

Until I hit a Michigan pothole.

335xs2dinan · 05-02-2014, 09:47 AM

is there an update on coding? ie day/times? i didnt quite find my way to this in time to get a time slot but still interested in driving down and getting the alpina transmisson tune and maybe a couple other things. thanks!

e90Mark · 05-02-2014, 10:25 AM

I mean I'll have a cable with me. Dunno if Steve ended up setting up the network in the barn though or whose doing the coding.

Turn In Concepts · 05-02-2014, 11:10 AM

1 day left!

I have everything loaded up in the truck and everyone has confirmed their appointments so we are in good shape.

We will be hitting the road shortly and resting up well tonight. Lot's of work ahead of us tomorrow and we are definitely looking forward to it. See you guys bright and early!

-Kent

SP3333D · 05-02-2014, 11:41 AM

Quote:

Originally Posted by Blaster400

Until I hit a Michigan pothole.

lol, it is worth noting that I have seen patch crews all over the place around there lately, BUT, you will want to avoid Reindhardt Rd if at all possible(GPS's love Reindhardt, your car will not!), Your best bet is to take Telegraph to Stewart which becomes bluebush.

SP3333D · 05-02-2014, 11:45 AM

Quote:

Originally Posted by e90Mark

I mean I'll have a cable with me. Dunno if Steve ended up setting up the network in the barn though or whose doing the coding.

I can still make something happen. I didn't get a network run to the main building when this sounded like it was not happening, but I do have my wifi extended out to the garage and a large portion of the driveway and I can probably leapfrog it a little further(Maybe reach the barns?!?!?) with the equipment I have on hand.

Edit: I will grab a spool of Cat6 cable while I am at Home Depot later and run a router out to the building. Cell service kinda sucks out there too, so this will offer free WiFi to those who are waiting

Turn In Concepts · 05-03-2014, 02:06 PM

Making great progress today!

I am going to be able to open up a couple more spots for walnut blasting tomorrow so if anyone would like to join in on the group buy feel free to give me a call to set it up. My cell number is 5138006858.

-Kent

J-Spec Dan · 05-03-2014, 03:58 PM

Thanks to the TiC guys for driving up to MI this weekend.
Thanks Brandon for setting this all up and of course, thanks to Steve for having a place for all the work to take place.

dsjr2006 · 05-03-2014, 06:34 PM

elite. · 05-03-2014, 06:40 PM

should I be worried about my walnut blasting appt tomorrow.....concerned about the alcohol consumption tonight lol. how are your cars feeling that were walnut blasted today folks?

charrigan · 05-03-2014, 07:53 PM

I can't wait to get mine blasted. I think my timing pull on jb4 is related to dirty valves.

Do I win a prize for dirtiest valves? As far as I know they haven't been touched in 117k miles :/

SP3333D · 05-03-2014, 08:15 PM

Quote:

Originally Posted by elite.

should I be worried about my walnut blasting appt tomorrow.....concerned about the alcohol consumption tonight lol. how are your cars feeling that were walnut blasted today folks?

lmao. we were all drinking, but the TIC guys refused to have a drop while working on the cars. we did however take a few cars drifting and build a jump for one of my jeeps... was a lot of fun!

SP3333D · 05-03-2014, 08:27 PM

Quote:

Originally Posted by dsjr2006

lol. I may have been wasted by this point in the day. but that was epic good fun!

Ovitrix335 · 05-03-2014, 11:13 PM

I had my valves walnut blasted today. The car feels better, very smooth. Thanks to TIC guys for great work. Nice guys to deal with. Looking forward to do more business with you guys. Thanks to Brandon and Steve to set this up.
P.s. Steve, ease up on that beer bruh.. Lolllll

)))

Nic

e90Mark · 05-04-2014, 03:00 AM

Fun meet today. Nice meeting everybody. The TIC guys are a great group of guys and do great work. Knocking out the cars well within the time slots.
Wish I could comment on the difference of a walnut blast, but my car started throwing crazy misfires after changing the plugs and of course had no coils on hand. Have a full new set coming in this week..

