All COBB Tuning AccessPORT Flash for N54 335i Discussion Here

Black Sheep · 12-08-2011, 01:27 PM

Quote:

Originally Posted by Brey335i

Stage 2+ really doesn't need anything to be called not-beta. I'm more interested in the race map while the weather is cool.

vasillalov · 12-08-2011, 02:14 PM

Quote:

Originally Posted by Brey335i

Stage 2+ really doesn't need anything to be called not-beta. I'm more interested in the race map while the weather is cool.

Sorry, but the boost, throttle and load graphs are still choppy at part throttle with Stage 2+ Aggressive maps. I've sent over 10 logs to Cobb confirming this.

Here is the latest one I've got:

HellsBells · 12-08-2011, 02:18 PM

Is there a stock throttle map for Stage 1 Aggressive? It looks like it is just linear 1 or 2? Am I wrong?

rader1 · 12-08-2011, 02:20 PM

Quote:

Originally Posted by vasillalov

Stage 2 and Stage 2+ will be out of Beta. Stock and linear throttle maps will be offered...

HellsBells · 12-08-2011, 02:26 PM

Quote:

Originally Posted by rader1

Yes, saw that, but is that on both stages or just Stage 2? Man I gotta get some DPs...

Zasquatch · 12-08-2011, 02:27 PM

Quote:

Originally Posted by vasillalov

Sorry, but the boost, throttle and load graphs are still choppy at part throttle with Stage 2+ Aggressive maps. I've sent over 10 logs to Cobb confirming this.

Here is the latest one I've got:

Agreed. I sent some as well. It appears that on some cars there is a boost control issue that will be worked out in the next release. My car was very bad on 2+, my BOV would blow off cyclicly until about 4500 RPM... rev, pssst, rev, pssst, rev, pssst, etc.

That being said, I can't wait to try out a bug free 2+ in the next release! Although by Monday my winter wheels will be on

JStang · 12-08-2011, 02:50 PM

Quote:

Originally Posted by sophistkao

So where can i get the alpha map stage 3 for updated turbos???
I had updated my turbos few month ago=.=

You have to be one of the chosen few who test their products before they are released to the general public.

Mr. Nice · 12-08-2011, 02:52 PM

Quote:

Originally Posted by sophistkao

So where can i get the alpha map stage 3 for updated turbos???
I had updated my turbos few month ago=.=

what did you go with?

ajsalida · 12-08-2011, 03:00 PM

Quote:

Originally Posted by HellsBells

Is there a stock throttle map for Stage 1 Aggressive? It looks like it is just linear 1 or 2? Am I wrong?

Yes there is a stock throttle stage 1 aggressive map.

enrita · 12-08-2011, 03:06 PM

Quote:

Originally Posted by sophistkao

So where can i get the alpha map stage 3 for updated turbos???
I had updated my turbos few month ago=.=

those are not even in beta but alpha. YOU dont want to run those since they are not even 80% done.
COBB is getting a RB turbo car inhouse soon so it will be easier for them to get out upped turbos maps.

themyst · 12-08-2011, 03:18 PM

Quote:

Originally Posted by enrita

those are not even in beta but alpha. YOU dont want to run those since they are not even 80% done.
COBB is getting a RB turbo car inhouse soon so it will be easier for them to get out upped turbos maps.

+1

import36 · 12-08-2011, 03:32 PM

Quote:

Originally Posted by vasillalov

A little birdie just told me to expect some news and updates from Cobb Tuning this coming Monday

Stage 2 and Stage 2+ will be out of Beta. Stock and linear throttle maps will be offered...

sweet news! very curious to feel the difference with the stock throttle maps....as i've only ran the Stg 2+ linear and Race maps.

Brey335i · 12-08-2011, 03:39 PM

Quote:

Originally Posted by Zasquatch

Agreed. I sent some as well. It appears that on some cars there is a boost control issue that will be worked out in the next release. My car was very bad on 2+, my BOV would blow off cyclicly until about 4500 RPM... rev, pssst, rev, pssst, rev, pssst, etc.

That being said, I can't wait to try out a bug free 2+ in the next release! Although by Monday my winter wheels will be on

Interesting. I haven't had any of these issues. Seems to be only for a select few... hopefully it gets ironed out with this release though.

Full-Race Geoff · 12-08-2011, 04:14 PM

im looking forward to this next update. getting closer to having proper fueling support for upgraded turbo setups!

805beemer · 12-08-2011, 06:31 PM

I'm running stage 2+ sport, and don't notice any boost occilations, but even with the linear throttle map at 4k rpm's I get a boost surge feeling kind of like the stock throttle map on stage 1 aggressive. Anyone else notice that? Ive looked at my logs and even sent them in to cobb and they said they look normal.

chrisdack · 12-08-2011, 07:00 PM

delete me

crypticc · 12-08-2011, 07:04 PM

Quote:

Originally Posted by 335iLondon

Nice to hear you got it working fine in the UK.
What map are you running?

