[daniel3ooo]

Originally Posted by xsboost

I've ordered from these guys before and found them pretty straight up and down. Communication on this thread is pretty lousy though. As soon as a few more of you recieve yours okay, i'm going to order.

+10000 as soon as everyone gets theirs and as long as they fit well I'm going to order a set

[Frank@M-Force_Design]

Start shipping out side skirts
Already sent tracking number to several people..

[B-Varise]

Originally Posted by Frank@M-Force_Design

Start shipping out side skirts
Already sent tracking number to several people..

Frank,

I think you forgot to send my tracking number out with the several others that went out. Please check again

[Zimo]

Just received my refund. Thanks for the help Frank and M-force.

[ThorsHammer]

Frank, I need a tracking number or a refund, period. I have been paid in full since the beginning of the year, and Mach told me I would be in the first batch.

Give me details, or give me my money back.

[stimpy]

Originally Posted by ThorsHammer

Frank, I need a tracking number or a refund, period. I have been paid in full since the beginning of the year, and Mach told me I would be in the first batch.

Give me details, or give me my money back.

"Hey Pat just ignore that guy until we have something to give him"

[shiggy]

Originally Posted by Frank@M-Force_Design

Start shipping out side skirts
Already sent tracking number to several people..

that was awfully vague....

[stimpy]

So who got tracking numbers?

[MMAJNKE]

wow seriously you guys waited a year for skirts? Wack!

[kyleb350]

Frank, on the 6/24 you e-mailed that mine would ship out "very soon". I'd appreciate a more specific answer.

[Former_Boosted_IS]

Got my tracking number and FedEX says mine should arrive today. I have tested every single set so far, so this will be my third try. I was very clear last time, that the tabs or clips on the rear did not fit correctly despite what others stated. I will be honest again and like the rest of you I am very hopeful.

It does need a signature, so hopefully I am there!

EDIT: Great they tried to deliver and I was not home. I will try to get it figured out tonight, so I can get them tomorrow.

[joec500]

Originally Posted by Former_Boosted_IS

Got my tracking number and FedEX says mine should arrive today. I have tested every single set so far, so this will be my third try. I was very clear last time, that the tabs or clips on the rear did not fit correctly despite what others stated. I will be honest again and like the rest of you I am very hopeful.

It does need a signature, so hopefully I am there!

EDIT: Great they tried to deliver and I was not home. I will try to get it figured out tonight, so I can get them tomorrow.

With FedEx I think you can actually call them up and arrange for pickups at their depo before they close the same night which is usually around 7:30-8 GOOD LUCK!

[Former_Boosted_IS]

Originally Posted by joec500

With FedEx I think you can actually call them up and arrange for pickups at their dept before they close the same night which is usually around 7:30-8 GOOD LUCK!

That is going to be my goal. I feel an obligation because so many people here want to know about fitment including me. I will do everything in my power to get these today and get at least one tested fitted.

[XYR03]

got my sides! after long ass time waiting now putting on...

[ThorsHammer]

Originally Posted by XYR03

got my sides! after long ass time waiting now putting on...

Wow congratulations.

I am "guaranteed" either a tracking number or a refund by Tuesday.

Did you actually already have a tracking number?

[cn555ic]

Originally Posted by XYR03

got my sides! after long ass time waiting now putting on...

Keep us posted....I hope and pray that everything is perfect for everyone, and we all can move on with these! Lets here some good news

[XYR03]

lol wheres the DIY??

[ThorsHammer]

Originally Posted by XYR03

lol wheres the DIY??

Post #211 in this thread.

Or here: http://www.e90post.com/forums/showthread.php?t=189332

[Former_Boosted_IS]

I have been going through in my head what I was going to say if they fit. I really had everything down nicely, well unfortunately....

Just kidding, THEY FIT!!! I just finished the driver's side and here is what I noted:

1. NO bulge on the rear section
2. The clips slide in perfectly, just like OEM
3. The front came up 1-2 mm short, but not noticeable
4. The material is FAR superior to the last mold. Night and day difference
5. Paint appears to be a spot on match

The two problems I encountered were:

1. The holes were the plastic screws go in under the side skirt were not matched up perfectly
2. The front where the skirt meets the fender liner has a small gap.

With respect to the gap, I am not sure if M-Force can make that area longer or we can just gap it with fender liner.

I will have more info later. You guys know I have been honest and critical when appropriate. The truth is M-Force Design finally did it. This is not 100%, but very acceptable to me.

Now, I still have to fit the passenger's side.

[joec500]

Originally Posted by Former_Boosted_IS

I have been going through in my head what I was going to say if they fit. I really had everything down nicely, well unfortunately....

Just kidding, THEY FIT!!! I just finished the driver's side and here is what I noted:

1. NO bulge on the rear section
2. The clips slide in perfectly, just like OEM
3. The front came up 1-2 mm short, but not noticeable
4. The material is FAR superior to the last mold. Night and day difference
5. Paint appears to be a spot on match

The two problems I encountered were:

1. The holes were the plastic screws go in under the side skirt were not matched up perfectly
2. The front where the skirt meets the fender liner has a small gap.

With respect to the gap, I am not sure if M-Force can make that area longer or we can just gap it with fender liner.

I will have more info later. You guys know I have been honest and critical when appropriate. The truth is M-Force Design finally did it. This is not 100%, but very acceptable to me.

Now, I still have to fit the passenger's side.

Sounds promising.....If i get 95% or higher fitment I will be happy...Post pics when you can IS...Thanks for the timely update!

[XPO186]

Originally Posted by Former_Boosted_IS

I have been going through in my head what I was going to say if they fit. I really had everything down nicely, well unfortunately....

Just kidding, THEY FIT!!! I just finished the driver's side and here is what I noted:

1. NO bulge on the rear section
2. The clips slide in perfectly, just like OEM
3. The front came up 1-2 mm short, but not noticeable
4. The material is FAR superior to the last mold. Night and day difference
5. Paint appears to be a spot on match

The two problems I encountered were:

1. The holes were the plastic screws go in under the side skirt were not matched up perfectly
2. The front where the skirt meets the fender liner has a small gap.

With respect to the gap, I am not sure if M-Force can make that area longer or we can just gap it with fender liner.

I will have more info later. You guys know I have been honest and critical when appropriate. The truth is M-Force Design finally did it. This is not 100%, but very acceptable to me.

Now, I still have to fit the passenger's side.

Yup. Pretty much spot on.

However, for me (both sides) the holes where the plastic screws go into the undercarriage are lined up perfectly. The rear portion with the clips, the 8mm screw holes in the rear wheel well, and the plastic "screw" holes under the plastic thing in the door jamb all line up spot on... but keep in mind that that's a double edged sword because there is practically no wiggle room for adjustment and tweaking.

My thing is that the front has some bulge on both sides, but as cn555ic said apparently it's an easy fix. Now, I have to attempt to hook up w/Pat again for my 'adjustments' since my set is "ver3 preadjustment" version.

[ArmyBimmerDude]

Thank god. Post up pics!!