BMW CODING success

xxxjecxxx · 06-20-2011, 10:58 AM

Quote:

Originally Posted by jphughan

Yep, here: http://www.ftdichip.com/Drivers/VCP.htm. Straight from the chip manufacturer. Can't vouch for whether they work or not though, because with stuff like this if the drivers I have do what I need them to do, I don't update just for the sake of updating.

Those are the ones, best ones you can use.

1QuikWS6 · 06-20-2011, 11:00 AM

Quote:

Originally Posted by xxxjecxxx

Those are the ones, best ones you can use.

Agreed

Those are the drivers I use - no problems whatsoever from beginning

Magic-Man · 06-20-2011, 08:37 PM

Quote:

Originally Posted by 4U2NV6

Downgrade to v39 or even v38. Just overwrite the ECU files nothing else.

I don't know what version it was, but I tried the old version & still no go. Couldn't find a working link to v38 or 39 on Google.

Anyone have one?

4U2NV6 · 06-20-2011, 09:24 PM

Quote:

Originally Posted by Magic-Man

I don't know what version it was, but I tried the old version & still no go. Couldn't find a working link to v38 or 39 on Google.

Anyone have one?

Swap out with the files from the first page link/DIY link.

xxxjecxxx · 06-20-2011, 11:13 PM

Quote:

Originally Posted by Magic-Man

I don't know what version it was, but I tried the old version & still no go. Couldn't find a working link to v38 or 39 on Google.

Anyone have one?

Yes, move your old three folders to a backup folder..download my NCSEXPERT.rar file and replace all three of them..

If you need to code a newer car or newer software update.. replace your old files back.

Magic-Man · 06-20-2011, 11:32 PM

Quote:

Originally Posted by xxxjecxxx

Yes, move your old three folders to a backup folder..download my NCSEXPERT.rar file and replace all three of them..

If you need to code a newer car or newer software update.. replace your old files back.

Tried that. Did not work. This is for a 2007.

xxxjecxxx · 06-21-2011, 12:05 AM

Quote:

Originally Posted by Magic-Man

Tried that. Did not work. This is for a 2007.

You have to copy and remove all three folders, and replace them with the ones in the .rar file..

I just did this an hour ago, works fine

Elliott@DetailAddict · 06-21-2011, 01:53 PM

Quote:

Originally Posted by Magic-Man

Tried that. Did not work. This is for a 2007.

Strange... I code 06-11 cars with v41 files. Maybe you did not do the data upgrade correctly. You should not have to switch.

bumere90 · 06-21-2011, 02:20 PM

I am getting this error message when I start Inpa

Elliott@DetailAddict · 06-21-2011, 02:40 PM

Make sure ignition is on. Make sure Latency is set to 1 not 16. Make sure tune is off.

bumere90 · 06-21-2011, 04:41 PM

How do I set Latency to 1? What do you mean by tune off?

antiks · 06-21-2011, 05:00 PM

Quote:

Originally Posted by bumere90

How do I set Latency to 1? What do you mean by tune off?

if you have procede/jb4 make sure it's set to bypass mode/off, etc..

Elliott@DetailAddict · 06-21-2011, 05:16 PM

Quote:

Originally Posted by antiks

if you have procede/jb4 make sure it's set to bypass mode/off, etc..

Exactly

Quote:

Originally Posted by bumere90

How do I set Latency to 1? What do you mean by tune off?

In the device manager under advanced settings for the comport.
It's pretty well described in the DIY. Have you followed that?

bumere90 · 06-21-2011, 06:56 PM

Thank you.
DIY didn't mention anything about setting Latency to 1.

This is the only part that I didn't understand what to do:
Ensure "use fifo uffers" option is marked and receive buffers and transmit buffers are both set to 8.

Elliott@DetailAddict · 06-21-2011, 07:49 PM

Ignore that. Just make sure latency is 1.
Test that.

Magic-Man · 06-21-2011, 08:25 PM

Quote:

Originally Posted by Grant@DetailAddict

Strange... I code 06-11 cars with v41 files. Maybe you did not do the data upgrade correctly. You should not have to switch.

Man, this software has been a PITA for me lol. I tried the older files once more & they decided to work for NFRM this time. So I am finally done coding everything I want. Thanks to everyone that helped me along the way.

bumere90 · 06-21-2011, 08:52 PM

Quote:

Originally Posted by Grant@DetailAddict

Ignore that. Just make sure latency is 1.
Test that.