The pictures Dan posted of valves are of my car.

Here's another vid of the subarmw's.

SP3333D · 05-04-2014, 12:24 PM

SP3333D · 05-04-2014, 12:25 PM

my favorite part of the weekend tho

fastaction · 05-04-2014, 02:48 PM

Who knew servicing your BMW could be so much fun! Big thumbs up to Steve for hosting it. Kent and the TIC crew were all business and did a great job at an incredible price. Thanks to everyone who made this happen!!

335xs2dinan · 05-04-2014, 03:55 PM

Quote:

Originally Posted by fastaction

Who knew servicing your BMW could be so much fun! Big thumbs up to Steve for hosting it. Kent and the TIC crew were all business and did a great job at an incredible price. Thanks to everyone who made this happen!!

agree, thanks again TIC and everyone who helped set up

Blaster400 · 05-04-2014, 05:29 PM

Quote:

Originally Posted by 335xs2dinan

agree, thanks again TIC and everyone who helped set up

Huge thank you to everyone involved!! TIC/Kent were total professionals and worked very fast, Steve had the perfect location, and Brandon had the original idea to set this up. I am super happy with the results and pretty sure everyone else feels the same way.

SP3333D · 05-04-2014, 06:21 PM

with as well as this worked out and as much fun as we had, we ought to do our own east side version of euro hanger.

05-02-2014, 09:47 AM	#267
335xs2dinan Lieutenant 161 Rep 440 Posts Drives: 08 E92 335xi, 22 G80 M3 Join Date: Jul 2013 Location: Michigan iTrader: (15)	is there an update on coding? ie day/times? i didnt quite find my way to this in time to get a time slot but still interested in driving down and getting the alpina transmisson tune and maybe a couple other things. thanks!
	Appreciate 0 Quote

05-02-2014, 10:25 AM	#268
e90Mark Captain 31 Rep 722 Posts Drives: 2008 BMW 335xi Join Date: Aug 2013 Location: Detroit iTrader: (5) Garage List 2008 BMW 335xi [10.00]	I mean I'll have a cable with me. Dunno if Steve ended up setting up the network in the barn though or whose doing the coding.
	Appreciate 0 Quote

05-02-2014, 11:10 AM	#269
Turn In Concepts 10 Rep 172 Posts Drives: 335i Join Date: Jun 2010 Location: Cincinnati iTrader: (0)	1 day left! I have everything loaded up in the truck and everyone has confirmed their appointments so we are in good shape. We will be hitting the road shortly and resting up well tonight. Lot's of work ahead of us tomorrow and we are definitely looking forward to it. See you guys bright and early! -Kent
	Appreciate 0 Quote

05-03-2014, 02:06 PM	#272
Turn In Concepts 10 Rep 172 Posts Drives: 335i Join Date: Jun 2010 Location: Cincinnati iTrader: (0)	Making great progress today! I am going to be able to open up a couple more spots for walnut blasting tomorrow so if anyone would like to join in on the group buy feel free to give me a call to set it up. My cell number is 5138006858. -Kent
	Appreciate 0 Quote

05-03-2014, 03:58 PM	#273
J-Spec Dan ALL RIGHTY THEN 226 Rep 2,957 Posts Drives: 12 STX Advance Join Date: May 2011 Location: G O T H A M iTrader: (2)	Thanks to the TiC guys for driving up to MI this weekend. Thanks Brandon for setting this all up and of course, thanks to Steve for having a place for all the work to take place. __________________ BMW CCA Member 483866 \|Officially Official Build Thread\| \|Widebody Thread\| Follow me on instagram: @jspecdan
	Appreciate 0 Quote

