What did you do to your car today?

Hackslash · 06-19-2016, 03:51 PM

Quote:

Originally Posted by Seattlesquash

That defines clean, nice job. How much work to do vanos? I still never touched them at 130k miles but had no reason.

I didn't have much reason to clean them either. I'm the second owner of the car though, so it gave me peace of mind to see that the previous owner was keeping up with the oil changes. Not much work at all if you take it slow and have a 10mm socket it's really easy. I just cleaned with MAF cleaner (spray it in the holes till it runs clear) then reused that on the MAF sensor.

The air filter was another story... glad I did that change. Previous owner had an aftermarket filter that was super dirty, plus the box had a whole bunch of sand in it. All 3 of these jobs are very easy for a casual DIY person.

Have fun.

dspence44 · 06-19-2016, 04:31 PM

Quote:

Originally Posted by the storm breaks

Got the side trim, mirrors and roof wrapped. Tint next

This looks great!! What did it cost you to get the roof wrapped? That's something that I want to get done and would rather not tackle the DIY....

Seattlesquash · 06-19-2016, 05:30 PM

Quote:

Originally Posted by Hackslash

Quote:

Originally Posted by Seattlesquash

That defines clean, nice job. How much work to do vanos? I still never touched them at 130k miles but had no reason.

I didn't have much reason to clean them either. I'm the second owner of the car though, so it gave me peace of mind to see that the previous owner was keeping up with the oil changes. Not much work at all if you take it slow and have a 10mm socket it's really easy. I just cleaned with MAF cleaner (spray it in the holes till it runs clear) then reused that on the MAF sensor.

The air filter was another story... glad I did that change. Previous owner had an aftermarket filter that was super dirty, plus the box had a whole bunch of sand in it. All 3 of these jobs are very easy for a casual DIY person.

Have fun.

Thanks for the info, appreciate it. Yeah I am a bit crazy on the oil change interval so likely ok. Based on your description it should be pretty easy. Thanks.

F22_Raptor · 06-20-2016, 04:25 AM

Just changed the oil and filter. German Castrol 0w40 from walmart lol.

Socket · 06-20-2016, 08:33 AM

Dis

Welcome to NBA Jam · 06-20-2016, 12:35 PM

Quality time with the DA polisher

GreaseMonkey · 06-20-2016, 02:13 PM

Rerouted my ipod connection from the glove box to the center console.

Cleaned and conditioned the leather, but this times it seems to have left a milky haze in spots on the black leather...

7786 · 06-20-2016, 10:56 PM

Finally got around to installing the near final version of my gauge pod integrated vent:

F22_Raptor · 06-21-2016, 05:40 AM

Got some new exhaust tips on ebay for $25.

stashtrey · 06-21-2016, 06:03 AM

Installed my new M3 shadow line/Titan interior trim. Stoked. Great color. Just need to figure out the center console sole. Wrapped in silver carbon fiber fabric. I have black/shadow line-ish carbon fiber fabric (not vinyl) and think I'll rewrap to that for a more consistent color palette.

Bimmer 808 · 06-21-2016, 01:13 PM

Quote:

Originally Posted by stashtrey

Installed my new M3 shadow line/Titan interior trim. Stoked. Great color. Just need to figure out the center console sole. Wrapped in silver carbon fiber fabric. I have black/shadow line-ish carbon fiber fabric (not vinyl) and think I'll rewrap to that for a more consistent color palette.

Didn't happen unless you show pics

stashtrey · 06-21-2016, 04:18 PM

Quote:

Originally Posted by Bimmer 808

Didn't happen unless you show pics

Pics to-come soon!

aohus · 06-21-2016, 04:22 PM

Quote:

Originally Posted by GreaseMonkey

Finally replaced my leaking fuel injectors, new plugs, RB PCV, and cleaned out the water drains.

And the award for leakiest injectors goes to....Cylinders 2 and 3. Let's give them a hand folks!

Just look at all the fuel that soaked into the cardboard from them:

And the fouled plugs:

#1 injector seemed to be in ok shape, but who knows what kind of longevity it has at 66k miles. If anyone needs an -09 let me know.

Isn't this an issue with the valve cover gasket? Seems like a really common issue. Cylinders 2 and 3 were leaking for me when i replaced the spark plugs.

OnlyDriveGerman · 06-21-2016, 05:04 PM

Quote:

Originally Posted by 7786

Finally got around to installing the near final version of my gauge pod integrated vent:

Nice custom work dude.

SilverStreak18 · 06-21-2016, 07:25 PM

Got rid of the hard brake booster vacuum line and used 3/8" silicon line to run it under the intake manifold, back to the firewall and then to the connection at the booster. Also moved my vacuum canisters from their temporary location to their permanent spot until I go ST. Took about an hour or so.

Before:

After:

Monster900 · 06-21-2016, 09:31 PM

Quote:

Originally Posted by aohus

Quote:

Originally Posted by GreaseMonkey

Finally replaced my leaking fuel injectors, new plugs, RB PCV, and cleaned out the water drains.

And the award for leakiest injectors goes to....Cylinders 2 and 3. Let's give them a hand folks!

Just look at all the fuel that soaked into the cardboard from them:

And the fouled plugs:

#1 injector seemed to be in ok shape, but who knows what kind of longevity it has at 66k miles. If anyone needs an -09 let me know.

Isn't this an issue with the valve cover gasket? Seems like a really common issue. Cylinders 2 and 3 were leaking for me when i replaced the spark plugs.

I bet his valve cover is cracked as there is clearly oil on injectors and spark plugs from cylinder 2 and 3.

Seattlesquash · 06-21-2016, 11:23 PM

Quote:

Originally Posted by Socket

Dis

Sexy!