Thanks a lot!
Now it works

matrix76 · 06-22-2011, 02:31 PM

Coding problem, I can read the ECU no problem but after I close it and then open the FSW_PSW.TRC it is BLANK, nothing to change and transfer to the FSW_PSW.MAN file

, Any ideas as to what has gone wrong???

Elliott@DetailAddict · 06-22-2011, 02:33 PM

Remake your profile and try again.

matrix76 · 06-22-2011, 03:59 PM

Quote:

Originally Posted by Grant@DetailAddict

Remake your profile and try again.

I'll give it a try, thank you

zeroXTC · 06-23-2011, 01:22 AM

Quote:

Originally Posted by Grant@DetailAddict

Make sure ignition is on. Make sure Latency is set to 1 not 16. Make sure tune is off.

Where do you set "tune" off?

Sea4tec · 06-23-2011, 08:09 AM

Hello from Portugal, i have just installed myself the Garmim 3790T bought from BMW GERMANY and mounted it on my E82 123D 09", i have gone to a BMW Dealer here in Portugal in order to code it (i thinks it needs the NAVP option installed in order for the sound to come out from the car speakers but they said they have never done that and that they have connect it to the computer and find no way to do that....i thing they just don´t know what they are doing... Can anyone give me some light about this? Many thanks!!!

06-21-2011, 02:20 PM	#2891
bumere90 Grozniy 195 Rep 2,602 Posts Drives: Carless Join Date: Jan 2009 Location: FL iTrader: (12)	I am getting this error message when I start Inpa __________________ -fatman
	Appreciate 0 Quote

06-21-2011, 02:40 PM	#2892
Elliott@DetailAddict Brigadier General 313 Rep 4,370 Posts Drives: E90 Join Date: May 2011 Location: Santa Clara, CA iTrader: (0)	Make sure ignition is on. Make sure Latency is set to 1 not 16. Make sure tune is off.
	Appreciate 0 Quote

06-21-2011, 04:41 PM	#2893
bumere90 Grozniy 195 Rep 2,602 Posts Drives: Carless Join Date: Jan 2009 Location: FL iTrader: (12)	How do I set Latency to 1? What do you mean by tune off? __________________ -fatman
	Appreciate 0 Quote

06-21-2011, 06:56 PM	#2896
bumere90 Grozniy 195 Rep 2,602 Posts Drives: Carless Join Date: Jan 2009 Location: FL iTrader: (12)	Thank you. DIY didn't mention anything about setting Latency to 1. This is the only part that I didn't understand what to do: Ensure "use fifo uffers" option is marked and receive buffers and transmit buffers are both set to 8. __________________ -fatman
	Appreciate 0 Quote

06-21-2011, 07:49 PM	#2897
Elliott@DetailAddict Brigadier General 313 Rep 4,370 Posts Drives: E90 Join Date: May 2011 Location: Santa Clara, CA iTrader: (0)	Ignore that. Just make sure latency is 1. Test that.
	Appreciate 0 Quote

06-22-2011, 02:31 PM	#2900
matrix76 Major 65 Rep 1,300 Posts Drives: 2020 Z4 M40i Black/Red Join Date: Sep 2009 Location: Port Dover, Ontario iTrader: (1)	Coding problem, I can read the ECU no problem but after I close it and then open the FSW_PSW.TRC it is BLANK, nothing to change and transfer to the FSW_PSW.MAN file , Any ideas as to what has gone wrong??? __________________ Brian Black Sapphire, Black w/Burrwood Trim & Shifter, 162's, Mtec H8 AE's, DS1 HID 6000K
	Appreciate 0 Quote

06-22-2011, 02:33 PM	#2901
Elliott@DetailAddict Brigadier General 313 Rep 4,370 Posts Drives: E90 Join Date: May 2011 Location: Santa Clara, CA iTrader: (0)	Remake your profile and try again.
	Appreciate 0 Quote

06-23-2011, 08:09 AM	#2904
Sea4tec New Member 1 Rep 11 Posts Drives: BMW 123D E82 Join Date: Apr 2011 Location: Lisboa, Portugal iTrader: (0)	Hello from Portugal, i have just installed myself the Garmim 3790T bought from BMW GERMANY and mounted it on my E82 123D 09", i have gone to a BMW Dealer here in Portugal in order to code it (i thinks it needs the NAVP option installed in order for the sound to come out from the car speakers but they said they have never done that and that they have connect it to the computer and find no way to do that....i thing they just don´t know what they are doing... Can anyone give me some light about this? Many thanks!!!
	Appreciate 0 Quote