Sponsored by The Tire Rack

[lpphreakx06]

Any way I can run 18x9.5 +30 in the front?

[Aija]

Originally Posted by Robmaster

i run 19x9.5 ET20 with a 255/30/19 Goodyerar Eagle F1 asym. in the rear.
my fender are slightly rolled. it still rubs over bumps. so i have to roll my fenders more.

with a smaller tire, i should possible with just a bit rolled fenders.

is your car dropped by chance?

[montini]

I have a 08 335xi. Would it be a wise move to purchase my friend's e46 M3 19" BBS LM? He has 235 front, 255 back. I don't know ET of his wheels, but he has a little left in his arches.

[hun77777]

Originally Posted by montini

I have a 08 335xi. Would it be a wise move to purchase my friend's e46 M3 19" BBS LM? He has 235 front, 255 back. I don't know ET of his wheels, but he has a little left in his arches.

there are plenty people here on the forum running M3 offset LMs with little bit of fender rolling but for 255, heck, i'll just slap it on and see if you even need it.

[lpphreakx06]

Originally Posted by lpphreakx06

Any way I can run 18x9.5 +30 in the front?

It fits!

[montini]

Damn those Volk Rays RE30 look really nice, bet they are light as hell too

[montini]

@hun77777

So nothing gets in the way? I have the xDrive, that's what I am worried about. I can always have the centers machined to slightly higher ET and have my fenders rolled a bit

[Got Rice?]

will this fit? the rear i can roll my fenders, how about the fronts?
19x8.5 +20
19x9.5 +21

[Marcus-SanDiego]

Suspension: KW v2

Tires: Michelin PS2/235/35/19 & 265/30/19 (rear)

BBS LM:
Front: 19X8.5 ET 32
Rear: 19X9.5 ET 32

Got rubbing in the rear -- occasionally.

Rolled the fenders. No more rubbing.

[hun77777]

Originally Posted by montini

@hun77777

So nothing gets in the way? I have the xDrive, that's what I am worried about. I can always have the centers machined to slightly higher ET and have my fenders rolled a bit

with slight fender rolling in the rear (what i mean by "slight" is just a top of arch area) should do the job. i don't think machining the wheel is a good idea unless you have to. i'll try to slap it on first to see where you are at. if it rubs, then i'll give it a slight roll in the back. still rubs, then i'll give neg camber. by then your problem should be gone especially if you are running 255 or 265.

[Robmaster]

Originally Posted by Got Rice?

will this fit? the rear i can roll my fenders, how about the fronts?
19x8.5 +20
19x9.5 +21

that's like my setup.

i have:

19x8.5 +20 (225/35/19)
19x9.5 +20 (255/30/19)

in front i have no problem, but the rear still rubs with my slightly rolled fenders. so i need to roll my fenders more.

here some pics (sorry, the arn't the bests)

rear

[hun77777]

Originally Posted by Robmaster

what front lip is that? looking good

[jun]

i'm running a 235/265 set up, 8.5F +35 10R +38. i will be running H&R sport springs.

any recommendations on spacer sizes? I was thinking 5mm in the rear and 3mm in the front - would that be adequate? does anybody even make a 3mm spacer?

[hun77777]

Originally Posted by jun

i'm running a 235/265 set up, 8.5F +35 10R +38. i will be running H&R sport springs.

any recommendations on spacer sizes? I was thinking 5mm in the rear and 3mm in the front - would that be adequate? does anybody even make a 3mm spacer?

merry christmas!
http://www.ecstuning.com/BMW-E92-335...heels/Spacers/

[jun]

sweet. now only if they came with black bolts.

[Dustin@AEp]

Originally Posted by Got Rice?

are you lowered?

Not lowered, but I must say that the rear sits pretty low on this car stock.

The front on the other hand....way too high

[kamek]

Originally Posted by montini

I am planning on eibach pro springs front/zsp rear or h&r springs all round on my 335xi. I would like to buy Enkei RPF1. Looked at their site :

8,5x19" ET 35 (235 tires)
10x19" ET 25 (265 tires)

Would this setup work on a e92 335i xDrive? Want them to look just right but not rub the fenders and there has to be place for a BBK later on.

Need help! Thanks.

You'll need to roll and prob run some neg camber in the rear to fit the 25 offset

[Robmaster]

Originally Posted by hun77777

what front lip is that? looking good

that's the lip which I develop with the German manufacturer MOR-Vision.

we are in the testing phase, hope it should release soon.

here a link to the post which i make:

http://www.e90post.com/forums/showthread.php?t=391261

[Got Rice?]

looks like ill be going with
19x8.5 +15 with 215/35/19
19x9.5 +20 with 235/35/19

my car is slammed i hope the fronts wont rub or hit the fender....

[hun77777]

Originally Posted by Got Rice?

looks like ill be going with
19x8.5 +15 with 215/35/19
19x9.5 +20 with 235/35/19

my car is slammed i hope the fronts wont rub or hit the fender....

wow that's hella stretch look... report back how it goes...

[kamek]

19x10 +23, 265/30 Hankook Ventus V12, -2.4 camber



Yes, it rubs. Trying to figure out a solution to make these fit... Absolutely love the stance/look. Thinking of running -2.6 camber if the shop (Matt@Camber-Toe) can keep the toe adjustments in spec. I need to make these fit!

[gibbiesmalls]

Curious whether this will work on a E92 likely to be dropped on coilovers (KW V2)

Front: 19x8 et 38, Falken 452 235/35z/19
Rear: 19x10 et 26, Falken 452 265/30z/19


Any help would be greatly appreciated!


Gibbie