[Manberg]

Fixed my oil cooler gasket and hose leak. Finally got my flex fuel wires connected up. Going to fill up some e85 before a cruise with some friends in LA tomorrow.

[John 070]

Not my car but my wife's....found a leak in her tire and plugged it. Soapy water never fails....

[mantis]

found out my ac took a shit, 100 all week. at least theres a thread on this issue, thanks forum members

[xyaaeg234g234]

Still currently waiting on my Amazon Prime next day shipment of a new drivers rear window regulator.... but they have until 9PM so it's gonna be a late night install, weeeeee.

[Hacksaw]

Installed Turner MS pedal set

[Socket]

Installed CF CSL truck

[xyaaeg234g234]

Originally Posted by Socket

Installed CF CSL truck

I swear if you and I were to design our own BMWs without limitations they would not be very far off. The SG and CF combo with the strip looks perfect on that rear end, the diffusor in CF just sets the whole damn thing off.

Bravo once again Mr. Socket.

[Socket]

Originally Posted by prodigymix

I swear if you and I were to design our own BMWs without limitations they would not be very far off. The SG and CF combo with the strip looks perfect on that rear end, the diffusor in CF just sets the whole damn thing off.

Bravo once again Mr. Socket.

My thoughts exactly lol Thanks Prodg dude

[mantis]

i shopped for all kinds of parts but have only ordered sun shade, and side fins.

shopping headlight kits, loving the demon eye setups, but wrgb has all colors

found ac blower motor but need to check if its resistor, harness or just stuck needing lube

also looking for

full led int kit

led lic plate lights

and other small custom stuffs

[Operator Mo]

Had a performance exhaust installed. Extensive field testing currently underway.

[etai43]

Finally replaced my vacuum hoses with verocious motorsports silicone hoses, still need to replace the 2 lines between oil filter cap and airbox. The front wastegate was a pain in the a$$ to get on but i managed.

http://www.e90post.com/forums/showthread.php?t=894084
(used this post for reference, very helpful)

[Jake335is]

20% ceramic tint
The older i get the lighter the tint gets, btw don't be afraid of 20%. I guess we're lucky in Colorado (mile high) " Window tinting permitted as long as it allows at least 27% VLT"..

[Jake335is]

Originally Posted by Black n54is

Haha nice! We're tip buddies ..got the exact same ones on last weekend, they look great huh

lol we are btw i love what you've done to your car

[N54Twin]

Finally got the tank remove, what a pain in the ass this job is.
I put silicone on the hole i made to it.

New one going in shortly and then get my self back on the road.

[Bimmer 808]

Used Carly BMW to code hidden features for M235i. Close windows and sunroof while holding down remote key? Yes please!

[Greyfox]

Cleaned and polished my headlights and foglights. Foglights need to be removed and sanded and polished because of the knicks and dings.

Also spent a bit of time with a band saw and made me a set of unofficial BMW Jack Stands that fit the jacking pockets.

[mantis]

Hand wash and wax. About to tear apart the dash for the blower motto repair, then detail inside

[xyaaeg234g234]

Originally Posted by prodigymix

Still currently waiting on my Amazon Prime next day shipment of a new drivers rear window regulator.... but they have until 9PM so it's gonna be a late night install, weeeeee.

Amazon delivery guy showed up just before I sat down for dinner around 6 but I didn't start until about 12 or 1AM... wrapped it up at 3ish after trying for a while to figure out how to raise the window manually. It was quite a pain since the motor was locked in the down position and taught on the window but I eventually got it without breaking anything by reinstalling the switch and giving a bunch of slack to the wire to allow the window to raise.

Out with the old, in with the new! BMW wanted $600-$800 and half a day to do this, I got it done with a $60 part (let's hope it holds up!) and a couple hours of learning and doing.

Old busted plastic piece can be seen near the top by the spring/wire:

View post on imgur.com

And here's the new one.. Lady 749-468 of the house Dorman, brought forth by the knights of Amazonia, holder of glass, savior of wallets, and rightful ruler of the land of four windows.

View post on imgur.com

[mantis]

Originally Posted by prodigymix

Amazon delivery guy showed up just before I sat down for dinner around 6 but I didn't start until about 12 or 1AM... wrapped it up at 3ish after trying for a while to figure out how to raise the window manually. It was quite a pain since the motor was locked in the down position and taught on the window but I eventually got it without breaking anything by reinstalling the switch and giving a bunch of slack to the wire to allow the window to raise.

Out with the old, in with the new! BMW wanted $600-$800 and half a day to do this, I got it done with a $60 part (let's hope it holds up!) and a couple hours of learning and doing.

Old busted plastic piece can be seen near the top by the spring/wire:

View post on imgur.com

And here's the new one.. Lady 749-468 of the house Dorman, brought forth by the knights of Amazonia, holder of glass, savior of wallets, and rightful ruler of the land of four windows.

View post on imgur.com

just did my acura mdx, same knights saved the day

[mantis]

blower motor was the same issue as a thread here, resistor unit plug burnt up, motor and plug parts ordered. blower motor took 5 minutes to drop out, with only removing 2 screws

[N54Twin]

New tank is in, had some problems putting back the driveshaft, but is in.

New fuel filter
M5 pull bars and new set of bolts

[Ruddigger]

Installed these side skirt extensions that I designed.