BMW CODING success

mapleridge · 04-09-2012, 12:45 PM

Hi I am having errors in inpa and ncs expert. I am in windows xp 32 bit. With the famous tool from ebay. Car is an 01/07 build e90.

I attached the inpa error below. Anyone have any idea?

cn555ic · 04-09-2012, 01:36 PM

Quote:

Originally Posted by mapleridge

Hi I am having errors in inpa and ncs expert. I am in windows xp 32 bit. With the famous tool from ebay. Car is an 01/07 build e90.

I attached the inpa error below. Anyone have any idea?

Unless you read German. What does that translate to? There are English versions of INPA and NCS expert. Don't need to run the latest and greatest as the older stuff INPA 5.02 and Ediabas 6.4.7, NCS 3.01 works perfect

mapleridge · 04-09-2012, 02:31 PM

Quote:

Originally Posted by cn555ic

Unless you read German. What does that translate to? There are English versions of INPA and NCS expert. Don't need to run the latest and greatest as the older stuff INPA 5.02 and Ediabas 6.4.7, NCS 3.01 works perfect

******* helped me because I am a serious newb with this. He sent me these files. I read the inpa faq and it appears that it says ediabas is open on another program or such.

Yvette · 04-10-2012, 01:52 AM

guys, which command is to disable idrive disclaimer? and is it just nicht?

mapleridge · 04-10-2012, 02:38 AM

******* helped me out once again. I had a number of problems including:

USB device was not set to Comm1 and latency 1
I did not have the proper Daten files
May have been a problem with my profile in NCS Expert

Anyways, he coded out the errors for my LCI rear end upgrade. Thank you *******!

jphughan · 04-10-2012, 09:12 AM

Quote:

Originally Posted by e90sexion

guys, which command is to disable idrive disclaimer? and is it just nicht?

Depends which iDrive you have, check the spreadsheet.

Chewy734 · 04-10-2012, 09:39 AM

Can someone help me figure out what needs to be coded for an LCI taillight retrofit? I saw someone else asked this a while back, and they found the answer through PM and never posted the solution. Thanks!

jphughan · 04-10-2012, 10:33 AM

Quote:

Originally Posted by Chewy734

Can someone help me figure out what needs to be coded for an LCI taillight retrofit? I saw someone else asked this a while back, and they found the answer through PM and never posted the solution. Thanks!

It depends heavily on what model year and body style your car is, because there are different hardware lighting modules in different cars, and the LCI retrofit works differently on each one. There's a thread about this that has a lot of possibilities if you want to search for it and try those suggestions though.

Chewy734 · 04-10-2012, 10:48 AM

ok, thanks, I'll give it a shot.

Yvette · 04-10-2012, 12:25 PM

Quote:

Originally Posted by jphughan

Depends which iDrive you have, check the spreadsheet.

mine is ccc, i am asking because I dont get it. is it nicht to disable?

jphughan · 04-10-2012, 12:35 PM

Quote:

Originally Posted by e90sexion

mine is ccc, i am asking because I dont get it. is it nicht to disable?

It's nicht_aktiv. If the notes don't give specific values for coding a particular on/off option and an existing value is aktiv or nicht_aktiv, then switching to the opposite of whatever is there will usually get you what you want. There are only a few options that use a wert value or something else entirely.

mapleridge · 04-10-2012, 01:28 PM

Quote:

Originally Posted by Chewy734

Can someone help me figure out what needs to be coded for an LCI taillight retrofit? I saw someone else asked this a while back, and they found the answer through PM and never posted the solution. Thanks!

try this thread

http://www.e90post.com/forums/showth...light=retrofit

Yvette · 04-10-2012, 02:58 PM

Quote:

Originally Posted by jphughan

It's nicht_aktiv. If the notes don't give specific values for coding a particular on/off option and an existing value is aktiv or nicht_aktiv, then switching to the opposite of whatever is there will usually get you what you want. There are only a few options that use a wert value or something else entirely.

thanks a lot!

strams · 04-10-2012, 03:00 PM

Quote:

Originally Posted by elitefusion

anyway to get it to work on windows 7 64bit?

VMWare could help you

mapleridge · 04-10-2012, 07:22 PM

Quote:

Originally Posted by strams

VMWare could help you

+1

I used VMware because I had a 64bit Windows 7. Vmware handled it no problem. You will need a copy of XP 32bit as well.

FlowState · 04-10-2012, 10:03 PM

Coded my car last week. I couldn't get the double flash hazards. Default setting for BLINKIMPULS was Wert_01 already. changing it to anything else made it throw a fault error.

Anyone know what you're supposed to change the value to?