I am about to push the order button myself, but get an annoying thought about missing canbus features of ...

Hi

Sport Linear for now. not quite sure of linear, but will give it a bit longer. Very progressive, but at lower engine speeds I understand why some people don't like it. Now it feels more like a NA car with more to explore through the whole rev range. probably I will up it to aggressive this w/e, it's just a bit damp at the mo, and well...basically, I'm chicken.

p.s. canbus features of... ?

nitehawk · 12-08-2011, 10:04 PM

How accurate are the boost readings currently on S2+?
Anyone know if this will be rectified with the official release?

ATL_E90 · 12-08-2011, 10:43 PM

Well, just got my AP tonight (thanks Jeff@TopGear!) and learned a good (albeit somewhat obvious in hindsight) lesson...

Jumped in the car installed the Stage 1 Aggressive map (we have 93 octane here so why not!) and went out for a quick test drive. As soon as I got on it, before even hitting WOT I had what turned out to be a bad misfire on cylinder 2. Engine shaking, stumbling, etc. Fortunately, in the back of my mind I was somewhat expecting something to go wrong and I immediately let off and eased it back home without further incident. Threw the stock ECU back on and did a test run on it, no problems at all.

Lesson learned is: spend your cash on making sure your car is in good shape before dropping it on the tune. At this stage, a lot of N54s out there have a good bit of mileage on them (I have 50k+) and could use some TLC. Most likely the misfire is being caused by massive carbon build-up and/or old plugs (CPO car). I'll spend as much as the tune cost getting that stuff taken care of and hopefully all will be well after that, but if you have any doubts about the shape your N54 is in, get it cleaned up before you get tuned up!

enrita · 12-09-2011, 01:44 AM

Quote:

Originally Posted by ATL_E90

Well, just got my AP tonight (thanks Jeff@TopGear!) and learned a good (albeit somewhat obvious in hindsight) lesson...

Jumped in the car installed the Stage 1 Aggressive map (we have 93 octane here so why not!) and went out for a quick test drive. As soon as I got on it, before even hitting WOT I had what turned out to be a bad misfire on cylinder 2. Engine shaking, stumbling, etc. Fortunately, in the back of my mind I was somewhat expecting something to go wrong and I immediately let off and eased it back home without further incident. Threw the stock ECU back on and did a test run on it, no problems at all.

Lesson learned is: spend your cash on making sure your car is in good shape before dropping it on the tune. At this stage, a lot of N54s out there have a good bit of mileage on them (I have 50k+) and could use some TLC. Most likely the misfire is being caused by massive carbon build-up and/or old plugs (CPO car). I'll spend as much as the tune cost getting that stuff taken care of and hopefully all will be well after that, but if you have any doubts about the shape your N54 is in, get it cleaned up before you get tuned up!

most likely plugs.

tscdennab · 12-09-2011, 05:18 AM

Hi,

This is a question for Cobb engineers (most likely) but other opinions are welcome.

Lately GIAC Stage 2 has become a bit "boring" for me. Don't get me wrong, it works perfectly with not even a hiccup. But I want to experiment with higher boost, different throttle settings, etc. and I am sure I will not be able to do this with GIAC. However GIAC works so good that I'm not prepared to switch entirely to another tune.

I wonder if it's possible to save my GIAC existing flash for later restore by installing the Cobb AccessPort over it ? I mean, instead of saving the OEM file for later restoring, the Cobb AP would save my existing GIAC flash for later restoring. Theoretically it should work, right ? Unless GIAC has some copy protection mechanism ?

And then I could experiment with Cobb AP to see if there is more power to be had on the dyno, etc. but without losing the ability to install my GIAC flash back (without sending my ECU to GIAC).

What do you think ?

enrita · 12-09-2011, 07:46 AM

Dont think is possible. Does not work for Dinan flash.
Get a JB4 and run it on top of GIAC with 1-2 psi overboost when meth is active.

Quote:

Originally Posted by tscdennab

Hi,

This is a question for Cobb engineers (most likely) but other opinions are welcome.

Lately GIAC Stage 2 has become a bit "boring" for me. Don't get me wrong, it works perfectly with not even a hiccup. But I want to experiment with higher boost, different throttle settings, etc. and I am sure I will not be able to do this with GIAC. However GIAC works so good that I'm not prepared to switch entirely to another tune.