GreaseMonkey · 06-22-2016, 09:47 AM

Quote:

Originally Posted by Monster900

I bet his valve cover is cracked as there is clearly oil on injectors and spark plugs from cylinder 2 and 3.

Possibly, though I had mine replaced a couple years ago and I'm sure they did not clean up the oil as well as they claimed.

That being said, a cracked cover is a possibility, but wouldn't there be oil higher up on the injector as well? Note: I am not a proficient or educated mechanic, so please explain why oil would only start to collect below the decoupler?

EzequielR · 06-22-2016, 12:39 PM

Quote:

Originally Posted by GreaseMonkey

Quote:

Originally Posted by Monster900

I bet his valve cover is cracked as there is clearly oil on injectors and spark plugs from cylinder 2 and 3.

Possibly, though I had mine replaced a couple years ago and I'm sure they did not clean up the oil as well as they claimed.

That being said, a cracked cover is a possibility, but wouldn't there be oil higher up on the injector as well? Note: I am not a proficient or educated mechanic, so please explain why oil would only start to collect below the decoupler?

Wouldn't that happen if his VCG is going? My plugs looked like that when I changed them, replaced the VCG because it was past due... no more leaking. But of coarse I made sure I had no cracks in the valve cover.

GreaseMonkey · 06-22-2016, 01:46 PM

I'll have to look over the cover high and low to check for cracks. Otherwise I'll assume it's just the gasket (surprise surprise, a gasket went bad on this motor).

MR.BLUECOLLARMAN · 06-23-2016, 11:57 AM

Debating on which I should install ...hmmm

:

SilverStreak18 · 06-23-2016, 12:37 PM

Quote:

Originally Posted by MR.BLUECOLLARMAN

Debating on which I should install ...hmmm

:

The carbon fiber looks better with the silver paint IMO.

06-20-2016, 04:25 AM	#3546
F22_Raptor Lieutenant 115 Rep 424 Posts Drives: 2008 328i Join Date: Aug 2015 Location: Touring CA iTrader: (0)	Just changed the oil and filter. German Castrol 0w40 from walmart lol.
	Appreciate 1 Quote

06-20-2016, 08:33 AM	#3547
Socket Lieutenant General 4685 Rep 11,957 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	Dis Attached Images
	Appreciate 5 Quote

06-20-2016, 12:35 PM	#3548
Welcome to NBA Jam Is it the shoes!? 3893 Rep 5,111 Posts Drives: (Sold) 2011 E92 335i ZMP 6MT Join Date: Mar 2014 Location: USA iTrader: (1)	Quality time with the DA polisher
	Appreciate 1 Quote

06-20-2016, 02:13 PM	#3549
GreaseMonkey Second Lieutenant 54 Rep 258 Posts Drives: '09 335i xDrive Join Date: Feb 2013 Location: CT iTrader: (4)	Rerouted my ipod connection from the glove box to the center console. Cleaned and conditioned the leather, but this times it seems to have left a milky haze in spots on the black leather... __________________ His: '21 Kia Telluride SX Hers::'19 Lexus Ux250h F-sport His: '67 Jacobsen Tractor Formerly His:'09 335 xdrive
	Appreciate 0 Quote

06-20-2016, 10:56 PM	#3550
7786 Second Lieutenant 32 Rep 273 Posts Drives: 2011 535xi Join Date: Apr 2013 Location: Iowa iTrader: (5)	Finally got around to installing the near final version of my gauge pod integrated vent: __________________ https://www.shapeways.com/shops/7786
	Appreciate 2 Quote

06-21-2016, 05:40 AM	#3551
F22_Raptor Lieutenant 115 Rep 424 Posts Drives: 2008 328i Join Date: Aug 2015 Location: Touring CA iTrader: (0)	Got some new exhaust tips on ebay for $25.
	Appreciate 1 Quote

06-21-2016, 06:03 AM	#3552
stashtrey Lieutenant Colonel 295 Rep 1,834 Posts Drives: 08 E90 335xi TiAg Join Date: Dec 2012 Location: Sacramento, CA iTrader: (8) Garage List 2008 E90 335xi Sedan [0.00]	Installed my new M3 shadow line/Titan interior trim. Stoked. Great color. Just need to figure out the center console sole. Wrapped in silver carbon fiber fabric. I have black/shadow line-ish carbon fiber fabric (not vinyl) and think I'll rewrap to that for a more consistent color palette.
	Appreciate 0 Quote

06-21-2016, 07:25 PM	#3557
SilverStreak18 Private First Class 41 Rep 198 Posts Drives: 08 SGM 335i Coupe Join Date: Jun 2016 Location: SC iTrader: (2)	Got rid of the hard brake booster vacuum line and used 3/8" silicon line to run it under the intake manifold, back to the firewall and then to the connection at the booster. Also moved my vacuum canisters from their temporary location to their permanent spot until I go ST. Took about an hour or so. Before: After:
	Appreciate 1 Quote

06-22-2016, 01:46 PM	#3562
GreaseMonkey Second Lieutenant 54 Rep 258 Posts Drives: '09 335i xDrive Join Date: Feb 2013 Location: CT iTrader: (4)	I'll have to look over the cover high and low to check for cracks. Otherwise I'll assume it's just the gasket (surprise surprise, a gasket went bad on this motor). __________________ His: '21 Kia Telluride SX Hers::'19 Lexus Ux250h F-sport His: '67 Jacobsen Tractor Formerly His:'09 335 xdrive
	Appreciate 0 Quote

06-23-2016, 11:57 AM	#3563
MR.BLUECOLLARMAN Second Lieutenant 48 Rep 270 Posts Drives: E90 06 325i Sedan Silver Join Date: Dec 2015 Location: South Carolina iTrader: (0)	Debating on which I should install ...hmmm: Attached Images
	Appreciate 0 Quote