Dziqsek_ · 04-10-2012, 10:26 PM

DOPPELBLINKIMPULS_WARNBLK to aktiv

Thats all

FlowState · 04-10-2012, 10:37 PM

Quote:

Originally Posted by *******_

DOPPELBLINKIMPULS_WARNBLK to aktiv

Thats all

I don't have DOPPELBLINKIMPULS_WARNBLK

I only have BLINKIMPULS_WARNBLK & BLINKIMPULS_CRASH. I'm in a 2006 325i with 05 build date.

both show Wert 02 through Wert 05 being higher flash rates, but when I change to them, it doesn't allow me to.

JunkStory · 04-11-2012, 04:52 AM

sorry for this newb question, but can coding disable the O2 sensor check for catless downpipes?

gaifaun · 04-11-2012, 05:14 AM

Quote:

Originally Posted by JunkStory

sorry for this newb question, but can coding disable the O2 sensor check for catless downpipes?

not at the moment. i wish too man

JunkStory · 04-11-2012, 06:15 AM

Quote:

Originally Posted by gaifaun

not at the moment. i wish too man

Thats too bad, but thanks for the response man!

Dziqsek_ · 04-11-2012, 07:28 AM

Pm me with your full frm.trc

Quote:

Originally Posted by DUI Elite

I don't have DOPPELBLINKIMPULS_WARNBLK

I only have BLINKIMPULS_WARNBLK & BLINKIMPULS_CRASH. I'm in a 2006 325i with 05 build date.

both show Wert 02 through Wert 05 being higher flash rates, but when I change to them, it doesn't allow me to.

04-09-2012, 12:45 PM	#3873
mapleridge Banned 155 Rep 2,638 Posts Drives: E90 N52 AT Join Date: Apr 2011 Location: Vancouver, BC iTrader: (4)	Hi I am having errors in inpa and ncs expert. I am in windows xp 32 bit. With the famous tool from ebay. Car is an 01/07 build e90. I attached the inpa error below. Anyone have any idea? Attached Images
	Appreciate 0 Quote

04-10-2012, 01:52 AM	#3876
Yvette Major General 772 Rep 7,409 Posts Drives: M Join Date: Sep 2006 Location: Vancouver iTrader: (19)	guys, which command is to disable idrive disclaimer? and is it just nicht?
	Appreciate 0 Quote

04-10-2012, 02:38 AM	#3877
mapleridge Banned 155 Rep 2,638 Posts Drives: E90 N52 AT Join Date: Apr 2011 Location: Vancouver, BC iTrader: (4)	***** helped me out once again. I had a number of problems including: USB device was not set to Comm1 and latency 1 I did not have the proper Daten files May have been a problem with my profile in NCS Expert Anyways, he coded out the errors for my LCI rear end upgrade. Thank you *****!
	Appreciate 0 Quote

04-10-2012, 09:39 AM	#3879
Chewy734 Major General 492 Rep 6,798 Posts Drives: 2006 BMW 330i ZPP, ZSP Join Date: Dec 2008 Location: LA, CA iTrader: (15)	Can someone help me figure out what needs to be coded for an LCI taillight retrofit? I saw someone else asked this a while back, and they found the answer through PM and never posted the solution. Thanks! __________________ Currently for sale: [19" Linea Corse LC818 wheel], [19" Fallen FK452 tire]
	Appreciate 0 Quote

04-10-2012, 10:48 AM	#3881
Chewy734 Major General 492 Rep 6,798 Posts Drives: 2006 BMW 330i ZPP, ZSP Join Date: Dec 2008 Location: LA, CA iTrader: (15)	ok, thanks, I'll give it a shot. __________________ Currently for sale: [19" Linea Corse LC818 wheel], [19" Fallen FK452 tire]
	Appreciate 0 Quote

04-10-2012, 10:03 PM	#3888
FlowState ///M Driver 90 Rep 1,954 Posts Drives: 07 JB E90 335, 20 TRM F97 X3M Join Date: Jan 2011 Location: Chicago, IL iTrader: (4)	Coded my car last week. I couldn't get the double flash hazards. Default setting for BLINKIMPULS was Wert_01 already. changing it to anything else made it throw a fault error. Anyone know what you're supposed to change the value to?
	Appreciate 0 Quote

04-10-2012, 10:26 PM	#3889
Dziqsek_ Banned 37 Rep 412 Posts Drives: e91 320d Join Date: Feb 2012 Location: Jelenia Gora ( Lower Silesia ) iTrader: (0)	DOPPELBLINKIMPULS_WARNBLK to aktiv Thats all
	Appreciate 0 Quote

04-11-2012, 04:52 AM	#3891
JunkStory Major 160 Rep 1,307 Posts Drives: E92 M3, 8V RS3 Join Date: May 2008 Location: 98230 iTrader: (3)	sorry for this newb question, but can coding disable the O2 sensor check for catless downpipes?
	Appreciate 0 Quote