05-03-2014, 06:34 PM	#274
dsjr2006 Captain 161 Rep 848 Posts Drives: '01 E39 540iA, '09 E90 M3 Join Date: May 2013 Location: Metro Detroit iTrader: (1) Garage List 2010 BMW 335i [0.00] 2001 BMW 540i [0.00]	__________________ E90 M3 DCT LCI \| E90 LCI N54 M-Sport(retired) \| E90 Technical Docs download: http://j.mp/bmwe90docs *good read, very detailed.
	Appreciate 0 Quote

05-03-2014, 06:40 PM	#275
elite. First Lieutenant 37 Rep 348 Posts Drives: e93 Join Date: May 2013 Location: home iTrader: (2)	should I be worried about my walnut blasting appt tomorrow.....concerned about the alcohol consumption tonight lol. how are your cars feeling that were walnut blasted today folks?
	Appreciate 0 Quote

05-03-2014, 07:53 PM	#276
charrigan Private First Class 8 Rep 154 Posts Drives: Fiat 500e, Audi Q5, 328d(soon) Join Date: Feb 2013 Location: Dexter, MI iTrader: (3)	I can't wait to get mine blasted. I think my timing pull on jb4 is related to dirty valves. Do I win a prize for dirtiest valves? As far as I know they haven't been touched in 117k miles :/
	Appreciate 0 Quote

05-03-2014, 11:13 PM	#279
Ovitrix335 Second Lieutenant 7 Rep 229 Posts Drives: Bmw 335i Join Date: Aug 2011 Location: Michigan iTrader: (11)	I had my valves walnut blasted today. The car feels better, very smooth. Thanks to TIC guys for great work. Nice guys to deal with. Looking forward to do more business with you guys. Thanks to Brandon and Steve to set this up. P.s. Steve, ease up on that beer bruh.. Lolllll ))) Nic
	Appreciate 0 Quote

05-04-2014, 03:00 AM	#280
e90Mark Captain 31 Rep 722 Posts Drives: 2008 BMW 335xi Join Date: Aug 2013 Location: Detroit iTrader: (5) Garage List 2008 BMW 335xi [10.00]	Fun meet today. Nice meeting everybody. The TIC guys are a great group of guys and do great work. Knocking out the cars well within the time slots. Wish I could comment on the difference of a walnut blast, but my car started throwing crazy misfires after changing the plugs and of course had no coils on hand. Have a full new set coming in this week.. The pictures Dan posted of valves are of my car. Here's another vid of the subarmw's.
	Appreciate 0 Quote

05-04-2014, 12:24 PM	#281
SP3333D First Lieutenant 32 Rep 339 Posts Drives: E90 Join Date: Jul 2013 Location: Detroit iTrader: (1) Garage List 2007 BMW 328xi [10.00]	__________________
	Appreciate 0 Quote

05-04-2014, 12:25 PM	#282
SP3333D First Lieutenant 32 Rep 339 Posts Drives: E90 Join Date: Jul 2013 Location: Detroit iTrader: (1) Garage List 2007 BMW 328xi [10.00]	my favorite part of the weekend tho __________________
	Appreciate 0 Quote

05-04-2014, 02:48 PM	#283
fastaction Second Lieutenant 19 Rep 248 Posts Drives: 335i Join Date: Oct 2009 Location: cleveland iTrader: (1)	Who knew servicing your BMW could be so much fun! Big thumbs up to Steve for hosting it. Kent and the TIC crew were all business and did a great job at an incredible price. Thanks to everyone who made this happen!! __________________ 07 328it
	Appreciate 1 Quote

05-04-2014, 06:21 PM	#286
SP3333D First Lieutenant 32 Rep 339 Posts Drives: E90 Join Date: Jul 2013 Location: Detroit iTrader: (1) Garage List 2007 BMW 328xi [10.00]	with as well as this worked out and as much fun as we had, we ought to do our own east side version of euro hanger. __________________
	Appreciate 0 Quote