[jojo1211]

do you make comfort access harness for e65?

[dumitru.o]

hi,

i would be able to do it. i think i told you the price

thanks

[datbimmer]

Originally Posted by dumitru.o

hi,

i would be able to do it. i think i told you the price

thanks

Hi,
Does your harness you make need anything else or does it come with everything to install such as wire taps or whatever else is needed ? What is your price shipped to Canada?

[dumitru.o]

hi

the wiring come with everything you need to install it in the car. what s not included is the door wiring which can be ordered as new from BMW. please send me a PM with your VIN

thanks

[RedKnight]

Originally Posted by dumitru.o

hi

the wiring come with everything you need to install it in the car. what s not included is the door wiring which can be ordered as new from BMW. please send me a PM with your VIN

thanks

How much do you charge to make a harness. I try to PM you but it says it's full. I have an e90 pre lci 330xi with idrive. Is your harness the door harness or something else. I found the door handle, key, the module, and three antenna. Do I also need to find the door harness? Thanks

[RedKnight]

Originally Posted by dumitru.o

hi

the wiring come with everything you need to install it in the car. what s not included is the door wiring which can be ordered as new from BMW. please send me a PM with your VIN

thanks

How much do you charge to make a harness. I try to PM you but it says it's full. I have an e90 pre lci 330xi with idrive. Is your harness the door harness or something else. I found the door handle, key, the module, and three antenna. Do I also need to find the door harness? Thanks

[KOSTAS109]

hello,is available for 01/07 model or need replace cas unit?

[dumitru.o]

hi guys,

all the answers can be found here: https://www.e90post.com/forums/showp...&postcount=285

nobody has to replace the CAS unless it has been tampered.

PM replied

thanks

[DROP]

HI dumitru.o.

How much do you charge to make a harness and KEY for a E90 2006/2007?

Thanks

[dumitru.o]

please send me a PM with your VIN and country

thanks

[wilkielo]

Originally Posted by dumitru.o

New key being sent to HongKong

Thank you Dumitru.o

I got the key but it didn't work at first. I tried every method like changing the battery, installing CA module and the antenna and coding CAS and CA. It took me a few months to figure out why it didn't work. I have 3 original keys. The local dealer disabled all key positions in CAS except my 3 keys. So when you sell me the 4th key, it didn't work. Today I use tool32 to enable key position 4 and now it works and I am so happy with it. Thank you.

[Hiroyue]

So starting to get my part list ordered I’m having an issue tracking down the wiring harness’ for the doors http://www.realoem.com/bmw/enUS/show...diagId=61_1945 the ones here don’t seem to have the CA even the ones I’ve been looking at eBay doing vin decoder I’m not having luck so far part numbers would be much appreciated. I guess I’m also stuck on do I need harness’ that match my options I have auto folding, auto dip, diming, memory seats

[PichaDis11]

Originally Posted by Hiroyue

So starting to get my part list ordered I’m having an issue tracking down the wiring harness’ for the doors http://www.realoem.com/bmw/enUS/show...diagId=61_1945 the ones here don’t seem to have the CA even the ones I’ve been looking at eBay doing vin decoder I’m not having luck so far part numbers would be much appreciated. I guess I’m also stuck on do I need harness’ that match my options I have auto folding, auto dip, diming, memory seats

You are basically looking for, Drivers Side 61126938215 & Passenger 61126947096. If you look them up on Ecstuning you can see up close shots to confirm.

As an option, you can edit your current harness to add CA functions. Would be a little more work though.

[Hiroyue]

Thanks picha, anyone disagree with those part numbers? Found a 61126938215 with vin p101259 but CA is not in the options list in the vin decoder

[dumitru.o]

when you look for the door wiring part #, don t look for CA option because you won t find it there. any new door wiring will have the plug for CA handle included so you need to order your door wiring according the the options listed in the catalog (if you have them or not). for the driver's side there is only one part #, only the passenger's side have different wiring depending on certain options (mirrors, memory etc. )

[Hiroyue]

So in the middle of wiring up my car and I’m at a stall point, how the hell do I run the wiring for the Ariel sensor from the trunk to the 3rd brake and reading pierre’s guide I have a sedan so I should be using pin3 on the plug but it’s taken already. Guide said pin1 was only for e92 and coupes

Originally Posted by Pierre26

You have to remove the rear roof light to see the antenna diversity module which is backward and you will see this:


same side view where the connector 1 (on the left) contains 6 pins where each one is (Pin assignments):
Types abbreviations: A = Output - E = Input - M = Earth - V = Supply
Pin Type Description
1 E Signal from CA control unit (CA: Comfort Access) to remote control receiver
2 M Earth.
3 V Power supply (terminal RAD_ON)
4 E Terminal 30 (power supply for remote control receiver)
5 --- Not used
6 A Signals from remote control receiver to Car Access System (CAS)

The pin 1 is the nearest from you or at the upper part on the pic and will miss if the CA module is missing in your trunk.
But don't dream i 've also a 2009 with comfort pack which didn't have the comfort access included ... So i did it !

[blingers]

Originally Posted by Hiroyue

So in the middle of wiring up my car and I’m at a stall point, how the hell do I run the wiring for the Ariel sensor from the trunk to the 3rd brake and reading pierre’s guide I have a sedan so I should be using pin3 on the plug but it’s taken already. Guide said pin1 was only for e92 and coupes

sedan should be pin 1

[Hiroyue]

Thanks I did just go ahead and wire it for pin 1 everything else I could find kind of pointed to that, once the c pillar is pulled off fishing the wiring up to it is pretty easy without removal of the headliner for anyone thinking it will be difficult.

[Hiroyue]

Alright all wired up now started to test fit a lot of the electronics and plugs to make sure the car is good, and my master switch on the driver side lights up but is not working, the car cranks but no start and I can unlock the car but not lock it, I didn’t cut anything on my harness other than 3 mini vampires. Any suggestions? Have power lights etc. thinking it may be the JBE I get clicks for unlocking working properly but not locking, just cranks no start tire pressure light is flashing on and off and a random what looks like the roof of a car with a exclamation point. No radio or hvac but the radio has backlighting.

-Update car did not start because of a plug harness that came loose when dropping the fuse panel once connections and pins were fit correctly car started.

[dumitru.o]

if it cranks but doesn t start might be the sync between CAS and DME. check everything you have done , if you unplug the module, all the wires install by you should not interfere with the car

a diagnose with ISTA will light things up

[Dubstar]

Hi,
can you make a Harness for a E81?

[dumitru.o]

Hi

Yes, I can.

Thanks