[pcjackson06]

Originally Posted by 335iAP

Spent the past few weeks refreshing the interior a bit. Swapped my aluminum trim for bamboo anthracite. Need to plug that gap in the center trim, bought m3 trim without realizing it had extra buttons. Thought about maybe putting a valentine one concealed display there and having a surround 3D printed, or maybe a display for something else. If you've got any ideas lmk

Which steering wheel is that?

[335iAP]

Originally Posted by Fundguy1

Valentine, radar jammer control, bass level control for a sub, aftermarket alarm indicator, air ride controls, phone holder or USB outlets, etc. Depends on your needs.

Thought about USB outlets too. Don't even speed much but a valentine was all I could really think of.

Originally Posted by pcjackson06

Which steering wheel is that?

It's a wrapped sport steering wheel.

[mantis]

Originally Posted by Welcome to NBA Jam

Whole lot of coding!

1. Flashed DME to the BMW Performance Power Kit for $0!

2. Coded the following:

- Mirrors fold on lock with comfort access
- Velocity display on OBC
- Brake lights flash at 5hz when ABS is activated
- Removed iDrive disclaimer
- Enabled weather band on radio
- Removed driver seat belt chime
- Disabled key fob opening all windows
- Enabled key fob closing all windows
- Windshield wipers will fully finish wiping and park at the bottom of the windshield if they are mid-wipe while turning the engine off
- Soft-on for welcome home lighting with license plate lights
- Changed CBS maintenance display to show only mileage, not dates, for brake pad wear
- Attempted to turn on spark plug CBS and tried to set oil/brakes to a percentage instead of mileage, but all appear to be not fully supported and just show blank values
- Fogs on with high beams
- Fogs on with flash to pass
- Double blink hazard lights

And other stuff that I don't remember. I'm going to play more with each module this weekend. There are so many hidden and bizarre options! It's like BMW engineers thought of *everything* for the individual modules in our cars.

but this stuff, yes where do i start? how ?

[overdrivex]

Dreamed about it because I miss it...its been at the shop. Hopefully I can get it back this week...

[Greyfox]

Changed oil and filter, drained and filled transmission, drained and filled transfer case..... and now getting ready to wash it.

[justalilbit]

After months and months of planning, parts searching, research... a long couple days of assembly, I finished the "installation" phase of an LCI headlight & M sport bumper retrofit.

Only to find out I need an LCI hood latch (Edit: nevermind, I'm just dumb and forgot the two catches)

Only crappy picture I have right now, I've been too busy

[feuer]

Originally Posted by justalilbit

Only to find out I need an LCI hood latch

Good job! Lot better than this

[NiNeTyOne]

New fluid & filter in the transmission, & diffs. Used Liqui Moly Top Tech 1200 full synthetic Dextron 6, and the full synthetic Liqui Moly 75w140 Hypoid gear oil.

Flushed the coolant with OE BMW coolant & distilled water as well.

Car runs awesome, transmission shifts amazing in both Sport & D, and manual is smooth as silk.

Old fluid wasn't too bad (still a bit redish and not totally opaque), but it was time. No burnt smell so my clutch packs are likely still going strong.

Sending a sample off to Blackstone Labs for a look, hopefully no nasty surprises.

[Bimmer 808]

Weight reduction and battery registration.

[hellokitty]

Originally Posted by Bimmer 808

Weight reduction and battery registration.

How come not the Braille battery? only 15 lbs

[Soles330i]

Originally Posted by Eat92nuggets

I'm getting my new roundels in on Tuesday. Can't wait to install as well!

have to say it was one of the easiest - and one of the most aesthetically pleasing mods.

[Eat92nuggets]

Originally Posted by Soles330i

have to say it was one of the easiest - and one of the most aesthetically pleasing mods.

Which roundels did you get? Mine got delayed until Thursday. I had some CF ones before and it's much more aggressive but they got stolen while I was parked downtown one day. Replacing my stock ones with CF again. Thought about the all black ones but they were much more of a wait. Maybe next time.

[hellokitty]

Originally Posted by Eat92nuggets

Which roundels did you get? Mine got delayed until Thursday. I had some CF ones before and it's much more aggressive but they got stolen while I was parked downtown one day. Replacing my stock ones with CF again. Thought about the all black ones but they were much more of a wait. Maybe next time.

Where do you get those?

[Eat92nuggets]

Originally Posted by hellokitty

Where do you get those?

Amazon pretty decent price too

[randi41]

Dealer installed new evaporator and changed the rear brakes.

[Soles330i]

Originally Posted by Eat92nuggets

Which roundels did you get? Mine got delayed until Thursday. I had some CF ones before and it's much more aggressive but they got stolen while I was parked downtown one day. Replacing my stock ones with CF again. Thought about the all black ones but they were much more of a wait. Maybe next time.

black and titanium to match the rest of the ride. i did the front, rear and the steering wheel.

where are u ordering them from that there is such a delay?

[Eat92nuggets]

Originally Posted by Soles330i

black and titanium to match the rest of the ride. i did the front, rear and the steering wheel.

where are u ordering them from that there is such a delay?

Just from Amazon. The product was completely different than the picture though. Picture was real carbon fibre weave but it was just a sticker so I'm not sure if I'll put them on. Do you have a pic of yours? That sounds pretty nice

[Soles330i]

Originally Posted by Eat92nuggets

Just from Amazon. The product was completely different than the picture though. Picture was real carbon fibre weave but it was just a sticker so I'm not sure if I'll put them on. Do you have a pic of yours? That sounds pretty nice

sure ill be able to upload in a few. gonna head out for lunch and will snap a pic when i get there
FYI i got mine from DDMTUNING out here in San Diego.

[zooch7]

Removed JB4 and switching to MHD tune!! Also painted enine cover and intake cover BMW blue.

[NiNeTyOne]

Touched up the alignment. Wasn't happy with it and now it's a lot better. Front and rear toe were minimal, but more in front so the car was unhappy and tramlined like a drunken schoolgirl.

Got the front:rear toe ratio dialed in while I supervised from inside the car to insure proper weight distribution and it's much better now.

Was REALLY nice to be able to see the toe and camber numbers move around with my weight in and out of the car.

I've always aligned with 170# in the driver seat, but seeing the numbers is an eye opener.

[OnlyDriveGerman]

Got home to find out I'm not installing my Depo LCI tail lights as FedEx is clearly a bunch of douche bags and don't deliver the day the tracking claimed they would deliver by. I guess one more day won't kill me...

[N54Twin]

Got my CID to complete my NBT retrofit.

Waiting on my NBT emulator.