I wonder if it's possible to save my GIAC existing flash for later restore by installing the Cobb AccessPort over it ? I mean, instead of saving the OEM file for later restoring, the Cobb AP would save my existing GIAC flash for later restoring. Theoretically it should work, right ? Unless GIAC has some copy protection mechanism ?

And then I could experiment with Cobb AP to see if there is more power to be had on the dyno, etc. but without losing the ability to install my GIAC flash back (without sending my ECU to GIAC).

What do you think ?

12-08-2011, 02:18 PM	#2907
HellsBells Private First Class 5 Rep 185 Posts Drives: 335xi Join Date: May 2011 Location: Maryland iTrader: (1)	Is there a stock throttle map for Stage 1 Aggressive? It looks like it is just linear 1 or 2? Am I wrong?
	Appreciate 0 Quote

12-08-2011, 04:14 PM	#2918
Full-Race Geoff New Member 9 Rep 11 Posts Drives: lots Join Date: Dec 2011 Location: phoenix, az iTrader: (0)	im looking forward to this next update. getting closer to having proper fueling support for upgraded turbo setups!
	Appreciate 0 Quote

12-08-2011, 06:31 PM	#2919
805beemer Captain 23 Rep 647 Posts Drives: 2008 135i Join Date: Jul 2011 Location: Lompoc, CA iTrader: (4)	I'm running stage 2+ sport, and don't notice any boost occilations, but even with the linear throttle map at 4k rpm's I get a boost surge feeling kind of like the stock throttle map on stage 1 aggressive. Anyone else notice that? Ive looked at my logs and even sent them in to cobb and they said they look normal.
	Appreciate 0 Quote

12-08-2011, 07:00 PM	#2920
chrisdack Enlisted Member 19 Rep 48 Posts Drives: 335 Join Date: Jan 2007 Location: London iTrader: (0)	delete me __________________ e92 335i M-Sport Le Mans Blue 193 8/8.5Jx18
	Appreciate 0 Quote

12-08-2011, 10:04 PM	#2922
nitehawk Lieutenant Colonel 111 Rep 1,909 Posts Drives: e92 335i 6MT Join Date: May 2011 Location: Toronto iTrader: (15) Garage List E92 BMW 335i [9.00] E92 BMW 335i \| Retired [10.00]	How accurate are the boost readings currently on S2+? Anyone know if this will be rectified with the official release?
	Appreciate 0 Quote

12-08-2011, 10:43 PM	#2923
ATL_E90 New Member 0 Rep 17 Posts Drives: 2007 E90 335i Join Date: Oct 2010 Location: Atlanta iTrader: (2)	Well, just got my AP tonight (thanks Jeff@TopGear!) and learned a good (albeit somewhat obvious in hindsight) lesson... Jumped in the car installed the Stage 1 Aggressive map (we have 93 octane here so why not!) and went out for a quick test drive. As soon as I got on it, before even hitting WOT I had what turned out to be a bad misfire on cylinder 2. Engine shaking, stumbling, etc. Fortunately, in the back of my mind I was somewhat expecting something to go wrong and I immediately let off and eased it back home without further incident. Threw the stock ECU back on and did a test run on it, no problems at all. Lesson learned is: spend your cash on making sure your car is in good shape before dropping it on the tune. At this stage, a lot of N54s out there have a good bit of mileage on them (I have 50k+) and could use some TLC. Most likely the misfire is being caused by massive carbon build-up and/or old plugs (CPO car). I'll spend as much as the tune cost getting that stuff taken care of and hopefully all will be well after that, but if you have any doubts about the shape your N54 is in, get it cleaned up before you get tuned up! Last edited by ATL_E90; 12-08-2011 at 11:00 PM..
	Appreciate 0 Quote

12-09-2011, 05:18 AM	#2925
tscdennab Banned 162 Rep 1,809 Posts Drives: BMW 335i Join Date: Oct 2010 Location: Europe iTrader: (0) Garage List 2008 BMW [6.24]	Hi, This is a question for Cobb engineers (most likely) but other opinions are welcome. Lately GIAC Stage 2 has become a bit "boring" for me. Don't get me wrong, it works perfectly with not even a hiccup. But I want to experiment with higher boost, different throttle settings, etc. and I am sure I will not be able to do this with GIAC. However GIAC works so good that I'm not prepared to switch entirely to another tune. I wonder if it's possible to save my GIAC existing flash for later restore by installing the Cobb AccessPort over it ? I mean, instead of saving the OEM file for later restoring, the Cobb AP would save my existing GIAC flash for later restoring. Theoretically it should work, right ? Unless GIAC has some copy protection mechanism ? And then I could experiment with Cobb AP to see if there is more power to be had on the dyno, etc. but without losing the ability to install my GIAC flash back (without sending my ECU to GIAC). What do you think ?
	Appreciate 0 Quote