VRSF Intercooler has Arrived and Installed

924er · 02-23-2015, 07:27 PM

I get like a 7 degree rise on a 3rd gear pull is that ok?

Sgop335 · 02-23-2015, 08:51 PM

Quote:

Originally Posted by Tiago@VRSF

The stepped unit actually does offer a noticable cooling difference vs the regular 5" we offered in the past. Any increase in surface area will help reduce intake temps. Now whether or not that reduction is worth it to you if you're just doing a few occasional pulls is subjective

There is no noticeable lag when going from the stock 5" to the 7", the difference is within 50-60rpms on paper and not noticeable while driving

I always recommend going with the largest intercooler that fits your requirements. Anyone going FBO will benefit from a 7", stock turbos, upgraded twins or single.

Cool, thank you may get the stepped 5 and sell the 7. Does the stepped 5 use the same hose comnections as 7?

sw1183 · 03-30-2015, 07:51 PM

Just installed my 7" FMIC from VRSF. Tiago replied very promptly when I had questions and I'm very happy after multiple pulls! Lowered IAT around -20 degrees and the pull in higher RPMs is noticeable and feels very strong!

Pics attached.

View post on imgur.com

N55 E90xi, jb4 ISO e85, e50 fuel, VRSF downpipes & 7 FMIC, Alpina flash, BMS CAI & OCC

Eat.Sleep.Race · 03-30-2015, 08:24 PM

Awesome!! Looks great

Eurocraze · 04-01-2015, 01:18 PM

this is goin to be my next mod...like, today. anyone got pics of the 5" stepped installed?

Tiago@VRSF · 04-01-2015, 05:19 PM

Here's a picture of the 5" installed with an Arkym front bumper:

idratherbesurfing · 04-01-2015, 06:47 PM

Quote:

Originally Posted by Tiago@VRSF

Here's a picture of the 5" installed with an Arkym front bumper:

That is freakin mean looking. Woooo

CantCatchMe · 04-03-2015, 03:21 PM

Heads up to those with Msport E92 N55, you have to do more than trimming the shroud for the 7" IC. The whole plastic piece has to be cut off and trim the side of the shroud that's connected to the left and right piece.

jcarv20s · 06-22-2015, 11:00 AM

Tiago - Can you send me an update on my order? I sent a couple e-mails.

Turbod · 07-08-2015, 01:39 AM

Quote:

Originally Posted by CantCatchMe

Heads up to those with Msport E92 N55, you have to do more than trimming the shroud for the 7" IC. The whole plastic piece has to be cut off and trim the side of the shroud that's connected to the left and right piece.

I have a Msport E92 and plan to pick up the 7 inch here pretty soon. Can you elaborate a little more on what else you had to trim? I don't really follow what you mean.

Billit335 · 07-08-2015, 02:20 AM

Quote:

Originally Posted by Tiago@VRSF

Here's a picture of the 5" installed with an Arkym front bumper:

Any issues fitting it on the Arkym front apron, as I plan on putting an Arkym front apron on my 335.

Tiago@VRSF · 07-08-2015, 07:53 AM

Quote:

Originally Posted by MTsky

I have a Msport E92 and plan to pick up the 7 inch here pretty soon. Can you elaborate a little more on what else you had to trim? I don't really follow what you mean.

Only the black plastic shroud in front of the intercooler needs to be trimmed. The bumper or fan shroud should be untouched.

Quote:

Originally Posted by Billit335

Any issues fitting it on the Arkym front apron, as I plan on putting an Arkym front apron on my 335.

No sir, fits perfectly with the Arkym.

mike@x-ph.com · 07-09-2015, 12:25 PM

Quote:

Originally Posted by Tiago@VRSF

Here's a picture of the 5" installed with an Arkym front bumper:

Looks awesome

Tiago@VRSF · 07-09-2015, 09:55 PM

Quote:

Originally Posted by mike@x-ph.com

Looks awesome

The car looks great, he's actually got a few newer shots up on instagram if anyone's interested:

https://instagram.com/byzzness/

mike@x-ph.com · 07-09-2015, 09:59 PM

Quote:

Originally Posted by Tiago@VRSF

The car looks great, he's actually got a few newer shots up on instagram if anyone's interested:

https://instagram.com/byzzness/

Can you please ask him if we can use these pictures as well?

datbimmer · 06-26-2016, 04:16 AM

Where are the install pics ?

JLIT · 03-13-2017, 11:46 PM

Just did the trimming needed for my 08 335i to accommodate the 7" FMIC. I got the upgraded lower charge pipes and have been looking for a solid guide to do the final needed steps to get this installed. Anybody have any recommendations for step by step guides? Did the google search, you tube etc and couldn't find a guide that mirrored my set up.

Tiago@VRSF · 03-14-2017, 09:28 AM

The lower chargepipe is pretty easy, just remove the driver side pipe, insert the lower chargepipe, tighten the clamps on the intercooler and chargepipe side. Nothing fancy

JLIT · 03-14-2017, 06:38 PM

Quote:

Originally Posted by Tiago@VRSF

The lower chargepipe is pretty easy, just remove the driver side pipe, insert the lower chargepipe, tighten the clamps on the intercooler and chargepipe side. Nothing fancy

Thanks for the response sir! Are the couplers for the passenger side or for that lower charge pipe driver side? Or is that just the standard lower charge pipe, and since I got the ugpraded, it's not applicable?Apologies for the newb questions.

Tiago@VRSF · 03-14-2017, 06:47 PM

You use the straight coupler for the passenger side and the 90 degree coupler for the driver side. The lower chargepipe goes in between the 90 degree coupler and the upper chargepipe's coupler.

