[David1]

I have not used front plate in 20 plus years. 16 in Columbus. I have been stopped but no ticket but some areas here love to stop for it. Downtown the meter maids will ticket the car if parked on the street even with the plate in the window since that is not legal either

[DoctoRx]

Originally Posted by David1

I have not used front plate in 20 plus years. 16 in Columbus. I have been stopped but no ticket but some areas here love to stop for it. Downtown the meter maids will ticket the car if parked on the street even with the plate in the window since that is not legal either

Oh wow - I've been down to Cbus a few times and had no idea. I have never had a front plate on mine (or any of my cars for that matter).

[DRock3d]

Originally Posted by David1

I have not used front plate in 20 plus years. 16 in Columbus. I have been stopped but no ticket but some areas here love to stop for it. Downtown the meter maids will ticket the car if parked on the street even with the plate in the window since that is not legal either

Fuck the meter fairies, they are the only ones that care about the front plate.

[thompsac25]

If anyone needs sunglasses!
http://www.e90post.com/forums/showth...0#post20719440

[DRock3d]

Well boys, this car finally got me a speeding ticket 58 in a 40. 315 north of Hard road in Columbus.

[David1]

I have never seen a cop there and we use to fly on group drives up north on 315.

[David1]

Anyone going to the last cars and coffee of the season at Byers this Saturday? I will have the M2 there.

[DoctoRx]

Anyone happen to have a set of 513m or 219m wheels? I'm thinking of ordering a F30 BBK and my winter 193s won't clear.

[JimKW]

Originally Posted by eeng6k

New to Columbus. My car does not have the holes to put a front license plate. Do any of you guys drive around without a front plate?

Also looking for shops that will install parts that I buy online. I went to Best Motor Werks and they told me that they do not install parts that customers bring in.

My apartment also does not let me work on my car. Does anyone know where I can do small repairs without being bothered? Thanks.

I just had my fuel injectors installed at MAG. They were cheaper than Auto Assets and about the same as Evans Automotive. They both were willing to install them though. Best Motor Werks was not willing to install parts I bought.

[BMB063]

Originally Posted by eeng6k

New to Columbus. My car does not have the holes to put a front license plate. Do any of you guys drive around without a front plate?

Also looking for shops that will install parts that I buy online. I went to Best Motor Werks and they told me that they do not install parts that customers bring in.

My apartment also does not let me work on my car. Does anyone know where I can do small repairs without being bothered? Thanks.

I don't have holes or a front plate and refuse to put one on. Sometimes I put it in my front window if I'm worried because I've heard of Cbus cops cracking down about it.

And although your apt doesn't allow you to work on your car, doing a small repair shouldn't bother anyone. My last place said no repairs, and I did a few small things here and there and no one was bothered. Maybe not great advice, but no one objected.

[CTrink]

06' 330i here. Just saying hey. If anyone is in the Kent area send me a PM.

[redWhino]

Graphite e91 328i 6MT RWD PreLCI in Cincinnati saying hi. It's bone stock right now. Come spring I hope to have the three stage intake, AAW tune for a 330, and suspension refresh/upgrade. And some style 220's if I can convince my brother to upgrade the shoes on his e90 M3.

Anyways, cheers all!

[relinquish]

Does anyone in the Cleveland area know of reputable places that will do software programming (other than the dealer)?

[David1]

These are suspension parts I have left from my 09 335 coupe M-Sport that I no longer have. These parts came off the car at 1400 miles. I have:

M-sport springs front and rear
Front sway bar
Front struts with bump stops and dust covers
Front lower control arms with ball joints (these are not the torque arms)

$65

I am in Columbus

[David1]

I have two Mishimoto intercoolers that I did not use because they are imperfect and Mishimoto didn't want them back. They have fin packs that are not perfect (for me anyways) on the inside where the cores are welded together but most people would never look inside to notice and they should work fine. These are black with the factory style connectors.

PM for pics

$75 each
I am in Columbus

[David1]

Guys, Going through parts from cars I don't have any more. New never used chrome wheel bolts and locks $25. The unused front splitter $30. I tried to get this site to accept any size photos to no avail so I give up. PM me and I can email pics.

I am in Columbus

[swishersweets76]

I'm in the Akron area looking for an after hours BMW mechanic. Willing to pay cash. I have a 08 335xi just replaced plugs and coil packs, new valve cover gasket, and added a oil cooler. I have a JB4 G4 on it. It went in to limp mode so I changed the plugs and coils it is stilling kicking all these codes. It had a new HPFP put on two years ago at the dealer also had index 11 and 12 injectors put at the same time.

[raisingAnarchy]

Originally Posted by relinquish

Does anyone in the Cleveland area know of reputable places that will do software programming (other than the dealer)?

Late response because I'm not on this site much anymore, but Koala Motorsport is about a half hour east of downtown Cleveland and they are excellent. Another alternative that is closer to downtown is Larchmere Imports.

[raisingAnarchy]

Originally Posted by swishersweets76

I'm in the Akron area looking for an after hours BMW mechanic. Willing to pay cash. I have a 08 335xi just replaced plugs and coil packs, new valve cover gasket, and added a oil cooler. I have a JB4 G4 on it. It went in to limp mode so I changed the plugs and coils it is stilling kicking all these codes. It had a new HPFP put on two years ago at the dealer also had index 11 and 12 injectors put at the same time.

You could try TG Motorwerks based in Hudson area. Brian is a very nice guy and could at least point you in the right direction.

[MoeTE87]

Hey everyone!

I'm looking to buy 1 or two gently used 225/40/18 tires. No patches or plugs. Looking for even wear too.

Thank you,
Jeff

[prima_materia]

Canton, OH here. Haven't went to any meets or cruises in some years. I went to Superfly in Akron at the end of this past summer, which was a real nice turnout [with quite a few guys from ECS there with their 535's/335i's]. I went to a couple other small meets around the area too.

Also, SmokeysDyno hosts some nice get togethers occasionally, there's also Akron Cars n Coffee I believe.

I'd really like to plan a trip down to Mid Ohio Raceway at some point.

[silvergray545]

Originally Posted by PrimaMateria

Canton, OH here. Haven't went to any meets or cruises in some years. I went to Superfly in Akron at the end of this past summer, which was a real nice turnout [with quite a few guys from ECS there with their 535's/335i's]. I went to a couple other small meets around the area too.

Also, SmokeysDyno hosts some nice get togethers occasionally, there's also Akron Cars n Coffee I believe.

I'd really like to plan a trip down to Mid Ohio Raceway at some point.

Definitely recommend Mid-Ohio. I try to go as often as I can. Try to link up with the local BMWCCA or PCA to attend one of their events. Highly recommend them if you've never been to Mid-Ohio before.