JLIT · 03-14-2017, 06:54 PM

Everything sounds straight forward in respect to which couplers go where. My only confusion as for your response related to the lower charge pipe going in between larger charge pipe and 90 degree coupler.

Tiago@VRSF · 03-14-2017, 07:04 PM

Upper chargepipe to coupler, to lower chargepipe to coupler to intercooler

02-23-2015, 07:27 PM	#287
924er Colonel 351 Rep 2,049 Posts Drives: e92 335i '10 Join Date: Feb 2014 Location: Socal iTrader: (0)	I get like a 7 degree rise on a 3rd gear pull is that ok? __________________ '10 e92 N54 DCI intakes, ER chargepipe, TIAL BOV, VRSF 5in FMIC, BMS Downpipes COBB e30
	Appreciate 0 Quote

03-30-2015, 07:51 PM	#289
sw1183 Private First Class 34 Rep 150 Posts Drives: 2013 BMW M6 Join Date: Mar 2012 Location: IN iTrader: (1) Garage List 2011 BMW 335xi [0.00]	Just installed my 7" FMIC from VRSF. Tiago replied very promptly when I had questions and I'm very happy after multiple pulls! Lowered IAT around -20 degrees and the pull in higher RPMs is noticeable and feels very strong! Pics attached. View post on imgur.com View post on imgur.com N55 E90xi, jb4 ISO e85, e50 fuel, VRSF downpipes & 7 FMIC, Alpina flash, BMS CAI & OCC __________________ 2013 BMW M6 HCP e85 tune, VRSF DP, BMW CAI
	Appreciate 0 Quote

03-30-2015, 08:24 PM	#290
Eat.Sleep.Race Out Boosting... 248 Rep 3,987 Posts Drives: F30 335i M-Sport Join Date: Feb 2014 Location: Northern VA iTrader: (7)	Awesome!! Looks great __________________ Alpine White M-Sport F30
	Appreciate 0 Quote

04-01-2015, 01:18 PM	#291
Eurocraze Custom User Title 50 Rep 247 Posts Drives: 09 335i Join Date: Dec 2012 Location: San Diego iTrader: (2)	this is goin to be my next mod...like, today. anyone got pics of the 5" stepped installed?
	Appreciate 0 Quote

04-01-2015, 05:19 PM	#292
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	Here's a picture of the 5" installed with an Arkym front bumper:
	Appreciate 0 Quote

04-03-2015, 03:21 PM	#294
CantCatchMe Lieutenant Colonel 339 Rep 1,744 Posts Drives: 2012 335i xdrive msport(E92) Join Date: Aug 2014 Location: West Bloomfield, MI iTrader: (2)	Heads up to those with Msport E92 N55, you have to do more than trimming the shroud for the 7" IC. The whole plastic piece has to be cut off and trim the side of the shroud that's connected to the left and right piece.
	Appreciate 0 Quote

06-22-2015, 11:00 AM	#295
jcarv20s Second Lieutenant 19 Rep 210 Posts Drives: 2014 435i Join Date: Apr 2012 Location: Danbury, CT iTrader: (0)	Tiago - Can you send me an update on my order? I sent a couple e-mails.
	Appreciate 0 Quote

06-26-2016, 04:16 AM	#302
datbimmer Wastegate Rattle 115 Rep 897 Posts Drives: 335i m6t nav sport Join Date: Dec 2013 Location: Canada iTrader: (0)	Where are the install pics ? __________________ 2007 335i E92 Sport, CIC, 6MT, DOCRACE6266 Spacegray/Black 2009 335i xDrive Black/Black Nav AT Individual Gf: 2011 335i Xdrive Mpack,Nav AT Alpine/SaddleBrown
	Appreciate 0 Quote

03-13-2017, 11:46 PM	#303
JLIT Private 14 Rep 59 Posts Drives: 2015 M235i Join Date: Feb 2014 Location: Los Angeles iTrader: (0) Garage List 2015 BMW M235i [0.00] 2008 BMW 335i [0.00]	Just did the trimming needed for my 08 335i to accommodate the 7" FMIC. I got the upgraded lower charge pipes and have been looking for a solid guide to do the final needed steps to get this installed. Anybody have any recommendations for step by step guides? Did the google search, you tube etc and couldn't find a guide that mirrored my set up.
	Appreciate 0 Quote

03-14-2017, 09:28 AM	#304
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	The lower chargepipe is pretty easy, just remove the driver side pipe, insert the lower chargepipe, tighten the clamps on the intercooler and chargepipe side. Nothing fancy
	Appreciate 0 Quote

03-14-2017, 06:47 PM	#306
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	You use the straight coupler for the passenger side and the 90 degree coupler for the driver side. The lower chargepipe goes in between the 90 degree coupler and the upper chargepipe's coupler.
	Appreciate 0 Quote

03-14-2017, 06:54 PM	#307
JLIT Private 14 Rep 59 Posts Drives: 2015 M235i Join Date: Feb 2014 Location: Los Angeles iTrader: (0) Garage List 2015 BMW M235i [0.00] 2008 BMW 335i [0.00]	Everything sounds straight forward in respect to which couplers go where. My only confusion as for your response related to the lower charge pipe going in between larger charge pipe and 90 degree coupler.
	Appreciate 0 Quote

03-14-2017, 07:04 PM	#308
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	Upper chargepipe to coupler, to lower chargepipe to coupler to intercooler
	Appreciate 0 Quote